An outlook of end-use energy demand based on a clean energy and technology transformation of the household sector in Nepal

Energy ◽  
2022 ◽  
Vol 238 ◽  
pp. 121810
Author(s):  
Sunil Malla
Author(s):  
Molla Asmare ◽  
Mustafa Ilbas

Nowadays, the most decisive challenges we are fronting are perfectly clean energy making for equitable and sustainable modern energy access, and battling the emerging alteration of the climate. This is because, carbon-rich fuels are the fundamental supply of utilized energy for strengthening human society, and it will be sustained in the near future. In connection with this, electrochemical technologies are an emerging and domineering tool for efficiently transforming the existing scarce fossil fuels and renewable energy sources into electric power with a trivial environmental impact. Compared with conventional power generation technologies, SOFC that operate at high temperature is emerging as a frontrunner to convert the fuels chemical energy into electric power and permits the deployment of varieties of fuels with negligible ecological destructions. According to this critical review, direct ammonia is obtained as a primary possible choice and price-effective green fuel for T-SOFCs. This is because T-SOFCs have higher volumetric power density, mechanically stable, and high thermal shocking resistance. Also, there is no sealing issue problem which is the chronic issues of the planar one. As a result, the toxicity of ammonia to use as a fuel is minimized if there may be a leakage during operation. It is portable and manageable that can be work everywhere when there is energy demand. Besides, manufacturing, onboard hydrogen deposition, and transportation infrastructure connected snags of hydrogen will be solved using ammonia. Ammonia is a low-priced carbon-neutral source of energy and has more stored volumetric energy compared with hydrogen. Yet, to utilize direct NH3 as a means of hydrogen carrier and an alternative green fuel in T-SOFCs practically determining the optimum operating temperatures, reactant flow rates, electrode porosities, pressure, the position of the anode, thickness and diameters of the tube are still requiring further improvement. Therefore, mathematical modeling ought to be developed to determine these parameters before planning for experimental work. Also, a performance comparison of AS, ES, and CS- T-SOFC powered with direct NH3 will be investigated and best-performed support will be carefully chosen for practical implementation and an experimental study will be conducted for verification based on optimum parameter values obtained from numerical modeling.


F1000Research ◽  
2018 ◽  
Vol 7 ◽  
pp. 271
Author(s):  
Salman Khan Promon ◽  
Wasif Kamal ◽  
Shafkat Shamim Rahman ◽  
M. Mahboob Hossain ◽  
Naiyyum Choudhury

Background: The requirement of an alternative clean energy source is increasing with the elevating energy demand of modern age. Bioethanol is considered as an excellent candidate to satiate this demand.Methods:Yeast isolates were used for the production of bioethanol using cellulosic vegetable wastes as substrate. Efficient bioconversion of lignocellulosic biomass into ethanol was achieved by the action of cellulolytic bacteria (Bacillus subtilis).  After proper isolation, identification and characterization of stress tolerances (thermo-, ethanol-, pH-, osmo- & sugar tolerance), optimization of physiochemical parameters for ethanol production by the yeast isolates was assessed. Very inexpensive and easily available raw materials (vegetable peels) were used as fermentation media. Fermentation was optimized with respect to temperature, reducing sugar concentration and pH.Results:It was observed that temperatures of 30°C and pH 6.0 were optimum for fermentation with a maximum yield of ethanol. The results indicated an overall increase in yields upon the pretreatment ofBacillus subtilis; maximum ethanol percentages for isolate SC1 obtained after 48-hour incubation under pretreated substrate was 14.17% in contrast to untreated media which yielded 6.21% after the same period. Isolate with the highest ethanol production capability was identified as members of the ethanol-producingSaccharomycesspecies after stress tolerance studies and biochemical characterization using Analytical Profile Index (API) ® 20C AUX and nitrate broth test. Introduction ofBacillus subtilisincreased the alcohol production rate from the fermentation of cellulosic materials.Conclusions:The study suggested that the kitchen waste can serve as an excellent raw material in ethanol fermentation.


2021 ◽  
Vol 894 (1) ◽  
pp. 012011
Author(s):  
Z D Nurfajrin ◽  
B Satiyawira

Abstract The Indonesian government has followed up the Paris Agreement with Law No. 16 of 2016 by setting an ambitious emission reduction target of 29% by 2030, and this figure could even increase to 41% if supported by international assistance. In line with this, mitigation efforts are carried out in the energy sector. Especially in the energy sector, it can have a significant impact when compared to other sectors due to an increase in energy demand, rapid economic growth, and an increase in living standards that will push the rate of emission growth in the energy sector up to 6. 7% per year. The bottom-up AIM/end-use energy model can select the technologies in the energy sector that are optimal in reducing emissions and costs as a long-term strategy in developing national low-carbon technology. This model can use the Marginal Abatement Cost (MAC) approach to evaluate the potential for GHG emission reductions by adding a certain amount of costs for each selected technology in the target year compared to the reference technology in the baseline scenario. In this study, three scenarios were used as mitigation actions, namely CM1, CM2, CM3. The Abatement Cost Curve tools with an assumed optimum tax value of 100 USD/ton CO2eq, in the highest GHG emission reduction potential, are in the CM3 scenario, which has the most significant reduction potential, and the mitigation costs are not much different from other scenarios. For example, PLTU – supercritical, which can reduce a significant GHG of 37.39 Mtoe CO2eq with an emission reduction cost of -23.66 $/Mtoe CO2eq.


