Mineral trioxide aggregate bone cement based on wet-prepared calcium silicate

2020 ◽  
Vol 57 (1) ◽  
pp. 40-55
Author(s):  
Myung Chul Chang
Keyword(s):  
Bone Cement ◽  
Calcium Silicate ◽  
Mineral Trioxide Aggregate

scholarly journals Does Delayed Restoration Improve Shear Bond Strength of Different Restorative Protocols to Calcium Silicate-Based Cements?

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2216 ◽  
Author(s):  
Paulo Palma ◽  
Joana Marques ◽  
Rui Falacho ◽  
Alexandra Vinagre ◽  
João Santos ◽  
...  
Keyword(s):  
Bond Strength ◽  
Calcium Silicate ◽  
Shear Bond Strength ◽  
Proper Time ◽  
Testing Machine ◽  
Glass Ionomer Cement ◽  
Mineral Trioxide Aggregate ◽  
Bonding System ◽  
Post Hoc ◽  
Ionomer Cement

The purpose of the present study was to assess the proper time to perform a restoration (immediately or delayed) after placement of two calcium silicate-based cements (CSCs) and to test the performance of two different restorative protocols regarding shear bond strength (SBS). Seventy-five acrylic blocks were randomly divided into five groups (n = 15). Specimens were filled with either ProRoot MTA (Dentsply Tulsa Dental) or Biodentine (Septodont). The restoration was performed at an immediate (12 min) or delayed (seven days) timeframe, using a resin-based flowable composite (SDR) (bonded to the CSC using a universal bonding system) or glass ionomer cement (GIC) as restorative materials. SBS was measured using a universal testing machine. Fractured surfaces were evaluated, and the pattern was registered. Statistical analysis was performed using the Dunn–Sidak post hoc test (P < 0.05). Biodentine/immediate SDR showed the highest mean SBS value (4.44 MPa), with statistically significant differences when compared to mineral trioxide aggregate (MTA)/GIC (1.14 MPa) and MTA/immediate SDR (1.33 MPa). MTA/GIC and MTA/immediate SDR did not present significant differences regarding SBS. No statistical differences were verified concerning mean SBS between both CSCs within the 7 day groups. MTA/delayed SDR (3.86 MPa) presented statistical differences compared to MTA/immediate SDR, whereas no differences were observed regarding Biodentine performance (Biodentine/immediate SDR and Biodentine/delayed SDR (3.09 MPa)). Bonding procedures directly on top of MTA might be preferably performed at a delayed timeframe, whereas Biodentine might allow for immediate restoration.

scholarly journals Six-Month Color Stability Assessment of Two Calcium Silicate-Based Cements Used in Regenerative Endodontic Procedures

2019 ◽  
Vol 10 (1) ◽  
pp. 14 ◽  
Author(s):  
Paulo Palma ◽  
Joana Marques ◽  
Rui Falacho ◽  
Eder Correia ◽  
Alexandra Vinagre ◽  
...  
Keyword(s):  
Calcium Silicate ◽  
Saline Solution ◽  
Color Space ◽  
Mineral Trioxide Aggregate ◽  
Color Stability ◽  
Color Variation ◽  
Color Measurement ◽  
Suitable Alternative ◽  
Significance Level ◽  
Over Time

Aim: The purpose of the present study is to assess the color stability of two calcium silicate-based cements (CSCs) used in regenerative endodontic procedures (REPs). Methods: A total of 40 acrylic single-rooted transparent teeth, with immature apex, were used. Root canals were filled up to 3 mm below the level of the cementoenamel junction, with either saline solution (Mineral Trioxide Aggregate (MTA)/saline and Biodentine/saline) or blood (MTA/blood and Biodentine/blood). Subsequently, ProRoot MTA® or BiodentineTM was placed in the root canal to create a cervical barrier. Color measurement was carried out at four different evaluation periods (3 h, 72 h, 7 days, and 6 months). Shade analysis within the L* a* b* color space was performed and color variation (∆E) calculated. The significance level for statistical analysis was set at p < 0.05. Results: The four groups showed a significant decrease in L* values over time. The ΔE value increased over time for all groups but was not statistically significant for the Biodentine/blood group. Two-way ANOVA showed no interaction between the CSC and treatment (contact with saline solution or blood). CSC used was the factor responsible for ΔE over time, inducing statistically significant color variations from T3H to T7D (p = 0.04) and T3H to T6M (p < 0.01). After 6 months, MTA/saline had 5.08 (p = 0.001) higher ΔE than Biodentine/Saline and the MTA/blood had 3.65 (p = 0.009) higher than Biodentine/blood. Conclusions: After 6 months, regardless of blood exposure, Biodentine exhibits superior color stability compared to MTA. Biodentine might be a suitable alternative to MTA as a cervical barrier material in REPs.

