scholarly journals Comparison of wood pyrolysis kinetic data derived from thermogravimetric experiments by model-fitting and model-free methods

2020 ◽  
Vol 212 ◽  
pp. 112818 ◽  
Author(s):  
Antonio Soria-Verdugo ◽  
Marco Tomasi Morgano ◽  
Hartmut Mätzing ◽  
Elke Goos ◽  
Hans Leibold ◽  
...  
Keyword(s):  
Kinetic Data ◽  
Model Fitting ◽  
Wood Pyrolysis ◽  
Model Free ◽  
Pyrolysis Kinetic

scholarly journals Energy Utilization of Building Insulation Waste Expanded Polystyrene: Pyrolysis Kinetic Estimation by a New Comprehensive Method

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1744 ◽  
Author(s):  
Xiaoyang Ni ◽  
Zheng Wu ◽  
Wenlong Zhang ◽  
Kaihua Lu ◽  
Yanming Ding ◽  
...  
Keyword(s):  
Kinetic Parameters ◽  
Thermal Insulation ◽  
Large Scale ◽  
Model Fitting ◽  
Pso Algorithm ◽  
Expanded Polystyrene ◽  
Energy Utilization ◽  
Pyrolysis Kinetics ◽  
Model Free ◽  
Pyrolysis Kinetic

Expanded polystyrene (EPS) has excellent thermal insulation properties and is widely applied in building energy conservation. However, these thermal insulation materials have caused numerous fires because of flammability. Pyrolysis is necessary to support combustion, and more attention should be paid to the pyrolysis characteristics of EPS. Moreover, pyrolysis is considered to be an effective method for recycling solid waste. Pyrolysis kinetics of EPS were analyzed by thermogravimetric experiments, both in nitrogen and air atmospheres. A new method was proposed to couple the Flynn–Wall–Ozawa model-free method and the model-fitting method called the Coats–Redfern as well as the particle swarm optimization (PSO) global algorithm to establish reaction mechanisms and their corresponding kinetic parameters. It was found that the pyrolysis temperature of EPS was concentrated at 525–800 K. The activation energy of EPS in nitrogen was about 163 kJ/mol, which was higher than that in air (109.63 kJ/mol). Furthermore, coupled with Coats–Redfern method, reaction functions g(α) = 1 − (1 − α)3 and g(α) = 1 − (1 − α)1/4 should be responsible for nitrogen and air reactions, respectively. The PSO algorithm was applied to compute detailed pyrolysis kinetic parameters. Kinetic parameters could be used in further large-scale fire simulation and provide guidance for reactor design.

Thermo-catalytic decomposition of polystyrene waste: Comparative analysis using different kinetic models

2019 ◽  
Vol 38 (2) ◽  
pp. 202-212 ◽  
Author(s):  
Ghulam Ali ◽  
Jan Nisar ◽  
Munawar Iqbal ◽  
Afzal Shah ◽  
Mazhar Abbas ◽  
...  
Keyword(s):  
Activation Energy ◽  
Copper Oxide ◽  
Solid Waste ◽  
Thermodynamic Parameters ◽  
Model Fitting ◽  
Catalytic Decomposition ◽  
Decomposition Reaction ◽  
Inert Atmosphere ◽  
Heating Rates ◽  
Model Free

Due to a huge increase in polymer production, a tremendous increase in municipal solid waste is observed. Every year the existing landfills for disposal of waste polymers decrease and the effective recycling techniques for waste polymers are getting more and more important. In this work pyrolysis of waste polystyrene was performed in the presence of a laboratory synthesized copper oxide. The samples were pyrolyzed at different heating rates that is, 5°Cmin−1, 10°Cmin−1, 15°Cmin−1 and 20°Cmin−1 in a thermogravimetric analyzer in inert atmosphere using nitrogen. Thermogravimetric data were interpreted using various model fitting (Coats–Redfern) and model free methods (Ozawa–Flynn–Wall, Kissinger–Akahira–Sunose and Friedman). Thermodynamic parameters for the reaction were also determined. The activation energy calculated applying Coats–Redfern, Ozawa–Flynn–Wall, Kissinger–Akahira–Sunose and Friedman models were found in the ranges 105–148.48 kJmol−1, 99.41–140.52 kJmol−1, 103.67–149.15 kJmol−1 and 99.93–141.25 kJmol−1, respectively. The lowest activation energy for polystyrene degradation in the presence of copper oxide indicates the suitability of catalyst for the decomposition reaction to take place at lower temperature. Moreover, the obtained kinetics and thermodynamic parameters would be very helpful in determining the reaction mechanism of the solid waste in a real system.

