Microstructure and phase elemental distribution in high-boron multi-component cast irons

2022 ◽  
Vol 29 (1) ◽  
pp. 78-87
Author(s):  
Yu. G. Chabak ◽  
K. Shimizu ◽  
V. G. Efremenko ◽  
M. A. Golinskyi ◽  
K. Kusumoto ◽  
...  
Keyword(s):  
Elemental Distribution ◽  
Cast Irons ◽  
High Boron

scholarly journals A Comparative Study on the Influence of Chromium on the Phase Fraction and Elemental Distribution in As-Cast High Chromium Cast Irons: Simulation vs. Experimentation

Metals ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 30 ◽  
Author(s):  
U. Pranav Nayak ◽  
María Agustina Guitar ◽  
Frank Mücklich
Keyword(s):  
Current Trend ◽  
Phase Fraction ◽  
Elemental Distribution ◽  
Cast Irons ◽  
High Chromium ◽  
Eutectic Carbides ◽  
Surrounding Matrix ◽  
Simulation Techniques ◽  
The Individual ◽  
Cast Condition

The excellent abrasion resistance of high chromium cast irons (HCCIs) stems from the dispersion of the hard iron-chromium eutectic carbides. The surrounding matrix on the other hand, provides sufficient mechanical support, improving the resistance to cracking deformation and spalling. Prior knowledge of the microstructural characteristics is imperative to appropriately design subsequent heat treatments, and in this regard, employing computational tools is the current trend. In this work, computational and experimental results were correlated with the aim of validating the usage of MatCalc simulations to predict the eutectic carbide phase fraction and the elemental distribution in two HCCI alloys, in the as-cast condition. Microstructural observations were carried out using optical microscopy and SEM. The chemical composition and fraction of each phase was measured by electron probe microanalysis and image analysis, respectively. In all cases, the values predicted by the pseudo-equilibrium diagrams, computed with MatCalc, were in accordance with the experimentally determined values. Consequently, the results suggest that time and resource intensive experimental procedures can be replaced by simulation techniques to determine the phase fraction and especially, the individual phase compositions in the as-cast state.

Research on Microstructure and Mechanical Properties of High Boron Cast Steel

2011 ◽  
Vol 189-193 ◽  
pp. 3968-3971 ◽  
Author(s):  
Liu Jie Xu ◽  
Guo Shang Zhang ◽  
Ji Wen Li ◽  
Zhan Wu Dong ◽  
Shi Zhong Wei
Keyword(s):  
Mechanical Properties ◽  
Cast Steel ◽  
Lath Martensite ◽  
High Hardness ◽  
Boron Steel ◽  
Cast Irons ◽  
High Chromium ◽  
Microstructure And Mechanical Properties ◽  
High Boron ◽  
High Boron Cast Steel

In recent years, high chromium cast irons have been widely applied in many fields because they have high hardness and abrasion resistance. However, high chromium cast irons are also expensive because much alloying elements, such as chromium, molybdenum and nickel, are added into them. In order to resolve above question, a new abrasion-resistant steel with high boron content was developed in this paper. The new high boron steel, with 0.6%~0.8%B and 0.65% C, was prepared using sand casting method. The microstructure and mechanical properties were researched. The results show that the solidification microstructure of as-cast high boron steel consists of boride (FeB) and matrix composed of pearlite, ferrite, and bainite. And the borides distributes along grain boundary in the form of network. After quenching at 980°C and tempering at 250°C, the FeB transforms to Fe2B, and the matrix transforms lath martensite. The hardness of as-cast high boron steel is 43HRC, and its impact toughness is 5J/cm2. After heat treatment, they increase to 56 HRC and 7J/cm2, respectively, approximating that of high chromium cast irons. The new high boron cast steel have a potential in stead of high chromium cast irons

Quantitative Electron Energy Loss Mapping

1985 ◽  
Vol 43 ◽  
pp. 404-405
Author(s):  
R.D. Leapman ◽  
C.R. Swyt
Keyword(s):  
Energy Loss ◽  
Electron Energy ◽  
Electron Energy Loss Spectroscopy ◽  
Elemental Concentration ◽  
Core Loss ◽  
Elemental Distribution ◽  
Electron Energy Loss

The intensity of a characteristic electron energy loss spectroscopy (EELS) image does not, in general, directly reflect the elemental concentration. In fact, the raw core loss image can give a misleading impression of the elemental distribution. This is because the measured core edge signal depends on the amount of plural scattering which can vary significantly from region to region in a sample. Here, we show how the method for quantifying spectra due to Egerton et al. can be extended to maps.

