scholarly journals The m4 3D printer: A multi-material multi-method additive manufacturing platform for future 3D printed structures

2019 ◽  
Vol 29 ◽  
pp. 100819 ◽  
Author(s):  
Devin J. Roach ◽  
Craig M. Hamel ◽  
Conner K. Dunn ◽  
Marshall V. Johnson ◽  
Xiao Kuang ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printer ◽  
3D Printed ◽  
Manufacturing Platform

History of Additive Manufacturing

2017 ◽  
pp. 1-24 ◽  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Large Scale ◽  
Selective Laser Sintering ◽  
3D Printer ◽  
3D Objects ◽  
History Of ◽  
Pros And Cons ◽  
3D Printed ◽  
The Common

History of additive manufacturing started in the 1980s in Japan. Stereolithography was invented first in 1983. After that tens of other techniques were invented under the common name 3D printing. When stereolithography was invented rapid prototyping did not exists. Tree years later new technique was invented: selective laser sintering (SLS). First commercial SLS was in 1990. At the end of 20t century, first bio-printer was developed. Using bio materials, first kidney was 3D printed. Ten years later, first 3D Printer in the kit was launched to the market. Today we have large scale printers that printed large 3D objects such are cars. 3D printing will be used for printing everything everywhere. List of pros and cons questions rising every day.

scholarly journals Property Analysis of Photo-Polymerization-Type 3D-Printed Structures Based on Multi-Composite Materials

2021 ◽  
Vol 11 (18) ◽  
pp. 8545
Author(s):  
So-Ree Hwang ◽  
Min-Soo Park
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Composite Materials ◽  
3D Printing ◽  
Bending Test ◽  
3D Printer ◽  
Complex Structures ◽  
Photo Polymerization ◽  
Anisotropic Structures ◽  
3D Printed

Additive manufacturing, commonly called 3D printing, has been studied extensively because it can be used to fabricate complex structures; however, polymer-based 3D printing has limitations in terms of implementing certain functionalities, so it is limited in the production of conceptual prototypes. As such, polymer-based composites and multi-material 3D printing are being studied as alternatives. In this study, a DLP 3D printer capable of printing multiple composite materials was fabricated using a movable separator and structures with various properties were fabricated by selectively printing two composite materials. After the specimen was fabricated based on the ASTM, the basic mechanical properties of the structure were compared through a 3-point bending test and a ball rebound test. Through this, it was shown that structures with various mechanical properties can be fabricated using the proposed movable-separator-based DLP process. In addition, it was shown that this process can be used to fabricate anisotropic structures, whose properties vary depending on the direction of the force applied to the structure. By fabricating multi-joint grippers with varying levels of flexibility, it was shown that the proposed process can be applied in the fabrication of soft robots as well.

Additive Manufacturing With Ceramics

2020 ◽  
Author(s):  
Kjetil Cline ◽  
Andrew LaFlam ◽  
Logan Smith ◽  
Margaret Nowicki ◽  
Nicholas Ku
Keyword(s):  
Additive Manufacturing ◽  
Body Armor ◽  
Print Quality ◽  
3D Printer ◽  
Current Design ◽  
3D Printed ◽  
To Receive ◽  
Boron Carbide B4c ◽  
Team Concept

Abstract The purpose of this project is to design a device that improves the performance of a ceramic additive manufacturing (AM) 3D printer constructed by Army Research Labs (ARL). ARL modified a standard LulzBot Taz 6 3D printer to print a ceramic slurry mixture of Boron Carbide (B4C) and Silicon Carbide (SiC) instead of plastic filament. Since these compounds are often used in body armor, ARL has been observing the effects on properties when these components are 3D printed. The current printer utilizes an auger in the print head to receive and mix the B4C and SiC slurries and extrude the combined slurry out of the print nozzle. The current design is limited in its ability to thoroughly mix the slurries during the printing process. Therefore, team Concept Creators has designed an improved auger that will increase the mixedness of the slurries, thus increasing the print quality of the composite specimen.

Using 3D Printers to Engage Students in Research

2019 ◽  
pp. 50-69
Author(s):  
Jim Flowers
Keyword(s):  
Additive Manufacturing ◽  
Research And Development ◽  
Educational Experiences ◽  
Physical And Mechanical Properties ◽  
Testing Equipment ◽  
3D Printer ◽  
3D Printers ◽  
3D Printed ◽  
Manufacturing Technologies ◽  
Student Inquiry

Is the primary purpose of a 3D printer to manufacture a product? Yes, but students and teachers can also use 3D printers to learn about and engage in research and experimentation. This could begin with product research and development, then expand to technical areas based on additive manufacturing technologies, the physical and mechanical properties of additive manufacturing materials, and the properties of 3D printed products. Student inquiry can take the form of formal or informal experimentation and observational studies. Although dedicated testing equipment can facilitate more demanding investigations, it is possible for quite a bit of experimentation to be done with little or no dedicated testing equipment. It is hoped that the reader will identify different educational experiences with experimentation that might fit their learners' needs and see 3D printers as tools for conducting and teaching about research, including product research and development and research into process engineering and materials.

