The starch hydrolysis and aroma retention caused by salivary α-amylase during oral processing of food

Author(s):  
Yufeng Zhang ◽  
Yong Chen ◽  
Jianshe Chen
Nutrients ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 2105 ◽  
Author(s):  
Aleixandre ◽  
Benavent-Gil ◽  
Rosell

The growing interest in controlling the glycemic index of starchy-rich food has encouraged research about the role of the physical structure of food. The aim of this research was to understand the impact of the structure and the in vitro oral processing methods on bolus behavior and starch hydrolysis of wheat bread. Two different bread structures (loaf bread and bread roll) were obtained using different shaping methods. Starch hydrolysis during in vitro oro-gastro-intestinal digestion using the INFOGEST protocol was analyzed and oral processing was simulated by applying two different disintegration processes (basic homogenizer, crystal balls). The bread structure, and thus the shaping method during breadmaking, significantly affected the bolus particle size during all digestion stages. The different in vitro oral processing methods affected the bolus particle sizes after the oral phase in both breads, but they affected the particle size distribution after the gastric and intestinal phase only in the case of loaf bread. Aggregates were observed in the gastric phase, which were significantly reduced in the intestinal phase. When simulated oral processing with crystal balls led to bigger particle size distribution, bread rolls presented the highest in vitro starch hydrolysis. The type of in vitro oral processing allowed discrimination of the performance of the structures of the two breads during starch hydrolysis. Overall, crumb structure significantly affected texture properties, but also had a significant impact on particle size during digestion and starch digestibility.


2020 ◽  
Vol 134 ◽  
pp. 109275
Author(s):  
Madhu Sharma ◽  
Joana Pico ◽  
Mario M. Martinez ◽  
Lisa Duizer

2020 ◽  
Vol 16 (2) ◽  
pp. 135-144
Author(s):  
Ravneet K. Grewal ◽  
Baldeep Kaur ◽  
Gagandeep Kaur

Background: Amylases are the most widely used biocatalysts in starch saccharification and detergent industries. However, commercially available amylases have few limitations viz. limited activity at low or high pH and Ca2+ dependency. Objective: The quest for exploiting amylase for diverse applications to improve the industrial processes in terms of efficiency and feasibility led us to investigate the kinetics of amylase in the presence of metal ions as a function of pH. Methods: The crude extract from soil fungal isolate cultures is subjected to salt precipitation, dialysis and DEAE cellulose chromatography followed by amylase extraction and is incubated with divalent metal ions (i.e., Ca2+, Fe2+, Cu2+, and Hg2+); Michaelis-Menton constant (Km), and maximum reaction velocity (Vmax) are calculated by plotting the activity data obtained in the absence and presence of ions, as a function of substrate concentration in Lineweaver-Burk Plot. Results: Kinetic studies reveal that amylase is inhibited un-competitively at 5mM Cu2+ at pH 4.5 and 7.5, but non-competitively at pH 9.5. Non-competitive inhibition of amylase catalyzed starch hydrolysis is observed with 5mM Hg2+ at pH 9.5, which changes to mixed inhibition at pH 4.5 and 7.5. At pH 4.5, Ca2+ induces K- and V-type activation of amylase catalyzed starch hydrolysis; however, the enzyme has V-type activation at 7mM Ca2+ under alkaline conditions. Also, K- and V-type of activation of amylase is observed in the presence of 7mM Fe2+ at pH 4.5 and 9.5. Conclusion: These findings suggest that divalent ions modulation of amylase is pH dependent. Furthermore, a time-saving and cost-effective solution is proposed to overcome the challenges of the existing methodology of starch hydrolysis in starch and detergent industries.


LWT ◽  
2021 ◽  
Vol 138 ◽  
pp. 110641
Author(s):  
Dandan Pu ◽  
Yuyu Zhang ◽  
Baoguo Sun ◽  
Fazheng Ren ◽  
Huiying Zhang ◽  
...  

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Morakot Krajang ◽  
Kwanruthai Malairuang ◽  
Jatuporn Sukna ◽  
Krongchan Rattanapradit ◽  
Saethawat Chamsart

Abstract Background A single-step ethanol production is the combination of raw cassava starch hydrolysis and fermentation. For the development of raw starch consolidated bioprocessing technologies, this research was to investigate the optimum conditions and technical procedures for the production of ethanol from raw cassava starch in a single step. It successfully resulted in high yields and productivities of all the experiments from the laboratory, the pilot, through the industrial scales. Yields of ethanol concentration are comparable with those in the commercial industries that use molasses and hydrolyzed starch as the raw materials. Results Before single-step ethanol production, studies of raw cassava starch hydrolysis by a granular starch hydrolyzing enzyme, StargenTM002, were carefully conducted. It successfully converted 80.19% (w/v) of raw cassava starch to glucose at a concentration of 176.41 g/L with a productivity at 2.45 g/L/h when it was pretreated at 60 °C for 1 h with 0.10% (v/w dry starch basis) of Distillase ASP before hydrolysis. The single-step ethanol production at 34 °C in a 5-L fermenter showed that Saccharomyces cerevisiae (Fali, active dry yeast) produced the maximum ethanol concentration, pmax at 81.86 g/L (10.37% v/v) with a yield coefficient, Yp/s of 0.43 g/g, a productivity or production rate, rp at 1.14 g/L/h and an efficiency, Ef of 75.29%. Scale-up experiments of the single-step ethanol production using this method, from the 5-L fermenter to the 200-L fermenter and further to the 3000-L industrial fermenter were successfully achieved with essentially good results. The values of pmax,Yp/s, rp, and Ef of the 200-L scale were at 80.85 g/L (10.25% v/v), 0.42 g/g, 1.12 g/L/h and 74.40%, respectively, and those of the 3000-L scale were at 70.74 g/L (8.97% v/v), 0.38 g/g, 0.98 g/L/h and 67.56%, respectively. Because of using raw starch, major by-products, i.e., glycerol, lactic acid, and acetic acid of all three scales were very low, in ranges of 0.940–1.140, 0.046–0.052, 0.000–0.059 (% w/v), respectively, where are less than those values in the industries. Conclusion The single-step ethanol production using the combination of raw cassava starch hydrolysis and fermentation of three fermentation scales in this study is practicable and feasible for the scale-up of industrial production of ethanol from raw starch.


Sign in / Sign up

Export Citation Format

Share Document