Transition between thermal and chemical effect of hydrogen assisted n-butane fuel catalytic ignition over Pt catalyst

Fuel ◽  
2020 ◽  
Vol 276 ◽  
pp. 118053
Author(s):  
Pengfei Xiong ◽  
Beijing Zhong ◽  
Dong Zheng ◽  
Shunhua Yang ◽  
Xin Zhou
Keyword(s):  
Chemical Effect ◽  
Pt Catalyst ◽  
Catalytic Ignition

Machine Learning for Acute Toxicity Prediction Using High-Throughput Enzyme-Reaction Chip

2019 ◽  
Author(s):  
Qiannan Duan ◽  
Jianchao Lee ◽  
Jinhong Gao ◽  
Jiayuan Chen ◽  
Yachao Lian ◽  
...  
Keyword(s):  
Machine Learning ◽  
Acute Toxicity ◽  
Model Building ◽  
Low Cost ◽  
Enzyme Reaction ◽  
Chemical Effect ◽  
Technological Innovations ◽  
Acute Toxicity Test ◽  
Toxicity Prediction ◽  
Traditional Understanding

<p>Machine learning (ML) has brought significant technological innovations in many fields, but it has not been widely embraced by most researchers of natural sciences to date. Traditional understanding and promotion of chemical analysis cannot meet the definition and requirement of big data for running of ML. Over the years, we focused on building a more versatile and low-cost approach to the acquisition of copious amounts of data containing in a chemical reaction. The generated data meet exclusively the thirst of ML when swimming in the vast space of chemical effect. As proof in this study, we carried out a case for acute toxicity test throughout the whole routine, from model building, chip preparation, data collection, and ML training. Such a strategy will probably play an important role in connecting ML with much research in natural science in the future.</p>

Dehydrogenation of Bicyclohexyl on a Pt-Catalyst on the Basis of Oxidized Carbon Nanotubes

2018 ◽  
Vol 482 (1) ◽  
pp. 52-55
Author(s):  
A. Kalenchuk ◽  
◽  
S. Chernyak ◽  
V. Bogdan ◽  
V. Lunin ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Pt Catalyst ◽  
Oxidized Carbon ◽  
Oxidized Carbon Nanotubes

Investigation of nitrite pathways in sugar beet extraction

2014 ◽  
pp. 626-635 ◽  
Author(s):  
Florian Emerstorfer ◽  
Christer Bergwall ◽  
Walter Hein ◽  
Mats Bengtsson ◽  
John P. Jensen
Keyword(s):  
Sugar Beet ◽  
Laboratory Experiments ◽  
Ph Value ◽  
Full Scale ◽  
Chemical Effect ◽  
Spectrophotometric Detection ◽  
Sugar Factory ◽  
Chemical Effects ◽  
Set Up ◽  
Nitrate And Nitrite

The investigations presented in this work were carried out in order to further deepen the knowledge about nitrite pathways in the area of sugar beet extraction. The article consists of two parts with different experimental set-up: the first part focuses on laboratory trials in which the fate of nitrate and nitrite was studied in a so-called mini-fermenter. These trials were carried out using juice from the hot part of the cossette mixer of an Agrana sugar factory in Austria. In the experiments, two common sugar factory disinfectants were used in order to study microbial as well as microbial-chemical effects on nitrite formation and degradation caused by bacteria present in the juice. The trials demonstrated that the direct microbial effect (denitrification) on nitrite degradation is more pronounced than the indirect microbial-chemical effect coming from pH value decrease by these bacteria and subsequent nitrite loss. The second part describes the findings from laboratory experiments and full scale factory trials using a mobile laboratory set-up based on insulated stainless steel containers and spectrophotometric detection of nitrite in various factory juices. The trials were made at two Nordzucker factories located in Finland (factory A) and Sweden (factory B). The inhibiting effect of the two common sugar factory disinfectants on nitrite formation was evaluated in laboratory trials, whereas the full scale trials focused on one disinfectant. Other trials to evaluate potential contamination sources of thermophilic nitrite producing bacteria to the extraction system, reactivation of nitrite producing bacteria in raw juice and the effect of a pH gradient on bacterial nitrite activity in cossette mixer juice are also reported.

The Chemical Effect in Medicine Interaction Determining the Form and Speed of Psychical Involution in the Prosthetic Restauration in the Edentulous

2018 ◽  
Vol 69 (8) ◽  
pp. 2306-2310
Author(s):  
Aureliana Caraiane ◽  
Razvan Leata ◽  
Veronica Toba ◽  
Doina Vesa ◽  
Luana Andreea Macovei ◽  
...  
Keyword(s):  
Practical Importance ◽  
Psychosocial Problems ◽  
Well Being ◽  
The Elderly ◽  
Chemical Effect ◽  
Special Importance ◽  
Dramatic Form ◽  
Specific Disorders ◽  
The Individual ◽  
Made In

