The adsorption of Cationic Dye onto ACPMG@ ZIF-8 Core-Shell, Optimization Using Central Composite Response Surface Methodology (CCRSM)

2021 ◽  
pp. 128039
Author(s):  
Soheila Sharafinia ◽  
Abdolhadi Farrokhnia ◽  
Ensieh Ghasemian Lemraski
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Core Shell ◽  
Cationic Dye ◽  
Shell Optimization ◽  
Composite Response ◽  
Central Composite

scholarly journals Molybdenum(VI) removal from aqueous solutions using bentonite and powdered cockle shell; Optimization by response surface methodology

2017 ◽  
Vol 19 (2) ◽  
pp. 232-240 ◽  
Keyword(s):  
Response Surface Methodology ◽  
Aqueous Solutions ◽  
Response Surface ◽  
Removal Efficiency ◽  
Initial Concentration ◽  
Effects Of Ph ◽  
Shell Optimization ◽  
Central Composite ◽  
Cockle Shell ◽  
P Removal

Removal of Mo(VI) from aqueous solutions by using bentonite and powdered cockle shell was conducted in this research. First, the effects of pH and initial Mo(VI) concentration on the Mo removal efficiency via shell and bentonite were studied. Results showed that Mo removal effectiveness increased as pH increased until 3.5. Removal efficiency of Mo via bentonite and shell also increased as initial Mo(VI) concentration increased to 30 or 40 mg/L, respectively, after which the removal efficiency decreased. Response surface methodology and central composite design were applied to optimize removal effectiveness. Initial concentration of Mo(VI) (mg/L), pH, and shaking time (min) were selected as independent factors. These results showed that bentonite is more effective in removing Mo from water than the shell. At the optimum condition of 5.8 pH, initial Mo concentration of 39.2 mg/L, and shaking time of 38.6 min, bentonite could remove 81.3% of Mo.

Enzyme-assisted Extraction for Optimized Recovery of Phenolic Bioactives from Peganum hermala Leaves Using Response Surface Methodology

2018 ◽  
Vol 17 (4) ◽  
pp. 349-354
Author(s):  
Qadir Rahman ◽  
Anwar Farooq ◽  
Amjad Gilani Mazhar ◽  
Nadeem Yaqoob Muhammad ◽  
Ahmad Mukhtar
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Enzyme Concentration ◽  
Coumaric Acid ◽  
Assisted Extraction ◽  
Pre Treatment ◽  
Optimized Conditions ◽  
Enzyme Complexes ◽  
Hydrolysis Of ◽  
Central Composite

This study investigates the effect of enzyme formulations (Zympex-014, Kemzyme dry-plus and Natuzyme) on recovery of phenolics from Peganum hermala (harmal) leaves, under optimized conditions using response surface methodology. As compared to the other enzyme complexes, the yield (34 g/100g) obtained through Zympex-014-assisted extraction was higher under optimized conditions such as time (75 min), temperature (70°C), pH (6.5) and enzyme concentration (5 g/100 g) using central composite design (CCD). Effectiveness of Zympex-014 towards hydrolysis of P. hermala leaves cell wall was examined by analyzing the control and enzyme-treated leave residues using scanning electron microscope (SEM). GC/MS characterization authenticated the presence of quercetin (1.44), gallic acid (0.23), caffeic acid (0.04), cinnamic acid (0.05), m-coumaric acid (0.23) and p-coumaric acid (0.37 μg/g) as the potent phenolics in Zympex-014 based extract. It can be concluded from the findings of the current work that pre-treatment of P. hermala leaves with Zympex-014 significantly enhanced the recovery of phenolics that supports its potential uses in the nutra-pharamaceutical industry.

Response Surface Methodology towards Optimization of Calotropis Procera Essential oil Extraction by using Supercritical CO2.

