Efficient transformation of corn stover to furfural using p-hydroxybenzenesulfonic acid-formaldehyde resin solid acid

AbstractThe application of light weight particleboard in furniture industry becomes more inevitable because of the requirement to facilitate transportation and assembly by the customer. Herein, a novel method for the fabrication of foaming particleboard was proposed, which is achieved by adding azodicarbonamide (AC) foaming agent into the formulation that consist of oven-dry poplar (Populus alba) particles (with the moisture content about 4%) and phenol formaldehyde resin (PF resin) (solid content of 48%). In this study, the effects of AC foaming agent and adhesive contents incorporation and its content on mechanical, physical and chemical properties of particleboards were investigated. The results showed that the addition of AC foaming agent played a critical role in properties of particleboard and the optimal particleboard performance was achieved at the particleboard density of 0.6 g/cm3, the PF resin amount of 12%, and the AC foaming agent amount of 1%. Furthermore, the pores appeared on the particle surface were the products of the radical pyrolysis of the foaming agent, which has been proved by the FTIR results and the pores also affect the properties of the particleboards.

Download Full-text

A Resorcinol-Formaldehyde Resin as an Embedding Material for Electron Microscopy of Membranes

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010006355x ◽

1969 ◽

Vol 27 ◽

pp. 328-329 ◽

Cited By ~ 1

Author(s):

J. G. Robertson ◽

D. F. Parsons

Keyword(s):

Electron Microscopy ◽

Osmium Tetroxide ◽

Neutral Lipids ◽

Lipid Extraction ◽

Water Soluble ◽

Formaldehyde Resin ◽

Electron Microscope Autoradiography ◽

Resorcinol Formaldehyde ◽

Major Disadvantage ◽

Cell Organization

The extraction of lipids from tissues during fixation and embedding for electron microscopy is widely recognized as a source of possible artifact, especially at the membrane level of cell organization. Lipid extraction is also a major disadvantage in electron microscope autoradiography of radioactive lipids, as in studies of the uptake of radioactive fatty acids by intestinal slices. Retention of lipids by fixation with osmium tetroxide is generally limited to glycolipids, phospholipids and highly unsaturated neutral lipids. Saturated neutral lipids and sterols tend to be easily extracted by organic dehydrating reagents prior to embedding. Retention of the more saturated lipids in embedded tissue might be achieved by developing new cross-linking reagents, by the use of highly water soluble embedding materials or by working at very low temperatures.

Download Full-text

Purification of water contaminated with heavy metals by example of lead as promising material based on graphene nanostructures

Perspektivnye Materialy ◽

10.30791/1028-978x-2020-9-34-43 ◽

2020 ◽

pp. 34-43

Author(s):

N. R. Memetov ◽

◽

A. V. Gerasimova ◽

A. E. Kucherova ◽

◽

...

Keyword(s):

Adsorption Process ◽

Phenol Formaldehyde ◽

Phenol Formaldehyde Resin ◽

Formaldehyde Resin ◽

Parameter Estimates ◽

Maximum Adsorption Capacity ◽

Ecological Situation ◽

Characteristic Parameters ◽

Purification Of Water ◽

Graphene Nanostructures

The paper evaluates the effectiveness of the use of graphene nanostructures in the purification of lead (II) ions to improve the ecological situation of water bodies. The mechanisms and characteristic parameters of the adsorption process were analyzed using empirical models of isotherms at temperatures of 298, 303, 313 and 323 K, which correspond to the following order (based on the correlation coefficient): Langmuir (0.99) > Temkin (0.97) > Dubinin – Radushkevich (0.90). The maximum adsorption capacity of the material corresponds to the range from 230 to 260 mg/g. We research the equilibrium at the level of thermodynamic parameter estimates, which indicates the spontaneity of the process, the endothermic nature and structure change of graphene modified with phenol-formaldehyde resin during the adsorption of lead (II) ions, leading to an increase in the disorder of the system.

Download Full-text