Crystallization kinetics mechanism investigation of sol–gel-derived NaYF4:(Yb,Er) up-converting phosphors

CrystEngComm ◽  
2017 ◽  
Vol 19 (34) ◽  
pp. 4992-5000 ◽  
Author(s):  
C. Bartha ◽  
C. E. Secu ◽  
E. Matei ◽  
M. Secu
Keyword(s):  
Differential Scanning Calorimetry ◽  
Crystallization Kinetics ◽  
Sol Gel ◽  
Model Fitting ◽  
Crystallization Mechanism ◽  
Differential Scanning Calorimetry Analysis ◽  
Scanning Calorimetry ◽  
Model Free

The crystallization mechanism of sol–gel-derived NaYF4:(Yb,Er) up-converting phosphors has been studied by differential scanning calorimetry analysis using both model-free and model fitting approaches.

scholarly journals Dynamic Model-Free and Model-Fitting Kinetic Analysis during Torrefaction of Oil Palm Frond Pellets

2020 ◽  
Vol 15 (1) ◽  
pp. 253-263
Author(s):  
Sharmeela Matali ◽  
Norazah Abd Rahman ◽  
Siti Shawalliah Idris ◽  
Nurhafizah Yaacob
Keyword(s):  
Activation Energy ◽  
Thermal Degradation ◽  
Oil Palm ◽  
Model Fitting ◽  
Integral Model ◽  
Model Free ◽  
Solid Biofuel ◽  
Oil Palm Frond ◽  
Kinetics Of ◽  
Palm Frond

Torrefaction is a thermal conversion method extensively used for improving the properties of biomass. Usually this process is conducted within a temperature range of 200-300 °C under an inert atmosphere with residence time up to 60 minutes. This work aimed to study the kinetic of thermal degradation of oil palm frond pellet (OPFP) as solid biofuel for bioenergy production. The kinetics of OPFP during torrefaction was studied using frequently used iso-conversional model fitting (Coats-Redfern (CR)) and integral model-free (Kissinger-Akahira-Sunose (KAS)) methods in order to provide effective apparent activation energy as a function of conversion. The thermal degradation experiments were conducted at four heating rates of 5, 10, 15, and 20 °C/min in a thermogravimetric analyzer (TGA) under non-oxidative atmosphere. The results revealed that thermal decomposition kinetics of OPFP during torrefaction is significantly influenced by the severity of torrefaction temperature. Via Coats-Redfern method, torrefaction degradation reaction mechanism follows that of reaction order with n = 1. The activation energy values were 239.03 kJ/mol and 109.28 kJ/mol based on KAS and CR models, respectively. Copyright © 2020 BCREC Group. All rights reserved 

scholarly journals Kinetic Analysis of the Thermal Decomposition of Polymer-Bonded Explosive Based on PETN: Model-Fitting Method and Isoconversional Method

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Trung Toan Nguyen ◽  
Duc Nhan Phan ◽  
Van Thom Do ◽  
Hoang Nam Nguyen
Keyword(s):  
Thermal Decomposition ◽  
Kinetic Parameters ◽  
Model Fitting ◽  
Isoconversional Method ◽  
Isothermal Tg ◽  
Decomposition Reactions ◽  
Model Free ◽  
Negative Effect ◽  
Adverse Influence ◽  
Vacuum Stability Test

This work investigates kinetics and thermal decomposition behaviors of pentaerythritol tetranitrate (PETN) and two polymer-bonded explosive (PBX) samples created from PETN (named as PBX-PN-85 and PBX-PP-85) using the vacuum stability test (VST) and thermogravimetry (TG/DTG) techniques. Both model-free (isoconversional) and model-fitting methods were applied to determine the kinetic parameters of the thermal decomposition. It was found that kinetic parameters obtained by the modified Kissinger–Akahira–Sunose method (using non-isothermal TG/DTG data) were close to those obtained by the isoconversional and model-fitting methods that use isothermal VST data. The activation energy values of thermal decomposition reactions were 125.6–137.1, 137.3–144.9, and 143.9–152.4 kJ·mol−1 for PBX-PN-85, PETN, and PBX-PP-85, respectively. The results demonstrate the negative effect of the nitrocellulose-based binder in reducing the thermal stability of single PETN, while the polystyrene-based binder seemingly shows no adverse influence on the thermal decomposition of PETN in our presented PBX compositions.

scholarly journals Pyrolysis Kinetic Properties of Thermal Insulation Waste Extruded Polystyrene by Multiple Thermal Analysis Methods