X-Ray absorption edge elemental imaging of B. thuringienis

1989 ◽  
Vol 47 ◽  
pp. 212-213
Author(s):  
R. L. Stears
Keyword(s):  
Absorption Edge ◽  
Elemental Distribution ◽  
X Rays ◽  
Differential Absorption ◽  
Synchrotron Source ◽  
High Brightness ◽  
X Ray ◽  
Elemental Imaging ◽  
Cellular Integrity ◽  
X Ray Absorption

Because of the nature of the bacterial endospore, little work has been done on analyzing their elemental distribution and composition in the intact, living, hydrated state. The majority of the qualitative analysis entailed intensive disruption and processing of the endospores, which effects their cellular integrity and composition.Absorption edge imaging permits elemental analysis of hydrated, unstained specimens at high resolution. By taking advantage of differential absorption of x-ray photons in regions of varying elemental composition, and using a high brightness, tuneable synchrotron source to obtain monochromatic x-rays, contact x-ray micrographs can be made of unfixed, intact endospores that reveal sites of elemental localization. This study presents new data demonstrating the application of x-ray absorption edge imaging to produce elemental information about nitrogen (N) and calcium (Ca) localization using Bacillus thuringiensis as the test specimen.

Preparation of cultured astrocytes for x-ray microanalysis

1989 ◽  
Vol 47 ◽  
pp. 988-989
Author(s):  
N.K.R. Smith ◽  
K.E. Hunter ◽  
P. Mobley ◽  
L.P. Felpel
Keyword(s):  
Cultured Cells ◽  
Elemental Content ◽  
Elemental Distribution ◽  
Sprague Dawley ◽  
X Ray ◽  
Cultured Astrocytes ◽  
Freeze Dried ◽  
Ultimate Objective

Electron probe energy dispersive x-ray microanalysis (XRMA) offers a powerful tool for the determination of intracellular elemental content of biological tissue. However, preparation of the tissue specimen , particularly excitable central nervous system (CNS) tissue , for XRMA is rather difficult, as dissection of a sample from the intact organism frequently results in artefacts in elemental distribution. To circumvent the problems inherent in the in vivo preparation, we turned to an in vitro preparation of astrocytes grown in tissue culture. However, preparations of in vitro samples offer a new and unique set of problems. Generally, cultured cells, growing in monolayer, must be harvested by either mechanical or enzymatic procedures, resulting in variable degrees of damage to the cells and compromised intracel1ular elemental distribution. The ultimate objective is to process and analyze unperturbed cells. With the objective of sparing others from some of the same efforts, we are reporting the considerable difficulties we have encountered in attempting to prepare astrocytes for XRMA.Tissue cultures of astrocytes from newborn C57 mice or Sprague Dawley rats were prepared and cultured by standard techniques, usually in T25 flasks, except as noted differently on Cytodex beads or on gelatin. After different preparative procedures, all samples were frozen on brass pins in liquid propane, stored in liquid nitrogen, cryosectioned (0.1 μm), freeze dried, and microanalyzed as previously reported.

X-ray mapping without STEM

1994 ◽  
Vol 52 ◽  
pp. 508-509
Author(s):  
Judith M. Brock ◽  
Max T. Otten
Keyword(s):  
Life Science ◽  
Materials Science ◽  
Chemical Elements ◽  
Full Description ◽  
Scanning System ◽  
Elemental Distribution ◽  
X Ray ◽  
Transmission Electron ◽  
Distribution Of Elements ◽  
Made In

A knowledge of the distribution of chemical elements in a specimen is often highly useful. In materials science specimens features such as grain boundaries and precipitates generally force a certain order on mental distribution, so that a single profile away from the boundary or precipitate gives a full description of all relevant data. No such simplicity can be assumed in life science specimens, where elements can occur various combinations and in different concentrations in tissue. In the latter case a two-dimensional elemental-distribution image is required to describe the material adequately. X-ray mapping provides such of the distribution of elements.The big disadvantage of x-ray mapping hitherto has been one requirement: the transmission electron microscope must have the scanning function. In cases where the STEM functionality – to record scanning images using a variety of STEM detectors – is not used, but only x-ray mapping is intended, a significant investment must still be made in the scanning system: electronics that drive the beam, detectors for generating the scanning images, and monitors for displaying and recording the images.

