Innovative Magnetic-Field Assisted Finishing (MAF) Using Nano-Scale Solid Lubricant: A Case Study on Mold Steel

Author(s):  
Bibek Poudel ◽  
Pil-ho Lee ◽  
Guangchao Song ◽  
Hoa Nguyen ◽  
Kayoung Kim ◽  
...  
Author(s):  
Pil-Ho Lee ◽  
Haseung Chung ◽  
Patrick Steven McCormick ◽  
Patrick Kwon ◽  
Hoa Nguyen ◽  
...  

Magnetic field-assisted finishing (MAF) is a surface quality enhancing process that utilizes a flexible brush composed of ferrous metal and abrasive particles. This paper experimentally and statistically investigates the characteristics of a MAF process with nano-scale solid lubricant. A new MAF tool was developed by integrating iron and abrasive particles, and nano-scale solid lubricant. In this experiment, the optical microscopic images of the surface are obtained to measure the surface roughness resulting from MAF processes with varying the content of abrasive particles and the presence of nano-scale solid lubricant. Furthermore, spatial statistics techniques are used to quantitatively evaluate the quality of the surface resulting from each combination of MAF parameters. It is demonstrated that the size and type of abrasive particles mainly affect MAF process and the newly developed MAF tool with nano-scale solid lubricant can improve the final surface quality.


Author(s):  
Hung-Sung Lin ◽  
Ying-Chin Hou ◽  
Juimei Fu ◽  
Mong-Sheng Wu ◽  
Vincent Huang ◽  
...  

Abstract The difficulties in identifying the precise defect location and real leakage path is increasing as the integrated circuit design and process have become more and more complicated in nano scale technology node. Most of the defects causing chip leakage are detectable with only one of the FA (Failure Analysis) tools such as LCD (Liquid Crystal Detection) or PEM (Photon Emission Microscope). However, due to marginality of process-design interaction some defects are often not detectable with only one FA tool [1][2]. This paper present an example of an abnormal power consumption process-design interaction related defect which could only be detected with more advanced FA tools.


Author(s):  
Olivier Crépel ◽  
Philippe Descamps ◽  
Patrick Poirier ◽  
Romain Desplats ◽  
Philippe Perdu ◽  
...  

Abstract Magnetic field based techniques have shown great capabilities for investigation of current flows in integrated circuits (ICs). After reviewing the performances of SQUID, GMR (hard disk head technologies) and MTJ existing sensors, we will present results obtained on various case studies. This comparison will show the benefit of each approach according to each case study (packaged devices, flip-chip circuits, …). Finally we will discuss on the obtained results to classify current techniques, optimal domain of applications and advantages.


ChemCatChem ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 4080-4086
Author(s):  
Ji‐Won Song ◽  
Yoonjin Baeg ◽  
Ha‐Yeon Jeong ◽  
Jinwon Lee ◽  
Deok‐Kun Oh ◽  
...  

2018 ◽  
Vol 145 ◽  
pp. 03004
Author(s):  
Polya Dobreva ◽  
Olga Nitcheva ◽  
Monio Kartalev

This paper presents a case study of the plasma parameters in the magnetosheath, based on THEMIS measurements. As a theoretical tool we apply the self-consistent magnetosheath-magnetosphere model. A specific aspect of the model is that the positions of the bow shock and the magnetopause are self-consistently determined. In the magnetosheath the distribution of the velocity, density and temperature is calculated, based on the gas-dynamic theory. The magnetosphere module allows for the calculation of the magnetopause currents, confining the magnetic field into an arbitrary non-axisymmetric magnetopause. The variant of the Tsyganenko magnetic field model is applied as an internal magnetic field model. As solar wind monitor we use measurements from the WIND spacecraft. The results show that the model quite well reproduces the values of the ion density and velocity in the magnetosheath. The simlicity of the model allows calulations to be perforemed on a personal computer, which is one of the mean advantages of our model.


2007 ◽  
Vol 25 (3) ◽  
pp. 785-799 ◽  
Author(s):  
A. Kis ◽  
M. Scholer ◽  
B. Klecker ◽  
H. Kucharek ◽  
E. A. Lucek ◽  
...  

Abstract. Field-aligned beams are known to originate from the quasi-perpendicular side of the Earth's bow shock, while the diffuse ion population consists of accelerated ions at the quasi-parallel side of the bow shock. The two distinct ion populations show typical characteristics in their velocity space distributions. By using particle and magnetic field measurements from one Cluster spacecraft we present a case study when the two ion populations are observed simultaneously in the foreshock region during a high Mach number, high solar wind velocity event. We present the spatial-temporal evolution of the field-aligned beam ion distribution in front of the Earth's bow shock, focusing on the processes in the deep foreshock region, i.e. on the quasi-parallel side. Our analysis demonstrates that the scattering of field-aligned beam (FAB) ions combined with convection by the solar wind results in the presence of lower-energy, toroidal gyrating ions at positions deeper in the foreshock region which are magnetically connected to the quasi-parallel bow shock. The gyrating ions are superposed onto a higher energy diffuse ion population. It is suggested that the toroidal gyrating ion population observed deep in the foreshock region has its origins in the FAB and that its characteristics are correlated with its distance from the FAB, but is independent on distance to the bow shock along the magnetic field.


2020 ◽  
Vol 500 ◽  
pp. 166296
Author(s):  
Ibrahim Cinar ◽  
Daniel Lacour ◽  
Francois Montaigne ◽  
Vito Puliafito ◽  
Sebastien Petit Watelot ◽  
...  

2018 ◽  
Author(s):  
Xinhua Wei ◽  
Chunlin Cai ◽  
Henri Rème ◽  
Iannis Dandouras ◽  
George Parks

Abstract. In this paper, we analyzed the y-component of magnetic field line curvature in the plasma sheet and found that there are two kinds of shear structures of the flapping current sheet, i.e. symmetric and antisymmetric. The alternating bending orientations of guiding field are exactly corresponding to alternating north-south asymmetries of the bouncing ion population in the sheet center. Those alternating asymmetric plasma sources consequently induce the current sheet flapping motion as a driver. In addition, a substantial particle population with dawnward motion was observed in the center of a bifurcated current sheet. This population is identified as the quasi-adiabatic particles, and provides a net current opposite to the conventional cross-tail current.


Sign in / Sign up

Export Citation Format

Share Document