scholarly journals Fracture resistance of simulated immature teeth after apexification with calcium silicate-based materials

2016 ◽  
Vol 10 (02) ◽  
pp. 188-192 ◽  
Author(s):  
Evren Ok ◽  
Mustafa Altunsoy ◽  
Mehmet Tanriver ◽  
Ismail Davut Capar ◽  
Abdussamed Kalkan ◽  
...  
Keyword(s):  
Analysis Of Variance ◽  
Calcium Silicate ◽  
Fracture Resistance ◽  
Composite Resin ◽  
Mineral Trioxide Aggregate ◽  
Control Group ◽  
Fiber Post ◽  
Immature Teeth ◽  
Post Hoc

ABSTRACT Objective: To compare the fracture resistance of simulated immature teeth filled with an apical barrier of mineral trioxide aggregate (MTA), Biodentine, and calcium-enriched mixture (CEM). Materials and Methods: Fifty-two single-rooted human maxillary central incisors were used. For standardization, the teeth were sectioned 6 mm above and 9 mm below the cementoenamel junction to simulate immature apex. Simulations of roots into immature apices were carried out using 1.5 mm diameter drills. The specimens were then randomly divided into three experimental groups (n = 13) and one control group (n = 13). In experimental groups, MTA, Biodentine, and CEM were placed to apical 4 mm of the simulated immature roots. The samples were stored at 37°C and 100% humidity for 1 week. A load was applied on the crown of all teeth at 135° to their long axis until fracture. The data were analyzed using one-way analysis of variance and Tukey post-hoc tests. Results: No statistically significant differences were found among MTA, CEM, and Biodentine (P > 0.05), and these groups demonstrated higher fracture resistance than control group (P < 0.05). Conclusions: Using any of the MTA, Biodentine, and CEM as an apical plug and restoring with fiber post and composite resin increases the fracture resistance of immature teeth.

scholarly journals Reparative Mineralized Tissue Characterization after Direct Pulp Capping with Calcium-Silicate-Based Cements

Materials ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2102 ◽  
Author(s):  
Xuan Tran ◽  
Hamideh Salehi ◽  
Minh Truong ◽  
Minic Sandra ◽  
Jeremy Sadoine ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Calcium Silicate ◽  
Tissue Characterization ◽  
Mineral Trioxide Aggregate ◽  
Clinical Situation ◽  
Mineralized Tissue ◽  
Direct Pulp Capping ◽  
Pulp Capping ◽  
Inflammatory Status ◽  
Reparative Dentin

Nowadays, the preservation of dental pulp vitality is an integral part of our daily therapies. The success of these treatments depends on the clinical situation as well as the biomaterials used. Mineral Trioxide aggregate and BiodentineTM are commonly used as pulp capping materials. One objective of vital pulp therapy is the repair/regeneration of the pulp. In addition to the initial inflammatory status of the pulp, the nature and quality of the new mineralized tissue obtained after pulp capping directly influence the success of the treatment. In order to characterize the reparative dentin, in the current study, the chemical composition and microstructure of the dentin bridge after direct pulp capping using Biodentine™ and mineral trioxide aggregate (MTA) was studied by using Raman microspectroscopy and scanning electron microscopy, respectively. The results showed that the reparative dentin bridge observed in both groups presented dentin tubules and chemical composition similar to primary dentin. With the limitations of this study, the calcium-silicate-based cements used as pulp capping materials provide an optimal environment for pulp healing, resulting in a reparative dentin resembling on certain points of the primary dentin and the regeneration of the pulp.

