scholarly journals Predicting the behavior of reinforced concrete columns confined by fiber reinforced polymers using data mining techniques

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Sahar Y. Ghanem ◽  
Heba Elgazzar
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
Compressive Stress ◽  
Compressive Strain ◽  
Concrete Columns ◽  
Steel Reinforcement ◽  
Fiber Reinforced Polymers ◽  
Stress And Strain ◽  
Fiber Reinforced ◽  
The Impact

AbstractFiber Reinforced Polymer (FRP) usage to wrap reinforced concrete (RC) structures has become a popular technology. Most studies about RC columns wrapped with FRP in literature ignored the internal steel reinforcement. This paper aims to develop a model for the axial compressive strength and axial strain for FRP confined concrete columns with internal steel reinforcement. The impact of FRP, Transverse, and longitudinal reinforcement is studied. Two non-destructive analysis methods are explored: Artificial Neural Networks (ANNs) and Regression Analysis (RA). The database used in the analysis contains the experimental results of sixty-four concrete columns under the compressive concentric load available in the literature. The results show that both models can predict the column's compressive stress and strain reasonably with low error and high accuracy. FRP has the highest effect on the confined compressive stress and strain compared to other materials. While the longitudinal steel actively contributes to the compressive strength, and the transverse steel actively contributes to the compressive strain.

Effect of combined drink cans and steel fibers on the impact resistance and mechanical properties of concrete

2020 ◽  
Vol 14 (2) ◽  
pp. 6734-6742
Author(s):  
A. Syamsir ◽  
S. M. Mubin ◽  
N. M. Nor ◽  
V. Anggraini ◽  
S. Nagappan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Impact Resistance ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Indirect Tensile ◽  
The Impact

This study investigated the combine effect of 0.2 % drink cans and steel fibers with volume fractions of 0%, 0.5%, 1%, 1.5%, 2%, 2.5% and 3% to the mechanical properties and impact resistance of concrete. Hooked-end steel fiber with 30 mm and 0.75 mm length and diameter, respectively was selected for this study.  The drinks cans fiber were twisted manually in order to increase friction between fiber and concrete. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the strength performance of concrete, especially the compressive strength, flexural strength and indirect tensile strength. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the compressive strength, flexural strength and indirect tensile strength by 2.3, 7, and 2 times as compare to batch 1, respectively. Moreover, the impact resistance of fiber reinforced concrete has increase by 7 times as compared to non-fiber concretes. Moreover, the impact resistance of fiber reinforced concrete consistently gave better results as compared to non-fiber concretes. The fiber reinforced concrete turned more ductile as the dosage of fibers was increased and ductility started to decrease slightly after optimum fiber dosage was reached. It was found that concrete with combination of 2% steel and 0.2% drink cans fibers showed the highest compressive, split tensile, flexural as well as impact strength.    

Behaviour of Uniaxial Reinforced Concrete Columns Strengthened with Ultra-High Performance Concrete and Fiber Reinforced Polymers

2021 ◽  
Vol 28 (2) ◽  
pp. 54-72
Author(s):  
Abd-al-Salam Al-Hazragi ◽  
Assim Lateef
Keyword(s):  
Reinforced Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
Concrete Columns ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced Polymers ◽  
Tension Zone ◽  
Fiber Reinforced ◽  
Group A ◽  
Group B

This article investigates the behaviour of strengthened concrete columns using jacketing ultra-high-performance fiber reinforced concrete (UHPFRC) and carbon fiber-reinforced polymer (CFRP) under uniaxial loaded. The jacket was connected to the column core using shear connectors and (CFRP) fixed as a strip on the tension zone between the column cores and the jacketing. Seven column samples of square cross-section (120 x120) mm at the midsection with overall length of 1250 mm were cast using normal strength concrete (NSC) and having similar longitudinal and transverse reinforcement. The samples were made and tested under axial load at eccentricity equal to 120 mm up to failure. Test parameters were the thickness of jackets (25 and 35) mm and the width of CFRP (0,8, and 12) cm. Column specimens were tested, one of them was reference without any strengthening, and the other specimens divided into two groups (A, and B), and each group included three specimens based on the parameters. Group (A) has UHPFRC jacket thickness 25 mm and CFRP width (0,8, and 12) cm respectively, and group (B) has UHPFRC jacket thickness 35 mm and CFRP width (0,8, and 12) cm respectively. The outcomes of the article show that increasing the thickness of jacket, and width of CFRP lead to increase in the load carrying capacity about (110.5%,168.4%, and 184.2%) for group A, and (157.9%,226.3%, and 263.2%) for group B compared with the reference column due to delay in the appearance of cracks and their distribution. The mid-height lateral displacement of columns was decreased about (66.6%,42.3%, and 35.9%) for group A, and (46.15%,38.46%, and 32.3%) for group B, also the axial deformation of specimens decreased about (71.7%,60.86%, and 55.86%) for group A, and (65.5%,60.5%, and 53.4) for group B compared with the reference column. The ductility of columns that were strengthened with UHPFRC jacket only was increased about (13.67%,19.66%) for thickness(25,35) mm respectively, because of that UHPFRC jacket was contented on steel fibers, and the percentage decrease of ductility was about (5.1%,and 12%) for group (A), (1%,and 9.4%) for group (B) when bonded CFRP in the tension zone with width (8 ,and 12) cm respectively. The results show improvement in the initial and secant stiffness when, increased the thickness of jacket, and width of CFRP because of increase in the size of columns and improvement in the modulus of elasticity. The toughness increase was about (273.97%,301.55%, and 304.5%) for group A, and (453.69%,511.93%, and 524.28%) for group B compared with the reference column because of increase in the size of specimens and delay the appearance of cracks.