AM-Serienproduktion für die Automobilindustrie/AM series production for the automotive industry

2020 ◽  
Vol 110 (11-12) ◽  
pp. 752-757
Author(s):  
Lukas Weiser ◽  
Marco Batschkowski ◽  
Niclas Eschner ◽  
Benjamin Häfner ◽  
Ingo Neubauer ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Automotive Industry ◽  
Series Production ◽  
Production Scale ◽  
Additive Fertigung ◽  
Small Series ◽  
Start Up ◽  
3D Printed ◽  
Component Quality

Die additive Fertigung schafft neue Gestaltungsfreiheiten. Im Rahmen des Prototypenbaus und der Kleinserienproduktion kann das Verfahren des selektiven Laserschmelzens genutzt werden. Die Verwendung in der Serienproduktion ist bisher aufgrund unzureichender Bauteilqualität, langen Anlaufzeiten sowie mangelnder Automatisierung nicht im wirtschaftlichen Rahmen möglich. Das Projekt „ReAddi“ möchte eine erste prototypische Serienfertigung entwickeln, mit der additiv gefertigte Bauteile für die Automobilindustrie wirtschaftlich produziert werden können. Additive manufacturing (AM) offers new freedom of design. The selective laser-powderbed fusion (L-PBF) process can be used for prototyping and small series production. So far, it has not been economical to use it on a production scale due to insufficient component quality, long start-up times and a lack of automation. The project ReAddi aims to develop a first prototype series production to cost-effectively manufacture 3D-printed components for the automotive industry.

scholarly journals Efficient 3D printing via photooxidation of ketocoumarin based photopolymerization

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Xiaoyu Zhao ◽  
Ye Zhao ◽  
Ming-De Li ◽  
Zhong’an Li ◽  
Haiyan Peng ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Visible Light ◽  
Light Exposure ◽  
Three Dimensional ◽  
3D Printer ◽  
Light Penetration ◽  
Viable Solution

AbstractPhotopolymerization-based three-dimensional (3D) printing can enable customized manufacturing that is difficult to achieve through other traditional means. Nevertheless, it remains challenging to achieve efficient 3D printing due to the compromise between print speed and resolution. Herein, we report an efficient 3D printing approach based on the photooxidation of ketocoumarin that functions as the photosensitizer during photopolymerization, which can simultaneously deliver high print speed (5.1 cm h−1) and high print resolution (23 μm) on a common 3D printer. Mechanistically, the initiating radical and deethylated ketocoumarin are both generated upon visible light exposure, with the former giving rise to rapid photopolymerization and high print speed while the latter ensuring high print resolution by confining the light penetration. By comparison, the printed feature is hard to identify when the ketocoumarin encounters photoreduction due to the increased lateral photopolymerization. The proposed approach here provides a viable solution towards efficient additive manufacturing by controlling the photoreaction of photosensitizers during photopolymerization.

Fused Filament Fabrication 3D Printed Polylactic Acid Electroosmotic Pumps

Lab on a Chip ◽  
2021 ◽  
Author(s):  
Liang Wu ◽  
Stephen Beirne ◽  
Joan-Marc Cabot Canyelles ◽  
Brett Paull ◽  
Gordon G. Wallace ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Polylactic Acid ◽  
Fused Filament Fabrication ◽  
Flexible Approach ◽  
Electroosmotic Pump ◽  
3D Printed ◽  
Electroosmotic Pumps

Additive manufacturing (3D printing) offers a flexible approach for the production of bespoke microfluidic structures such as the electroosmotic pump. Here a readily accessible fused filament fabrication (FFF) 3D printing...

scholarly journals 3D Printed Masks for Powders and Viruses Safety Protection Using Food Grade Polymers: Empirical Tests

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 617
Author(s):  
Ruben Foresti ◽  
Benedetta Ghezzi ◽  
Matteo Vettori ◽  
Lorenzo Bergonzi ◽  
Silvia Attolino ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
Material Selection ◽  
Mechanical Resistance ◽  
Biological Safety ◽  
Fused Deposition ◽  
Industrial Grade ◽  
Safety Protection ◽  
3D Printed ◽  
Manufacturing Technologies

The production of 3D printed safety protection devices (SPD) requires particular attention to the material selection and to the evaluation of mechanical resistance, biological safety and surface roughness related to the accumulation of bacteria and viruses. We explored the possibility to adopt additive manufacturing technologies for the production of respirator masks, responding to the sudden demand of SPDs caused by the emergency scenario of the pandemic spread of SARS-COV-2. In this study, we developed different prototypes of masks, exclusively applying basic additive manufacturing technologies like fused deposition modeling (FDM) and droplet-based precision extrusion deposition (db-PED) to common food packaging materials. We analyzed the resulting mechanical characteristics, biological safety (cell adhesion and viability), surface roughness and resistance to dissolution, before and after the cleaning and disinfection phases. We showed that masks 3D printed with home-grade printing equipment have similar performances compared to the industrial-grade ones, and furthermore we obtained a perfect face fit by customizing their shape. Finally, we developed novel approaches to the additive manufacturing post-processing phases essential to assure human safety in the production of 3D printed custom medical devices.

Sign in / Sign up

Export Citation Format

Share Document