scholarly journals Tooth Discoloration after Regenerative Endodontic Procedures with Calcium Silicate-Based Cements—An Ex Vivo Study

2020 ◽  
Vol 10 (17) ◽  
pp. 5793
Author(s):  
Paulo J. Palma ◽  
Joana A. Marques ◽  
Joana Santos ◽  
Rui I. Falacho ◽  
Diana Sequeira ◽  
...  
Keyword(s):  
Calcium Silicate ◽  
Color Change ◽  
Ex Vivo ◽  
Mineral Trioxide Aggregate ◽  
Critical Factor ◽  
Color Variation ◽  
Significance Level ◽  
Tooth Discoloration ◽  
Biomaterial Application ◽  
Ex Vivo Study

The aim of the present ex vivo study was to assess and compare coronal discoloration induced by four endodontic biomaterials used in regenerative endodontic procedures (REPs). Root resection was executed horizontally, 2 mm apical to the cementoenamel junction, in all fifty-four teeth. After accessing the pulp chamber, specimens were randomly divided in groups and filled with either saline solution or blood, followed by calcium silicate-based cements (CSCs) placement: ProRoot mineral trioxide aggregate (MTA) (Dentsply Sirona), Biodentine (Septodont), TotalFill BC (FKG), or pulp capping material (PCM) (Coltène). Color change (ΔE) was assessed using the L* a* b* system at five different timepoints (before and immediately after biomaterial application, 72 h, 7 days, and 6 months). The significance level for statistical analysis was set at p < 0.05. There are statistically significant differences regarding ΔE over time (p < 0.001). Statistical differences are found considering material (p < 0.001), treatment (p = 0.007), or both (p = 0.002). If solely the material or treatment is considered, regardless of time, statistically significant differences are detected (p < 0.001). After a six-month period of evaluation, blood exposure might be a critical factor in biomaterials’ color variation. Biodentine presents the lowest discoloration potential, followed by TotalFill and PCM, albeit without statistically significant differences. MTA exhibited the greatest color variation. The selection of biomaterial should consider the material’s discoloration potential.

scholarly journals Re-establishing apical patency after obturation with Gutta-percha and two novel calcium silicate-based sealers

2015 ◽  
Vol 09 (04) ◽  
pp. 457-461 ◽  
Author(s):  
Anastasia Agrafioti ◽  
Anastasios D. Koursoumis ◽  
Evangelos G. Kontakiotis
Keyword(s):  
Calcium Silicate ◽  
Continuous Wave ◽  
Mineral Trioxide Aggregate ◽  
Optical Microscope ◽  
Gutta Percha ◽  
Anterior Teeth ◽  
Working Length ◽  
Significant Difference ◽  
Ah Plus ◽  
Time Required

ABSTRACT Objective: Aim of the present study was to evaluate the retreatability and reestablishment of apical patency of two calcium silicate-based sealers, TotalFill BC Sealer (BCS) and mineral trioxide aggregate Fillapex (MTA F), versus AH Plus, when used in combination with Gutta-percha (GP). Materials and Methods: The canals of 54 single-rooted anterior teeth were instrumented and filled with GP/AH Plus (Group A), GP/MTA F (Group B), or GP/BCS (Group C) using continuous wave obturation technique. The groups were subdivided into subgroups with the master-GP cone placed to the working length (WL) or intentionally 2 mm short. The retreatment procedures were performed using ultrasonics, chloroform, rotary, and hand files. The ability to establish the patency and reach WL was determined as well as the time taken to reach WL was calculated in minutes. Furthermore, the samples were observed under a dental, optical microscope, after vertically splitting them. Results: The WL and patency were reestablished in 100% of specimens in all groups. The Mann–Whitney U-test indicated that there was a significant difference in the amount of time required to reach WL between the groups (P < 0.05) with group GP/BCS short of the WL showing the most amount of time to be retreated. Conclusion: The novel calcium silicate-based sealers are negotiable under simple root canal anatomy. However, the conventional retreatment techniques are not able to fully remove them.

Sign in / Sign up

Export Citation Format

Share Document