Large area van der Waals epitaxy of II–VI CdSe thin films for flexible optoelectronics and full-color imaging

Nano Research ◽  
2021 ◽  
Author(s):  
Wenwu Pan ◽  
Junliang Liu ◽  
Zekai Zhang ◽  
Renjie Gu ◽  
Alexandra Suvorova ◽  
...  
Keyword(s):  
Thin Films ◽  
Van Der Waals ◽  
Large Area ◽  
Color Imaging ◽  
Full Color

scholarly journals Substrate induced tuning of compressive strain and phonon modes in large area MoS 2 and WS 2 van der Waals epitaxial thin films

2017 ◽  
Vol 470 ◽  
pp. 51-57 ◽  
Author(s):  
Rajib Sahu ◽  
Dhanya Radhakrishnan ◽  
Badri Vishal ◽  
Devendra Singh Negi ◽  
Anomitra Sil ◽  
...  
Keyword(s):  
Thin Films ◽  
Compressive Strain ◽  
Van Der Waals ◽  
Epitaxial Thin Films ◽  
Large Area ◽  
Phonon Modes

Thermodynamic Stability of Hexagonal and Rhombohedral Bn at Cvd Conditions from Van der Waals Corrected First Principles Calculations

2019 ◽  
Author(s):  
Henrik Pedersen ◽  
Björn Alling ◽  
Hans Högberg ◽  
Annop Ektarawong
Keyword(s):  
Thin Films ◽  
Thermodynamic Stability ◽  
First Principles ◽  
Thermal Equilibrium ◽  
Density Functional ◽  
Van Der Waals ◽  
Chemical Vapor ◽  
First Principles Calculations ◽  
Functional Theory ◽  
The Stability

Thin films of boron nitride (BN), particularly the sp<sup>2</sup>-hybridized polytypes hexagonal BN (h-BN) and rhombohedral BN (r-BN) are interesting for several electronic applications given band gaps in the UV. They are typically deposited close to thermal equilibrium by chemical vapor deposition (CVD) at temperatures and pressures in the regions 1400-1800 K and 1000-10000 Pa, respectively. In this letter, we use van der Waals corrected density functional theory and thermodynamic stability calculations to determine the stability of r-BN and compare it to that of h-BN as well as to cubic BN and wurtzitic BN. We find that r-BN is the stable sp<sup>2</sup>-hybridized phase at CVD conditions, while h-BN is metastable. Thus, our calculations suggest that thin films of h-BN must be deposited far from thermal equilibrium.

scholarly journals Synthesis of N-CNT/TiO2 composites thin films: surface analysis and optoelectronic properties

2020 ◽  
Vol 183 ◽  
pp. 05002 ◽  
Author(s):  
Hamza Belkhanchi ◽  
Younes Ziat ◽  
Maryama Hammi ◽  
Charaf Laghlimi ◽  
Abdelaziz Moutcine ◽  
...  
Keyword(s):  
Thin Films ◽  
Surface Analysis ◽  
Sol Gel ◽  
Careful Analysis ◽  
Optoelectronic Properties ◽  
Spectroscopic Techniques ◽  
Large Area ◽  
Visible Absorption ◽  
Temperature Solution ◽  
Good Agreement

In this study, we have investigated the surface analysis and optoelectronic properties on the synthesis of N-CNT/TiO2 composites thin films, using sol gel method for a dye synthetized solar cell (DSSC) which is found to be simple and economical route. The titanium dioxide based solar cells are an exciting photovoltaic candidate; they are promising for the realization of large area devices. That can be synthetized by room temperature solution processing, with high photoactive performance. In the present work, we stated comparable efficiencies by directing our investigation on obtaining Sol Gel thin films based on N-CNT/TiO2, by dispersing nitrogen (N) doped carbon nanotubes (N-CNTs) powders in titanium tetraisopropoxyde (TTIP). The samples were assessed in terms of optical properties, using UV—visible absorption spectroscopic techniques. After careful analysis of the results, we have concluded that the mentioned route is good and more efficient in terms of optoelectronic properties. The gap of “the neat” 0.00w% N-CNT/TiO2 is of 3eV, which is in a good agreement with similar gap of semiconductors. The incorporated “w%NCNTs” led to diminishing the Eg with increasing N-CNTs amount. These consequences are very encouraging for optoelectronic field.

scholarly journals Strong texture tuning along different crystalline directions in glass-supported CeO2 thin films by ultrasonic spray pyrolysis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Inti Zumeta-Dubé ◽  
José Manuel García Rangel ◽  
Jorge Roque ◽  
Issis Claudette Romero-Ibarra ◽  
Mario Fidel García Sánchez
Keyword(s):  
Thin Films ◽  
Spray Pyrolysis ◽  
Spray Pyrolysis Technique ◽  
Morphological Characteristics ◽  
Ultrasonic Spray Pyrolysis ◽  
Cost Effective ◽  
Growth Direction ◽  
Large Area ◽  
Smart Windows ◽  
Ultrasonic Spray

