Gas permeability evolution mechanism during creep of a low permeable claystone

2016 ◽  
Vol 129 ◽  
pp. 47-53 ◽  
Author(s):  
Z.B. Liu ◽  
J.F. Shao ◽  
T.G. Liu ◽  
S.Y. Xie ◽  
N. Conil
Water ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1653
Author(s):  
Guofu Li ◽  
Yi Wang ◽  
Junhui Wang ◽  
Hongwei Zhang ◽  
Wenbin Shen ◽  
...  

Deep coalbed methane (CBM) is widely distributed in China and is mainly commercially exploited in the Qinshui basin. The in situ stress and moisture content are key factors affecting the permeability of CH4-containing coal samples. Therefore, considering the coupled effects of compressing and infiltrating on the gas permeability of coal could be more accurate to reveal the CH4 gas seepage characteristics in CBM reservoirs. In this study, coal samples sourced from Tunlan coalmine were employed to conduct the triaxial loading and gas seepage tests. Several findings were concluded: (1) In this triaxial test, the effect of confining stress on the permeability of gas-containing coal samples is greater than that of axial stress. (2) The permeability versus gas pressure curve of coal presents a ‘V’ shape evolution trend, in which the minimum gas permeability was obtained at a gas pressure of 1.1MPa. (3) The gas permeability of coal samples decreased exponentially with increasing moisture content. Specifically, as the moisture content increasing from 0.18% to 3.15%, the gas permeability decreased by about 70%. These results are expected to provide a foundation for the efficient exploitation of CBM in Qinshui basin.


2022 ◽  
Vol 29 (1) ◽  
pp. 12
Author(s):  
Yin Zeng ◽  
Lu Wang ◽  
Chaofu Deng ◽  
Qiangxing Zhang ◽  
Zhide Wu ◽  
...  

2021 ◽  
Author(s):  
Yuan-Jian LIN ◽  
Jiang-Feng LIU ◽  
Tao CHEN ◽  
Shi-Jia MA ◽  
Pei-Lin WANG ◽  
...  

Abstract In this paper, a THMC multi-field coupling triaxial cell was used to systematically study the evolution of gas permeability and the deformation characteristics of sandstone. The effects of confining pressure, axial pressure and air pressure on gas permeability characteristics were fully considered in the test. The gas permeability of sandstone decreases with increasing confining pressure. When the confining pressure is low, the variation of gas permeability is greater than the variation of gas permeability at high confining pressure. The gas injection pressure has a significant effect on the gas permeability evolution of sandstone. As the gas injection pressure increases, the gas permeability of sandstone tends to decrease. At the same confining pressure, the gas permeability of the sample during the unloading path is less than the gas permeability of the sample in the loading path. When axial pressure is applied, the axial stress has a significant influence on the permeability evolution of sandstone. When the axial pressure is less than 30 MPa, the gas permeability of the sandstone increases as the axial pressure increases. At axial pressures greater than 30 MPa, the permeability decreases as the axial pressure increases. Finally, the micro-pore/fracture structure of the sample after the gas permeability test was observed using 3D X-ray CT imaging.


2021 ◽  
Author(s):  
Kamal Nanda ◽  
Santanu Misra ◽  
Arghya Das

<p>Permeability evolution of low permeable rocks is of critical importance during the flow of gases in processes like, enhanced reservoir recovery and CO<sub>2</sub> sequestration. Permeability measurement depends on the geometric structure of flow path (hydraulic radius, connectivity, tortuosity), the stress regimes surrounding the rock (isotropic, deviatoric) and the characteristic of the fluid (viscosity, compressibility, pore pressure).  For the case of gas permeability within Knudsen diffusion regime (0.001 < Kn< 0.1), the effect of slippage is prominently observed.</p><p>Laboratory scale permeability experiments on an Indian sandstone having connected porosity ~10%, are performed under hydrostatic condition. Nitrogen gas is selected as pore fluid, to avoid adsorption phenomenon. Transient technique of pore-pressure-pulse decay is used for permeability measurement as it is faster and accurate to measure pressure, than the steady state method. Pore pressures and confining pressures are varied in the study to understand the relative effect of matrix compressibility and fluid compressibility on the permeability. Micro-CT analysis of sample is also performed to quantify the geometric attributes of sample.</p><p>Apparent gas permeability ranging from 0.1 to 1 micro-Darcy is obtained from the experiments. The permeability is found to be decreasing with simple effective stress (σ<sub>ii</sub>-p) for constant pore pressures. But a counter intuitive decrease in permeability with increasing pore-pressure at constant confining pressure is also evident and can be attributed to stress dependent Biot’s coefficient (λ).  Slippage corrected permeability is further analysed theoretically and numerically to formulate nonlinear permeability evolution equation in the functional form, f(σ<sub>ii</sub>-λp)  to support experimental outcomes.</p>


2021 ◽  
pp. 1-15
Author(s):  
Kelvin Abaa ◽  
John Wang ◽  
Derek Elsworth ◽  
Mku Ityokumbul

Summary Fracturing fluid filtrate that leaks off during injection is imbibed by strong capillary forces present in low-permeability sandstones and may severely reduce the effective gas permeability during cleanup and post-fracture production. This work aims to investigate the role fracturing fluid filtrate from slickwater has on rock-fluid and fluid-fluid interactions and to quantify the resulting multiphase permeability evolution during imbibition and drainage of the filtrate by means of specialized core laboratory techniques. Three suites of experiments were conducted. In the first suite of experiments, a fluid leakoff test was conducted on selected core samples to determine the extent of polymer invasion and leakoff characteristics. In the second suite, multigas relative permeability measurements were conducted on sandstone plugs saturated with fracturing fluid filtrate. A combination of controlled fluid evaporation and pulse decay permeability technique was used to measure liquid and gas effective permeabilities for both drainage and imbibition cycles. These experiments aim to capture dynamic permeability evolution during invasion and cleanup of fracturing fluid (slickwater). The final suite of experiments consists of adsorption flow tests to investigate, identify, and quantify possible mechanisms for adsorption of the polymeric molecules of friction reducers present in the fluid filtrate to the pore walls of the rock sample. Imbibition tests and observations of contact angles were conducted to validate possible wettability changes. Results from multiphase permeability flow tests show an irreversible reduction in endpoint brine permeability and relative permeability with increasing concentration of friction reducer. Our results also show that effective gas permeability during drainage/cleanup of the imbibed slickwater fluid is controlled to a large degree by trapped gas saturation than by changes in interfacial tension. Adsorption flow tests identified adsorption of polymeric molecules of the friction reducer present in the fluid to the pore walls of the rock. The adsorption friction reducer increases the wettability of the rock surface and results in the reduction of liquid relative permeability. The originality of this work is to diagnose formation damage mechanisms from laboratory experiments that adequately capture multiphase permeability evolution specific to a slickwater fluid system, during imbibition and cleanup. This will be useful in optimizing fracturing fluid selection.


Sign in / Sign up

Export Citation Format

Share Document