Using quantitative infrared thermography to determine indoor air temperature

2013 ◽  
Vol 65 ◽  
pp. 292-298 ◽  
Author(s):  
César Porras-Amores ◽  
Fernando R. Mazarrón ◽  
Ignacio Cañas
Keyword(s):  
Infrared Thermography ◽  
Air Temperature ◽  
Indoor Air

Simulation of the internal temperature in the Passol Laboratory, University of Debrecen

2012 ◽  
Vol 3 (1) ◽  
pp. 63-73 ◽  
Author(s):  
I. Csáky ◽  
F. Kalmár
Keyword(s):  
Temperature Variation ◽  
Air Temperature ◽  
Indoor Air ◽  
Storage Capacity ◽  
Building Structures ◽  
Internal Temperature ◽  
The One ◽  
Heavy Structure ◽  
East West ◽  
Made In

Abstract Nowadays the facades of newly built buildings have significant glazed surfaces. The solar gains in these buildings can produce discomfort caused by direct solar radiation on the one hand and by the higher indoor air temperature on the other hand. The amplitude of the indoor air temperature variation depends on the glazed area, orientation of the facade and heat storage capacity of the building. This paper presents the results of a simulation, which were made in the Passol Laboratory of University of Debrecen in order to define the internal temperature variation. The simulation proved that the highest amplitudes of the internal temperature are obtained for East orientation of the facade. The upper acceptable limit of the internal air temperature is exceeded for each analyzed orientation: North, South, East, West. Comparing different building structures, according to the obtained results, in case of the heavy structure more cooling hours are obtained, but the energy consumption for cooling is lower.

Indoor air temperature modelling: Thermal retrofitting of historical building

2021 ◽  
Author(s):  
Jan Kočí ◽  
Laura Ré Luvisotto ◽  
Jiří Maděra
Keyword(s):  
Air Temperature ◽  
Indoor Air ◽  
Historical Building

scholarly journals Energy-saving potential of intermittent heating system: Influence of composite phase change wall and optimization strategy

2020 ◽  
pp. 014459872096921
Author(s):  
Yanru Li ◽  
Enshen Long ◽  
Lili Zhang ◽  
Xiangyu Dong ◽  
Suo Wang
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Phase Change ◽  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Optimization Strategy ◽  
Indoor Thermal Environment ◽  
Indoor Thermal Comfort ◽  
Intermittent Heating

In the Yangtze River zone of China, the heating operation in buildings is mainly part-time and part-space, which could affect the indoor thermal comfort while making the thermal process of building envelope different. This paper proposed to integrate phase change material (PCM) to building walls to increase the indoor thermal comfort and attenuate the temperature fluctuations during intermittent heating. The aim of this study is to investigate the influence of this kind of composite phase change wall (composite-PCW) on the indoor thermal environment and energy consumption of intermittent heating, and further develop an optimization strategy of intermittent heating operation by using EnergyPlus simulation. Results show that the indoor air temperature of the building with the composite-PCW was 2–3°C higher than the building with the reference wall (normal foamed concrete wall) during the heating-off process. Moreover, the indoor air temperature was higher than 18°C and the mean radiation temperature was above 20°C in the first 1 h after stopping heating. Under the optimized operation condition of turning off the heating device 1 h in advance, the heat release process of the composite-PCW to the indoor environment could maintain the indoor thermal environment within the comfortable range effectively. The composite-PCW could decrease 4.74% of the yearly heating energy consumption compared with the reference wall. The optimization described can provide useful information and guidance for the energy saving of intermittently heated buildings.

scholarly journals Thermal history and comfort in a Brazilian subtropical climate: a 'cool' addiction hypothesis

2016 ◽  
Vol 16 (1) ◽  
pp. 7-20 ◽  
Author(s):  
Renata De Vecchi ◽  
Christhina Maria Cândido ◽  
Roberto Lamberts
Keyword(s):  
Air Temperature ◽  
Indoor Air ◽  
Thermal History ◽  
Air Conditioning ◽  
Prolonged Exposure ◽  
Temperature Fluctuations ◽  
Subtropical Climate ◽  
Indoor Thermal Comfort ◽  
Air Speed ◽  
The Impact

Abstract Currently, there is a rising trend for commercial buildings to use air conditioning to provide indoor thermal comfort. This paper focuses on the impact of prolonged exposure to indoor air-conditioned environments on occupants' thermal acceptability and preferences in a mixed-mode building in Brazil. Questionnaires were administered while indoor microclimatic measurements were carried out (i.e., air temperature, radiant air temperature, air speed and humidity). Results suggest significant differences in occupants' thermal acceptability and cooling preferences based on thermal history; differences were found between groups based on different physical characteristics (i.e., different gender and body condition). The findings also indicated a significant potential to implement temperature fluctuations indoors when occupants are exposed to air conditioning environments in warm and humid climates.

scholarly journals An Interactive Task Conditioning System Featuring Personal Comfort Models and Non-Intrusive Sensing Techniques: A Field Study in Shanghai

Technologies ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 90
Author(s):  
Siliang Lu ◽  
Erica Cochran Hameen
Keyword(s):  
Thermal Comfort ◽  
Field Study ◽  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
New Paradigm ◽  
Dynamic Task ◽  
Current Task ◽  
Open Plan