2021 ◽  
Vol 61 (2) ◽  
pp. 466
Author(s):  
Prakash Sharma ◽  
Benjamin Gallagher ◽  
Jonathan Sultoon

Australia is in a bind. It is at the heart of the pivot to clean energy: it contains some of the world’s best solar irradiance and vast potential for large-scale carbon capture and storage; it showed the world the path forward with its stationary storage flexibility at the much vaunted Hornsdale power reserve facility; and it moved quickly to capitalise on low-carbon hydrogen production. Yet it remains one of the largest sources for carbon-intensive energy exports in the world. The extractive industries are still delivering thermal coal for power generation and metallurgical coal for carbon-intensive steel making in Asian markets. Even liquefied natural gas’s green credentials are being questioned. Are these two pathways compatible? The treasury and economy certainly benefit. But there is a huge opportunity to redress the source of those funds and jobs, while fulfilling the aspirations to reach net zero emissions by 2050. In our estimates, the low-carbon hydrogen economy could grow to become so substantial that 15% of all energy may be ultimately ‘carried’ by hydrogen by 2050. It is certainly needed to keep the world from breaching 2°C. Can Australia master the hydrogen trade? It is believed that it has a very good chance. Blessed with first-mover investment advantage, and tremendous solar and wind resourcing, Australia is already on a pathway to become a producer of green hydrogen below US$2/kg by 2030. How might it then construct a supply chain to compete in the international market with established trading partners and end users ready to renew old acquaintances? Its route is assessed to mastery of the hydrogen trade, analyse critical competitors for end use and compare costs with other exporters of hydrogen.


The Death of Industrial Civilization explains how the contemporary ecological crisis within industrial society is caused by the values inherent in unlimited economic growth and competitive materialism. It demonstrates the central role and importance of electricity, and what policy makers need to do in order to ensure that current and future systems remain reliable even as they are transformed by the rise of clean energy technologies. The novel COVID19 pandemic has created an unprecedented global health and economic crisis. The result of such a scenario is that energy demand contracts by 6%, the largest in 70 years in percentage terms and the largest ever in absolute terms. The impact of Covid19 on energy demand in 2020 would be more than seven times larger than the impact of the 2008 financial crisis on global energy demand and this is what the Olduvai theory is defined by e=energy production/population. It states that the life expectancy of Industrial Civilization is less than or equal to 100 years.


Author(s):  
Andrei Mircea Bolboaca

Covering the energy demands under environmental protection and satisfying economic and social restrictions, together with decreasing polluting emissions, are impetuous necessities, considering that over half of the pollutant emissions released in the environment are the effect of the processes of electricity and heat production from the classic thermoelectric powerplant. Increasing energy efficiency and intensifying the use of alternative resources are key objectives of global policy. In this context, a range of new energy technologies has been developed, based on alternative energy conversion systems, which have recently been used more and more often for the simultaneous production of electricity and heat. An intensification of the use of combined energy production correlated with the tendency towards the use of clean energy resources can be helpful in achieving the global objectives of increasing fuel diversity and ensuring energy demand. The chapter aims at describing the fuel cell technology, in particular those of the SOFC type, used in the CHP for stationary applications.


Mathematics ◽  
2020 ◽  
Vol 8 (12) ◽  
pp. 2182
Author(s):  
Maria Simona Raboaca ◽  
Nicu Bizon ◽  
Catalin Trufin ◽  
Florentina Magda Enescu

Since ancient times, agriculture has been one of the most important resources of national development. At a national level, clean energy is a strategic objective of Romania, in accordance with the EC directive 2016/30.11.2016 (“Clean Energy for All”). At a European level, the European Commission published in January 2019 the “Towards a Sustainable Europe by 2030” strategy, highlighting the strategic importance of the Internet of Things (IoT) and blockchain technologies. In this context, the synergy between the energy management of a hybrid energy system and blockchain technology, applied to farmers’ associations, represents a priority research direction in the field of information and communication technology, blockchain, and security. This paper presents the integration of the management of the energy produced by photovoltaic panels owned by farmers’ association, to support the variable energy demand (necessary for water pumps, charging stations of the electric agricultural machines, the animal farms, and the auxiliary equipment) based on the IoT, DLT, blockchain technologies and smart contracts applied to farmers associations registered as users of the SmartFarm platform.


Sign in / Sign up

Export Citation Format

Share Document