Investigation of the behavior of circular concrete columns reinforced with carbon fiber reinforced polymer (CFRP) jackets

1999 ◽  
Vol 26 (5) ◽  
pp. 590-596 ◽  
Author(s):  
Burt K Purba ◽  
Aftab A Mufti
Keyword(s):  
Reinforced Concrete ◽  
Carbon Fiber ◽  
Concrete Columns ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced Polymers ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Reinforced Concrete Columns ◽  
Reinforced Polymer ◽  
Carbon Fiber Reinforced

Recent advancements in the fields of fiber reinforced polymers (FRPs) have resulted in the development of new materials with great potential for applications in civil engineering structures, and due to extensive research over recent years, FRPs are now being considered for the design of new structures. This study describes how carbon fiber reinforced polymer jackets can be used to reinforce circular concrete columns. Fibers aligned in the circumferential direction provide axial and shear strength to the concrete, while fibers aligned in the longitudinal direction provide flexural reinforcement. Prefabricated FRP jackets or tubes would also provide the formwork for the columns, resulting in a decrease in labor and materials required for construction. Also, the enhanced behavior of FRP jacketed concrete columns could allow the use of smaller sections than would be required for conventionally reinforced concrete columns. Furthermore, FRP jacket reinforced concrete columns would be more durable than conventionally reinforced concrete columns and therefore would require less maintenance and have longer service life.Key words: bridge, carbon, column, concrete, confinement, fiber reinforced polymer, jacket, retrofitting, seismic, strengthening.

scholarly journals Prediction of Ultimate Strain for Rectangular Reinforced Concrete Columns Confined with Fiber Reinforced Polymers under Cyclic Axial Compression

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2691
Author(s):  
Theodora D. Fanaradelli ◽  
Theodoros C. Rousakis
Keyword(s):  
Reinforced Concrete ◽  
Strain Field ◽  
Tensile Strain ◽  
Axial Strain ◽  
Concrete Columns ◽  
Fiber Reinforced Polymers ◽  
Design Parameters ◽  
Field Variation ◽  
Fiber Reinforced ◽  
Reinforced Concrete Columns

This paper investigates the crucial design parameters for the prediction of the ultimate axial compressive deformation of reinforced concrete columns externally confined with fiber reinforced polymer (FRP) materials. Numerous test results of available columns with a square and rectangular section under cyclic axial loading were gathered in an advanced database. Herein, the database is enriched with necessary design parameters in order to address the unique tensile strain field variation of the FRP jacket. Since there is a lack of consequent recording of the FRP strain field in existing experiments, three dimensional pseudodynamic finite element analyses results from several characteristic cases of tested columns are utilized to address this gap. Therefore, a hybrid experimental–analytical database is formed, including several critical FRP strains, steel strains and deformations. A modified model is proposed to predict the ultimate axial strain for reinforced concrete columns externally confined with FRP materials. The proposed model aims to address indirectly the effects of the internal steel cage, concrete section shape and of their interaction with the external FRP jacket on the critical tensile strain of the FRP jacket at failure of the column. The predictive performance of the model over the available tests of (reinforced concrete) RC columns under cyclic compression is remarkably improved when compared against the performance of other existing models. It provides predictions with average ratio (AR) of 0.96 and average absolute error (AAE) of 36.5% and therefore may contribute to safer seismic resistant redesign.

scholarly journals PARAMETRIC EVALUATION OF THE PLASTIC DEFORMATION CAPACITY OF FIBER REINFORCED POLYMERS CONFINED SQUARE AND RECTANGULAR COLUMNS

2019 ◽  
Vol 13 (3) ◽  
pp. 59-63
Author(s):  
E. TORE ◽  
A. YAVAS
Keyword(s):  
Plastic Deformation ◽  
Reinforced Concrete ◽  
Concrete Strength ◽  
Concrete Columns ◽  
Fiber Reinforced Polymers ◽  
Deformation Capacity ◽  
Fiber Reinforced ◽  
Design Guideline ◽  
Reinforced Concrete Columns ◽  
Reinforced Polymers

Confinement with fiber reinforced polymers of reinforced concrete columns is promising retrofit solution for improving ductility of existing structure. In the study, plastic deformation capacityof fiber reinforced polymers confined square and rectangular reinforced concrete columns were parametrically evaluated. Recently released seismic strengthening recommendations of American Concrete Institute were considered for calculating plastic rotation of specified columns. Fiber reinforced polymers confined concrete model provided by the design guideline was utilized for calculating moment curvature relationship of fiber reinforced polymers confined reinforced concrete columns. Numerous sectional analysis was performed with combination of various parameters (concrete strength, axial load ratio and number of fiber reinforced polymers plies). Plastic rotations of columns were determined with plastic part of the curvature and plastic hinge length for evaluating the effects of parameters on plastic deformation capacity.

Sign in / Sign up

Export Citation Format

Share Document