Heating, ventilation and air-conditioning (HVAC) systems play a key role in shaping office environments. However, open-plan office buildings nowadays are also faced with problems like unnecessary energy waste and an unsatisfactory shared indoor thermal environment. Therefore, it is significant to develop a new paradigm of an HVAC system framework so that everyone could work under their preferred thermal environment and the system can achieve higher energy efficiency such as task ambient conditioning system (TAC). However, current task conditioning systems are not responsive to personal thermal comfort dynamically. Hence, this research aims to develop a dynamic task conditioning system featuring personal thermal comfort models with machine learning and the wireless non-intrusive sensing system. In order to evaluate the proposed task conditioning system performance, a field study was conducted in a shared office space in Shanghai from July to August. As a result, personal thermal comfort models with indoor air temperature, relative humidity and cheek (side face) skin temperature have better performances than baseline models with indoor air temperature only. Moreover, compared to personal thermal satisfaction predictions, 90% of subjects have better performances in thermal sensation predictions. Therefore, personal thermal comfort models could be further implemented into the task conditioning control of TAC systems.

scholarly journals INDOOR AIR TEMPERATURE DISTRIBUTION – AN ALTERNATIVE APPROACH TO BUILDING SIMULATION

2003 ◽  
Vol 2 (1) ◽  
Author(s):  
A. T. Franco ◽  
C. O. R. Negrão
Keyword(s):  
Temperature Distribution ◽  
Air Temperature ◽  
Indoor Air ◽  
Linear Equations ◽  
Three Dimensional ◽  
Momentum Conservation ◽  
Conservation Equation ◽  
Algebraic Equations ◽  
Conservation Of Energy ◽  
Energy Conservation Equation

The current paper presents a model to predict indoor air temperature distribution. The approach is based on the energy conservation equation which is written for a certain number of finite volumes within the flow domain. The magnitude of the flow is estimated from a scale analysis of the momentum conservation equation. Discretized two or three-dimensional domains provide a set of algebraic equations. The resulting set of non-linear equations is iteratively solved using the line-by-line Thomas Algorithm. As long as the only equation to be solved is the conservation of energy and its coefficients are not strongly dependent on the temperature field, the solution is considerably fast. Therefore, the application of such model to a whole building system is quite reasonable. Two case studies involving buoyancy driven flows were carried out and comparisons with CFD solutions were performed. The results are quite promising for cases involving relatively strong couplings between heat and airflow.

scholarly journals Air Distribution and Air Handling Unit Configuration Effects on Energy Performance in an Air-Heated Ice Rink Arena

Energies ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 693 ◽  
Author(s):  
Mehdi Taebnia ◽  
Sander Toomla ◽  
Lauri Leppä ◽  
Jarek Kurnitski
Keyword(s):  
Temperature Gradient ◽  
Air Temperature ◽  
Indoor Air ◽  
Energy Demand ◽  
Energy Performance ◽  
Air Distribution ◽  
Air Handling Unit ◽  
Cooling Coil ◽  
Indoor Conditions ◽  
Cooling Energy Demand

Indoor ice rink arenas are among the foremost consumers of energy within building sector due to their exclusive indoor conditions. A single ice rink arena may consume energy of up to 3500 MWh annually, indicating the potential for energy saving. The cooling effect of the ice pad, which is the main source for heat loss, causes a vertical indoor air temperature gradient. The objective of the present study is twofold: (i) to study vertical temperature stratification of indoor air, and how it impacts on heat load toward the ice pad; (ii) to investigate the energy performance of air handling units (AHU), as well as the effects of various AHU layouts on ice rinks’ energy consumption. To this end, six AHU configurations with different air-distribution solutions are presented, based on existing arenas in Finland. The results of the study verify that cooling energy demand can significantly be reduced by 38 percent if indoor temperature gradient approaches 1 °C/m. This is implemented through air distribution solutions. Moreover, the cooling energy demand for dehumidification is decreased to 59.5 percent through precisely planning the AHU layout, particularly at the cooling coil and heat recovery sections. The study reveals that a more customized air distribution results in less stratified indoor air temperature.

scholarly journals Mitigation Strategies for Overheating and High Carbon Dioxide Concentration within Institutional Buildings: A Case Study in Toronto, Canada

Buildings ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 124 ◽  
Author(s):  
Claire Tam ◽  
Yuqing Zhao ◽  
Zaiyi Liao ◽  
Lian Zhao
Keyword(s):  
Carbon Dioxide ◽  
Air Quality ◽  
Indoor Air Quality ◽  
Air Temperature ◽  
Indoor Air ◽  
Indoor Environment ◽  
Thermal Conditions ◽  
Co2 Concentration ◽  
Hvac System

Indoor air quality and thermal conditions are important considerations when designing indoor spaces to ensure occupant health, satisfaction, and productivity. Carbon dioxide (CO2) concentration and indoor air temperature are two measurable parameters to assess air quality and thermal conditions within a space. Occupants are progressively affected by the indoor environment as the time spent indoors prolongs. Specifically, there is an interest in carrying out investigations on the indoor environment through surveying existing Heating, Ventilation, Air Conditioning (HVAC) system operations in classrooms. Indoor air temperature and CO2 concentration in multiple lecture halls in Toronto, Canada were monitored; observations consistently show high indoor air temperature (overheating) and high CO2 concentration. One classroom is chosen as a representative case study for this paper. The results verify a strong correlation between the number of occupants and the increase in air temperature and CO2 concentration. Building Energy Simulation (BES) is used to investigate the causes of discomfort in the classroom, and to identify methods for regulating the temperature and CO2 concentration. This paper proposes retro-commissioning strategies that could be implemented in institutional buildings; specifically, the increase of outdoor airflow rate and the addition of occupancy-based pre-active HVAC system control. The proposed retrofit cases reduce the measured overheating in the classrooms by 2-3 °C (indoor temperature should be below 23 °C) and maintain CO2 concentration under 900 ppm (the CO2 threshold is 1000 ppm), showing promising improvements to a classroom’s thermal condition and indoor air quality.

Sign in / Sign up

Export Citation Format

Share Document