AbstractThe strong facet-dependent performance of glass-supported CeO2 thin films in different applications (catalysis, smart windows, etc.) has been the target of diverse fundamental and technological approaches. However, the design of accurate, cost-effective and scalable methods with the potential for large-area coverage that produce highly textured glass-supported CeO2 thin films remains a technological challenge. In the present work, it is demonstrated that under proper tuning conditions, the ultrasonic spray pyrolysis technique enables one to obtain glass-supported polycrystalline CeO2 films with noticeable texture along both the (100) and (111) directions, as well as with randomly oriented crystallites (no texture). The influence of flow rates, solution molarity, and substrate temperature on the texture and morphological characteristics, as well as optical absorption and Raman response of the deposited films, is evaluated. The obtained results are discussed on the basis of the combined dependence of the CeO2-exposed surfaces on the thermodynamic stability of the corresponding facets and the reaction kinetics, which modulate the crystallite growth direction.

scholarly journals The Growth of Semiconductor Thin Films Studied by RHEED

1990 ◽  
Vol 43 (5) ◽  
pp. 583
Author(s):  
GL Price
Keyword(s):  
Thin Films ◽  
Surface Science ◽  
High Vacuum ◽  
High Energy ◽  
Ultra High Vacuum ◽  
Large Area ◽  
Growth Modes ◽  
Semiconductor Thin Films ◽  
Wide Range ◽  
Recent Developments

Recent developments in the growth of semiconductor thin films are reviewed. The emphasis is on growth by molecular beam epitaxy (MBE). Results obtained by reflection high energy electron diffraction (RHEED) are employed to describe the different kinds of growth processes and the types of materials which can be constructed. MBE is routinely capable of heterostructure growth to atomic precision with a wide range of materials including III-V, IV, II-VI semiconductors, metals, ceramics such as high Tc materials and organics. As the growth proceeds in ultra high vacuum, MBE can take advantage of surface science techniques such as Auger, RHEED and SIMS. RHEED is the essential in-situ probe since the final crystal quality is strongly dependent on the surface reconstruction during growth. RHEED can also be used to calibrate the growth rate, monitor growth kinetics, and distinguish between various growth modes. A major new area is lattice mismatched growth where attempts are being made to construct heterostructures between materials of different lattice constants such as GaAs on Si. Also described are the new techniques of migration enhanced epitaxy and tilted superlattice growth. Finally some comments are given On the means of preparing large area, thin samples for analysis by other techniques from MBE grown films using capping, etching and liftoff.

Concisely modularized assembling of graphene-based thin films with promising electrode performance

2019 ◽  
Vol 3 (7) ◽  
pp. 1462-1470 ◽  
Author(s):  
Weiwei Wei ◽  
Rohit L. Vekariy ◽  
Chuanting You ◽  
Yafei He ◽  
Ping Liu ◽  
...  
Keyword(s):  
Thin Films ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Double Layer ◽  
Van Der Waals ◽  
Cellulose Nanofibers ◽  
Van Der Waals Interactions ◽  
Electrode Performance ◽  
Reduced Graphene

Highly dense thin films assembled from cellulose nanofibers and reduced graphene oxide via van der Waals interactions to realize ultrahigh volumetric double-layer capacitances.

Large‐area thin films of silk fibroin prepared by two methods with formic acid as solvent and glycerol as plasticizer

2021 ◽  
pp. 50759
Author(s):  
Francisco Vieira Santos ◽  
Sergio Akinobu Yoshioka ◽  
Marcia Cristina Branciforti
Keyword(s):  
Thin Films ◽  
Formic Acid ◽  
Silk Fibroin ◽  
Large Area

Energy-Saving Driver Design for Full-Color Large-Area LED Display Panel Systems

2014 ◽  
Vol 61 (9) ◽  
pp. 4665-4673 ◽  
Author(s):  
X. Lv ◽  
K. H. Loo ◽  
Y. M. Lai ◽  
Chi K. Tse
Keyword(s):  
Energy Saving ◽  
Large Area ◽  
Full Color

CMOS-Compatible Synthesis of Large-Area, High-Mobility Graphene by Chemical Vapor Deposition of Acetylene on Cobalt Thin Films

ACS Nano ◽  
2011 ◽  
Vol 5 (9) ◽  
pp. 7198-7204 ◽  
Author(s):  
Michael E. Ramón ◽  
Aparna Gupta ◽  
Chris Corbet ◽  
Domingo A. Ferrer ◽  
Hema C. P. Movva ◽  
...  
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
High Mobility ◽  
Chemical Vapor ◽  
Large Area ◽  
Cobalt Thin Films ◽  
Cmos Compatible
Sign in / Sign up

Export Citation Format

Share Document