Physical nature of the dielectric constant ε of H2O III. Quantitative verification

1994 ◽  
Vol 211 (4) ◽  
pp. 431-435 ◽  
Author(s):  
A. Stankov

Relevance: Problems of control and determination of electrophysical parameters of materials of different physical nature are relevant in terms of the development of express methods of analysis of substances in various fields of science and technology, in particular, in biotechnology and biomedicine. Also, the relevance of the work is grounded by the search and implementation of new non-invasive medical diagnostic methods. The purpose of the work is to experimentally test the method of calculating the dielectric constant of multilayer structures based on conformal transformation, to test the method of electromagnetic probing of objects with one-side access using a microstrip resonator. Materials and methods: The paper presents a method for calculating the effective dielectric constant of a three-layer structure using a microstrip resonator of a new shape. A number of solid and liquid materials were investigated experimentally. It is shown that the resonant frequency and quality factor of the resonator loaded with the investigated material allow to estimate the concentration of the components of binary solutions. The possibility of using a microstrip resonator as a plethysmographic sensor has been investigated. Results: An electromagnetic sensor for measuring the dielectric constant of objects with one-side access was developed. The description of the original design of the microstrip resonator is presented and its modeling and experimental research are carried out. The results of measurements of the dielectric constant of objects of different physical nature are obtained: solid dielectrics and biological liquids. The influence of relative glucose concentration on the resonant properties of the sensor was studied. The possibility of using the sensor as a plethysmographic sensor in biomedical systems is shown. Conclusion: Theoretical and experimental studies of a microstrip resonator of complex geometric shape, which are presented in the paper, confirmed the possibility of its use as a sensor of electrophysical parameters of materials with different dielectric constant and conductivity. A new method of blood flow registration is proposed, based on the fixation of changes in the effective dielectric constant of tissues containing blood vessels.


1997 ◽  
Vol 161 ◽  
pp. 299-311 ◽  
Author(s):  
Jean Marie Mariotti ◽  
Alain Léger ◽  
Bertrand Mennesson ◽  
Marc Ollivier

AbstractIndirect methods of detection of exo-planets (by radial velocity, astrometry, occultations,...) have revealed recently the first cases of exo-planets, and will in the near future expand our knowledge of these systems. They will provide statistical informations on the dynamical parameters: semi-major axis, eccentricities, inclinations,... But the physical nature of these planets will remain mostly unknown. Only for the larger ones (exo-Jupiters), an estimate of the mass will be accessible. To characterize in more details Earth-like exo-planets, direct detection (i.e., direct observation of photons from the planet) is required. This is a much more challenging observational program. The exo-planets are extremely faint with respect to their star: the contrast ratio is about 10−10at visible wavelengths. Also the angular size of the apparent orbit is small, typically 0.1 second of arc. While the first point calls for observations in the infrared (where the contrast goes up to 10−7) and with a coronograph, the latter implies using an interferometer. Several space projects combining these techniques have been recently proposed. They aim at surveying a few hundreds of nearby single solar-like stars in search for Earth-like planets, and at performing a low resolution spectroscopic analysis of their infrared emission in order to reveal the presence in the atmosphere of the planet of CO H2O and O3. The latter is a good tracer of the presence of oxygen which could be, like on our Earth, released by biological activity. Although extremely ambitious, these projects could be realized using space technology either already available or in development for others missions. They could be built and launched during the first decades on the next century.


1988 ◽  
Vol 102 ◽  
pp. 329
Author(s):  
R.W.P. McWhirter

The intensity of a specrtal line from an optically thin plasma such as the outer atmosphere of the sun depends on both the atomic properties of the atomic ion responsible for the line and the physical nature of the plasma. In this paper we discuss the various ways in which the measured spectral intensities from the sun are used to discover something about the nature of the sun’s atmosphere. The technique has been referred to as the emission measure method. It has important limitations in terms of the accuracy of the specrtal data as well as the atomic data. We discuss some of these and suggest methods by which they may be assessed. The technique is illustrated by application to real observations from a number of authors.


Author(s):  
E. L. Hall ◽  
A. Mogro-Campero ◽  
N. Lewis ◽  
L. G. Turner

There have been a large number of recent studies of the growth of Y-Ba-Cu-O thin films, and these studies have employed a variety of substrates and growth techniques. To date, the highest values of Tc and Jc have been found for films grown by sputtering or coevaporation on single-crystal SrTiO3 substrates, which produces a uniaxially-aligned film with the YBa2Cu3Ox c-axis normal to the film plane. Multilayer growth of films on the same substrate produces a triaxially-aligned film (regions of the film have their c-axis parallel to each of the three substrate <100> directions) with lower values of Jc. Growth of films on a variety of other polycrystalline or amorphous substrates produces randomly-oriented polycrystalline films with low Jc. Although single-crystal SrTiO3 thus produces the best results, this substrate material has a number of undesireable characteristics relative to electronic applications, including very high dielectric constant and a high loss tangent at microwave frequencies. Recently, Simon et al. have shown that LaAlO3 could be used as a substrate for YBaCuO film growth. This substrate is essentially a cubic perovskite with a lattice parameter of 0.3792nm (it has a slight rhombohedral distortion at room temperature) and this material exhibits much lower dielectric constant and microwave loss tangents than SrTiO3. It is also interesting from a film growth standpoint since it has a slightly smaller lattice parameter than YBa2Cu3Ox (a=0.382nm, b=c/3=0.389nm), while SrTiO3 is slightly larger (a=0.3905nm).


2020 ◽  
Vol 8 (32) ◽  
pp. 16661-16668
Author(s):  
Huayao Tu ◽  
Shouzhi Wang ◽  
Hehe Jiang ◽  
Zhenyan Liang ◽  
Dong Shi ◽  
...  

The carbon fiber/metal oxide/metal oxynitride layer sandwich structure is constructed in the electrode to form a mini-plate capacitor. High dielectric constant metal oxides act as dielectric to increase their capacitance.


Author(s):  
Peng Wang ◽  
Zhongbin Pan ◽  
Weilin Wang ◽  
Jianxu Hu ◽  
Jinjun Liu ◽  
...  

High-performance electrostatic capacitors are in urgent demand owing to the rapidly development of advanced power electronic applications. However, polymer-based composite films with both high breakdown strength (Eb) and dielectric constant...


Sign in / Sign up

Export Citation Format

Share Document