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5595
Author(s):  
Ang Li ◽  
Wenlong Zhang ◽  
Juan Zhang ◽  
Yanming Ding ◽  
Ru Zhou
Keyword(s):  
Reaction Mechanism ◽  
Thermal Insulation ◽  
Conversion Rate ◽  
Model Fitting ◽  
Pso Algorithm ◽  
Energy Utilization ◽  
Kinetic Properties ◽  
Insulation Material ◽  
Heating Rates ◽  
Model Free

Extruded polystyrene (XPS) is a thermal insulation material extensively applied in building systems. It has attracted much attention because of outstanding thermal insulation performance, obvious flammability shortcoming and potential energy utilization. To establish the reaction mechanism of XPS’s pyrolysis, thermogravimetric experiments were performed at different heating rates in nitrogen, and multiple methods were employed to analyze the major kinetics of pyrolysis. More accurate kinetic parameters of XPS were estimated by four common model-free methods. Then, three model-fitting methods (including the Coats-Redfern, the iterative procedure and masterplots method) were used to establish the kinetic model. Since the kinetic models established by the above three model-fitting methods were not completely consistent based on different approximations, considering the effect of different approximates on the model, the reaction mechanism was further established by comparing the conversion rate based on the model-fitting methods corresponding to the possible reaction mechanisms. Finally, the accuracy of the above model-fitting methods and Particle Swarm Optimization (PSO) algorithm were compared. Results showed that the reaction function g(α) = (1 − α)−1 − 1 might be the most suitable to characterize the pyrolysis of XPS. The conversion rate calculated by masterplots and PSO methods could provide the best agreement with the experimental data.

scholarly journals Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods

2020 ◽  
Vol 38 (1_suppl) ◽  
pp. 77-85 ◽  
Author(s):  
Zhitong Yao ◽  
Shaoqi Yu ◽  
Weiping Su ◽  
Weihong Wu ◽  
Junhong Tang ◽  
...  
Keyword(s):  
Reaction Mechanism ◽  
Thermogravimetric Analysis ◽  
Compensation Effect ◽  
Model Fitting ◽  
Plastic Waste ◽  
Plastic Shell ◽  
Ozawa Method ◽  
Heating Rates ◽  
Helium Atmosphere ◽  
Model Free

In this work, the pyrolysis behavior of plastic waste—TV plastic shell—was investigated, based on thermogravimetric analysis and using a combination of model-fitting and model-free methods. The possible reaction mechanism and kinetic compensation effects were also examined. Thermogravimetric analysis indicated that the decomposition of plastic waste in a helium atmosphere can be divided into three stages: the minor loss stage (20–300°C), the major loss stage (300–500°C) and the stable loss stage (500–1000°C). The corresponding weight loss at three different heating rates of 15, 25 and 35 K/min were determined to be 2.80–3.02%, 94.45–95.11% and 0.04–0.16%, respectively. The activation energy ( Ea) and correlation coefficient ( R2) profiles revealed that the kinetic parameters calculated using the Friedman and Kissinger–Akahira–Sunose method displayed a similar trend. The values from the Flynn–Wall–Ozawa and Starink methods were comparable, although the former gave higher R2 values. The Eα values gradually decreased from 269.75 kJ/mol to 184.18 kJ/mol as the degree of conversion ( α) increased from 0.1 to 0.8. Beyond this range, the Eα slightly increased to 211.31 kJ/mol. The model-fitting method of Coats–Redfern was used to predict the possible reaction mechanism, for which the first-order model resulted in higher R2 values than and comparable Eα values to those obtained from the Flynn–Wall–Ozawa method. The pre-exponential factors (ln A) were calculated based on the F1 reaction model and the Flynn–Wall–Ozawa method, and fell in the range 59.34–48.05. The study of the kinetic compensation effect confirmed that a compensation effect existed between Ea and ln A during the plastic waste pyrolysis.

Model-fitting and model-free nonisothermal curing kinetics of epoxy resin with a low-volatile five-armed starlike aliphatic polyamine

2011 ◽  
Vol 525 (1-2) ◽  
pp. 31-39 ◽  
Author(s):  
Jintao Wan ◽  
Zhi-Yang Bu ◽  
Cun-Jin Xu ◽  
Hong Fan ◽  
Bo-Geng Li
Keyword(s):  
Epoxy Resin ◽  
Model Fitting ◽  
Curing Kinetics ◽  
Model Free ◽  
Kinetics Of
Sign in / Sign up

Export Citation Format

Share Document