Ammonia and Ammonium Acetate Modifications and Characterisation of Activated Carbons from Palm Kernel Shell and Coconut Shell

2018 ◽  
Vol 11 (3) ◽  
pp. 983-993
Author(s):  
Ayodele Rotimi Ipeaiyeda ◽  
Mohammed Iqbal Choudhary ◽  
Shakil Ahmed
Keyword(s):  
Ammonium Acetate ◽  
Activated Carbons ◽  
Palm Kernel ◽  
Coconut Shell ◽  
Palm Kernel Shell

Enhancing Sustainable Recycle Solid Waste to Porous Activated Carbon for Methane Uptake

2014 ◽  
Vol 705 ◽  
pp. 19-23
Author(s):  
Noor Shawal Nasri ◽  
Ramlan Noorshaheeda ◽  
Usman Dadum Hamza ◽  
Jibril Mohammed ◽  
Murtala Musa Ahmed ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Activated Carbons ◽  
Low Cost ◽  
Palm Kernel ◽  
Methane Adsorption ◽  
Coconut Shell ◽  
Palm Kernel Shell ◽  
Freundlich Isotherms ◽  
Palm Shell ◽  
Methane Uptake

Potential agro wastes (i.e palm kernel shell and coconut shell) for producing low cost activated carbon (AC) was investigated. In this study, the activated carbon was produced by carbonization, chemical impregnation with KOH and microwave irradiation. The pyrolysis was carried out at 700 °C in an inert environment for 2 h. Microwave activation was carried out at 400W for 6 minutes. Characteristics of the material were investigated using Fourier transform infrared spectroscopy (FT-IR) analysis and scanning electrode microscopy (SEM). Methane adsorption equilibrium data on the activated carbons produced were obtained using static volumetric method. Microwave palm shell activated carbon (MPAC) and microwave coconut shell activated carbon (MCAC) recorded highest methane uptake of 2.489 and 1.929 mmol/g at 3 bar, 30°C. The adsorption data were correlated with Langmuir and Freundlich isotherms. The results shows that microwave activated carbon from palm shell and coconut shell have good methane adsorption characteristics.

scholarly journals Effect of Chemical Activation on the Adsorption of Heavy Metals Using Activated Carbons from Waste Materials

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
F. T. Ademiluyi ◽  
E. O. David-West
Keyword(s):  
Metal Ions ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Palm Kernel ◽  
Ash Content ◽  
Coconut Shell ◽  
Waste Materials ◽  
Waste Streams ◽  
Palm Kernel Shell ◽  
Recovery Processes

The effect of chemical activation on the adsorption of metals ions (Cr2+, Cu2+, Ni2+, Pb2+, Fe2+, and Zn2+) using waste Nigerian based bamboo, coconut shell, and palm kernel shell was investigated. The bamboo, coconut, and palm kernel shell were carbonized at 400°C–500°C and activated at 800°C using six activating agents. Chemical activation had significant effect on the iodine number and invariably increased the micropores and macropores of the activated carbons produced from bamboo, coconut, and palm kernel shell. It also affected the adsorption of metal ions and the type of carboneous material used for activation. The highest metal ions adsorbed were obtained from bamboo activated with HNO3. The cellulose nitrite formed during the activation of bamboo with HNO3 combined with high pore volume and low ash content of bamboo effectively create more reaction sites for adsorption of different metal ions. This shows that waste bamboo activated with HNO3 can effectively be used to remove metal ions from waste streams and in different metal recovery processes than activated carbon from coconut shell and palm kernel shell.

scholarly journals Innovative Activated Carbon Based on Deep Eutectic Solvents (DES) and H3PO4

2019 ◽  
Vol 5 (3) ◽  
pp. 43 ◽  
Author(s):  
Aloysius Akaangee Pam
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Pyrolysis Temperature ◽  
Activated Carbons ◽  
Choline Chloride ◽  
Palm Kernel ◽  
Total Pore Volume ◽  
Activated Carbon Adsorption ◽  
Palm Kernel Shell ◽  
Activating Agent