2019 ◽  
Vol 09 ◽  
Author(s):  
Hossein Zaeri ◽  
Bahareh Kamyab Moghadas ◽  
Bijan Honarvar ◽  
Ali Shokuhi Rad
Keyword(s):  
Response Surface Methodology ◽  
Essential Oil ◽  
Response Surface ◽  
Extraction Time ◽  
Calotropis Procera ◽  
Retrieval Rate ◽  
The Family ◽  
Effects Of Temperature ◽  
Carbon Dioxide Co2 ◽  
Central Composite

: In this research, the extraction of essential oil from Calotropis Procera with the family name of Asclepiadaceae, by supercritical carbon dioxide (CO2) solvent has been investigated in detail, and the yield and chemical profile of the extracts achieved by this method were compared with those resulted by the conventional Hydro distillation method. To optimize the process parameters of CO2 supercritical extraction (SCE) of the Calotropis Procera, the Response Surface Methodology (RSM) with central composite design (CCD) was employed. The effects of temperature, pressure, and extraction time on the oil yield are considered for investigation. Results showed that the data were sufficiently fitted into the second-order polynomial model. The extraction conditions, including pressure, temperature, and extraction time, were studied between 150-200 bar, 40-50 ºC, and 50-100 min, respectively. The optimal conditions are achieved as the temperature of 47.19ºC, the pressure of 172.2 bar, and time of 86 minutes with the retrieval rate of 31.39%.

scholarly journals Optimizing of Microalgae Scenedesmus sp. Biomass Production in Wet Market Wastewater Using Response Surface Methodology

2021 ◽  
Vol 13 (4) ◽  
pp. 2216
Author(s):  
Najeeha Mohd Apandi ◽  
Mimi Suliza Muhamad ◽  
Radin Maya Saphira Radin Mohamed ◽  
Norshuhaila Mohamed Sunar ◽  
Adel Al-Gheethi ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Biomass Yield ◽  
Biomass Productivity ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Aeration Rate ◽  
Composition Analysis ◽  
Wet Market ◽  
Central Composite

The present study aimed to optimize the production of Scenedesmus sp. biomass during the phycoremediation process. The biomass productivity was optimized using face centred central composite design (FCCCD) in response surface methodology (RSM) as a function of two independent variables that included wet market wastewater concentrations (A) with a range of 10% to 75% and aeration rate (B) with a range of 0.02 to 4.0 L/min. The results revealed that the highest biomass productivity (73 mg/L/d) and maximum growth rate (1.19 day−1) was achieved with the 64.26% of (A) and 3.08 L/min of (B). The GC-MS composition analysis of the biomass yield extract revealed that the major compounds are hexadecane (25%), glaucine (16.2%), and phytol (8.33%). The presence of these compounds suggests that WMW has the potential to be used as a production medium for Scenedesmus sp. Biomass, which has several applications in the pharmaceutical and chemical industry.

scholarly journals Optimization of Eugenol Extraction from Clove Oil using Response Surface Methodology

2015 ◽  
Vol 9 (11) ◽  
pp. 68
Author(s):  
Widayat Widayat ◽  
Hadiyanto Hadiyanto ◽  
Bambang Cahyono ◽  
Ngadiwiyana Ngadiwiyana
Keyword(s):  
Response Surface Methodology ◽  
Optimum Condition ◽  
Central Composite Design ◽  
Response Surface ◽  
Design Method ◽  
Main Process ◽  
Clove Oil ◽  
Design Variables ◽  
Central Composite

The objective of this research was to obtain optimum condition of eugenol production from clove oil using a central composite design method. The main process occured in the eugenol production was saphonification and neutralization processes. In order to optimize these processes, the ratio of NaOH/clove oil and temperature were studied as design variables i.e. ratio of NaOH/clove oil=1:2.5-1:3.5 while temperature was varied between 40 and 60oC. The yield of eugenol was considered as the main response in of this experiment. The result showed that the optimum condition was achieved when the temperature and the ratio of NaOH/clove oil were 50oC and 2.75:1, respectively and the yield was 39.17%.<br />

Sign in / Sign up

Export Citation Format

Share Document