Some problems and solutions in electron energy loss spectroscopy of cryosections

1993 ◽  
Vol 51 ◽  
pp. 566-567
Author(s):  
Zhifeng Shao ◽  
Ruoya Ho ◽  
Andrew P. Somlyo
Keyword(s):  
High Resolution ◽  
Energy Loss ◽  
Electron Energy ◽  
Electron Energy Loss Spectroscopy ◽  
Biological Research ◽  
Specimen Thickness ◽  
Elemental Distribution ◽  
Electron Dose ◽  
Simple Assumption ◽  
Electron Energy Loss

Electron energy loss spectroscopy (EELS) has been a powerful tool for high resolution studies of elemental distribution, as well as electronic structure, in thin samples. Its foundation for biological research has been laid out nearly two decades ago, and in the subsequent years it has been subjected to rigorous, but by no means extensive research. In particular, some problems unique to EELS of biological samples, have not been fully resolved. In this article we present a brief summary of recent methodological developments, related to biological applications of EELS, in our laboratory. The main purpose of this work was to maximize the signal to noise ratio (S/N) for trace elemental analysis at a minimum dose, in order to reduce the electron dose and/or time required for the acquisition of high resolution elemental maps of radiation sensitive biological materials.Based on the simple assumption of Poisson distribution of independently scattered electrons, it had been generally assumed that the optimum specimen thickness, at which the S/N is a maximum, must be the total inelastic mean free path of the beam electron in the sample.

Elemental Distribution in Pt-Re:Al2O3 Naphtha Reforming Catalysts

1980 ◽  
Vol 38 ◽  
pp. 200-201
Author(s):  
R. L. Freed ◽  
M. J. Kelley
Keyword(s):  
Bimetallic Catalyst ◽  
Supported Catalysts ◽  
Coke Formation ◽  
Materials Characterization ◽  
Metal Catalyst ◽  
Elemental Distribution ◽  
Exact Nature ◽  
Naphtha Reforming ◽  
Reforming Catalysts ◽  
Commercial Introduction

The commercial introduction of Pt-Re supported catalysts to replace Pt alone on Al2O3 has brought improvements to naphtha reforming. The bimetallic catalyst can be operated continuously under conditions which lead to deactivation of the single metal catalyst by coke formation. Much disagreement still exists as to the exact nature of the bimetallic catalyst at a microscopic level and how it functions in the process so successfully. The overall purpose of this study was to develop the materials characterization tools necessary to study supported catalysts. Specifically with the Pt-Re:Al2O3 catalyst, we sought to elucidate the elemental distribution on the catalyst.

STUDY OF HOMOGENEITY, POROSITY AND INTERNAL DEFECTS IN AERATED AND EPS AGGREGATE POLY BRICKS USING NEUTRON RADIOGRAPHY TECHNIQUE

2015 ◽  
Vol 7 (2) ◽  
pp. 1428-1439
Author(s):  
Khurshed Alam ◽  
Md. Sayeedur Rahman ◽  
Md. Mostafizur Rahman ◽  
S. M. Azaharul Islam
Keyword(s):  
Optical Density ◽  
Neutron Radiography ◽  
Density Variation ◽  
Expanded Polystyrene ◽  
Elemental Distribution ◽  
Non Destructive Testing ◽  
Internal Defects ◽  
Destructive Testing ◽  
Radiographic Images ◽  
Non Destructive

A powerful non-destructive testing (NDT) technique is adopted to study the internal defects and elemental distribution/homogeneity and porosity of aerated brick and EPS aggregate poly brick samples. In the present study the internal defects like homogeneity, porosity, elemental distribution, EPS aggregate and aerator distributor in the test samples have been observed by the measurement of gray value/optical density of the neutron radiographic images of these samples. From this measurement it is found that the neutron intensity/optical density variation with the pixel distance of the AOI of the NR images in both expanded polystyrene (EPS) aggregate poly brick and aerated brick samples comply almost same in nature with respect to the whole AOI but individually each AOI shows different nature from one AOI to another and it confirms that the elemental distribution within a AOI is almost homogeneous. Finally it was concluded that homogeneity, elemental distribution in the EPS aggregate poly brick sample is better than that of the aerated brick sample. 

Sign in / Sign up

Export Citation Format

Share Document