In this present work, a novel method for synthesis of palm kernel shell activated carbon was established using DES (choline chloride/urea)/H3PO4 as the activating agent. The pore characterization, morphology, and adsorption properties of the activated carbons were investigated. The activated carbon samples made from the same feedstock at two pyrolysis temperatures (500 and 600 °C) were compared for their ability to adsorb Pb(II) in aqueous solution. The results demonstrated that the production of the activated carbon and adsorptive properties were significantly influenced by the pyrolysis temperature and the ratio of precursor to activating agent. DES/H3PO4 activated carbon (having surface area 1413 m2/g and total pore volume 0.6181 cm3/g) demonstrated good Pb(II) removal. Although all the tested activated carbon samples adsorbed Pb(II) from aqueous solution, they demonstrated different adsorption capabilities according to their various properties. The pyrolysis temperature, however, showed little influence on the activated carbon adsorption of Pb(II) when compared to the impregnation ratio. Their good desorption performance perhaps resulted from the porous structure.

Preparation and Characterization of Single and Mixed Activated Carbons Derived from Coconut Shell and Palm Kernel Shell through Chemical Activation Using Microwave Irradiation System

2017 ◽  
Vol 889 ◽  
pp. 215-220 ◽  
Author(s):  
Siti Anis Mohd Amran ◽  
Khudzir Ismail ◽  
Azil Bahari Alias ◽  
Syed Shatir Asghrar Syed-Hassan ◽  
Ali H. Jawad
Keyword(s):  
Activated Carbon ◽  
Pore Size ◽  
Iodine Number ◽  
Average Pore Size ◽  
Palm Kernel ◽  
Coconut Shell ◽  
Activation Process ◽  
Average Pore ◽  
Palm Kernel Shell ◽  
Percentage Removal

Single and mixed coconut shell (CS) and palm kernel shell (PKS) were successfully converted to activated carbon by using potassium hydroxide (KOH) as activating agent. Mixed activated carbon was produced from coconut shell: palm kernel shell at different KOH concentrations of 30%, 40% and 50%. Activation process was performed in a conventional microwave oven at fixed power and time of 600W and 20 minutes respectively. The results showed that activated carbon produced from single and mixed biomass at 40% concentration of KOH exhibited higher adsorption capacity for iodine number and percentage removal of MB with comparison to 30% and 50% of KOH concentrations. The highest BET surface area of 441.19 m2/g was obtained by CSAc-40. Further both CSAc-40 and PKSAc-40 produced an average pore size diameter of less than 2.0 nm which is in the range of micropore region. On contrary, the mixed CSPKSAc-40 produced an average pore size diameter of 6.0 nm which is in the region of mesopore. All the CSAc-40, PKSAc-40 and mixed CSPKSAc-40 showed similar adsorption trend for iodine number and percentage removal of MB. Interestingly, this finding showed that in the mixed activated carbon some chemical reactions might have occurred during the activation process producing mesoporous instead of microporous as obtained by the single biomass activated carbon.

scholarly journals Processing and Characterization of Activated Carbon from Coconut Shell and Palm Kernel Shell Waste by H3PO4 Activation

2021 ◽  
Vol 61 (2) ◽  
pp. 91-104
Author(s):  
A. Nyamful ◽  
E. K. Nyogbe ◽  
L. Mohammed ◽  
M. N. Zainudeen ◽  
S. A. Darkwa ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Scale Up ◽  
Palm Kernel ◽  
Coconut Shell ◽  
Palm Kernel Shell ◽  
Time Scanning ◽  
Shell Waste ◽  
H3po4 Activation ◽  
Characterization Of Activated Carbon

Palm kernel shell and coconut shell are used as a precursor for the production of activated carbon, a way of mitigating the tons of waste produced in Ghana. The raw Palm kernel shell and coconut shell were activated chemically using H3PO4. A maximum activated carbon yield of 26.3 g was obtained for Palm kernel shell and 22.9 g for coconut shell at 400oC, an impregnation ratio of 1.2 and 1-hour carbonization time. Scanning electron microscopy reveals well-developed cavities of the H3PO4 activated coconut shell and Palm kernel shell compared to the non-activated carbon. Iodine number of 743.02 mg/g and 682.11 mg/g, a porosity of 0.31 and 0.49 and the electrical conductivity of 2010 μS/cm and 778 μS /cm were obtained for the AC prepared from the coconut shell and Palm kernel shell respectively. The results of this work show that high-quality activated carbon can be manufactured locally from coconut shell and Palm kernel shell waste, and a scale-up of this production will go a long way to reduce the tons of coconut shell and Palm kernel shell waste generated in the country.

Sign in / Sign up

Export Citation Format

Share Document