The progress made in dentistry during the latest decades is due, conceptually, to the new, systemic vision of man, which has also taken place in this field of medicine. In this context, the link between organic and psychic is indestructible. Thus illness is understood as a drama in which the somatic process has a psychic value, and the mental one has a body value. It is known that the morphological and functional integrity of the dental system, health and vigorousness, gives the individual a state of well-being that affects his somatic and psychic health, as any disturbance at this level entails repercussions in psychological and social behavior. Such a disruption is the total edification that seriously alters not only the dental system but the whole organism, putting various biological and psychosocial problems to the practitioner. The total expression represents not only a physical disability but also a psychological one. A special importance in studying psychological changes at total edentulous presents the psychological aspects of senile involution. This is not only a theoretical but also a practical importance due to the increase in the number of elderly people. Through the researches of the present paper we intend to present the reality of the psychological manifestations in the total edentation, which is objectified on different methods of psychodiagnosis in the first part, in order for the second part to be addressed to problems of prosthetic psychotherapy.The study comprises a group of 43 patients, of whom 24 were men and 19 women with total uni or bimaxilar edentation. Total edentation can be and is responsible for somatopsychic alterations, along with other pathogens, general, local, social, which sometimes can take a dramatic form, converting, where the area is also favorable, a pure somatic disease, for those who are not in psychopathy or even psychosis, although these latter cases are extremely rare and especially in youngsters, which would disrupt not only the person�s behavior as an individual, but also their status, function and social integrity. The treatment of dental and psychological complex is mandatory for any patient, but especially for the elderly, where recovery is more difficult, with disease-specific disorders adding to those of senescence.

Peculiarities of high-pressure hydrogen adsorption on Pt catalyzed Cu-BTC metal–organic framework

2021 ◽  
Vol 23 (7) ◽  
pp. 4277-4286
Author(s):  
S. V. Chuvikov ◽  
E. A. Berdonosova ◽  
A. Krautsou ◽  
J. V. Kostina ◽  
V. V. Minin ◽  
...  
Keyword(s):  
High Pressure ◽  
High Pressures ◽  
Hydrogen Adsorption ◽  
Metal Organic Framework ◽  
Pt Catalyst ◽  
Metal Organic ◽  
Pt Catalyzed ◽  
Pressure Hydrogen ◽  
Organic Framework

Pt-Catalyst plays a key role in hydrogen adsorption by Cu-BTC at high pressures.

scholarly journals High-throughput computational-experimental screening protocol for the discovery of bimetallic catalysts

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Byung Chul Yeo ◽  
Hyunji Nam ◽  
Hyobin Nam ◽  
Min-Cheol Kim ◽  
Hong Woo Lee ◽  
...  
Keyword(s):  
High Throughput ◽  
Bimetallic Catalysts ◽  
High Throughput Screening ◽  
Direct Synthesis ◽  
Catalytic Performance ◽  
Platinum Group Metals ◽  
Pt Catalyst ◽  
Electronic Density ◽  
Bimetallic Alloy ◽  
Screening Protocol

AbstractTo accelerate the discovery of materials through computations and experiments, a well-established protocol closely bridging these methods is required. We introduce a high-throughput screening protocol for the discovery of bimetallic catalysts that replace palladium (Pd), where the similarities in the electronic density of states patterns were employed as a screening descriptor. Using first-principles calculations, we screened 4350 bimetallic alloy structures and proposed eight candidates expected to have catalytic performance comparable to that of Pd. Our experiments demonstrate that four bimetallic catalysts indeed exhibit catalytic properties comparable to those of Pd. Moreover, we discover a bimetallic (Ni-Pt) catalyst that has not yet been reported for H2O2 direct synthesis. In particular, Ni61Pt39 outperforms the prototypical Pd catalyst for the chemical reaction and exhibits a 9.5-fold enhancement in cost-normalized productivity. This protocol provides an opportunity for the catalyst discovery for the replacement or reduction in the use of the platinum-group metals.

scholarly journals Degradation Investigation of Electrocatalyst in Proton Exchange Membrane Fuel Cell at a High Energy Efficiency

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3932
Author(s):  
Jie Song ◽  
Qing Ye ◽  
Kun Wang ◽  
Zhiyuan Guo ◽  
Meiling Dou
Keyword(s):  
Energy Efficiency ◽  
Single Cell ◽  
Proton Exchange Membrane ◽  
Cell Voltage ◽  
High Energy ◽  
Proton Exchange ◽  
Pt Catalyst ◽  
Operation Conditions ◽  
High Efficient ◽  
Exchange Membrane

The development of high efficient stacks is critical for the wide spread application of proton exchange membrane fuel cells (PEMFCs) in transportation and stationary power plant. Currently, the favorable operation conditions of PEMFCs are with single cell voltage between 0.65 and 0.7 V, corresponding to energy efficiency lower than 57%. For the long term, PEMFCs need to be operated at higher voltage to increase the energy efficiency and thus promote the fuel economy for transportation and stationary applications. Herein, PEMFC single cell was investigated to demonstrate its capability to working with voltage and energy efficiency higher than 0.8 V and 65%, respectively. It was demonstrated that the PEMFC encountered a significant performance degradation after the 64 h operation. The cell voltage declined by more than 13% at the current density of 1000 mA cm−2, due to the electrode de-activation. The high operation potential of the cathode leads to the corrosion of carbon support and then causes the detachment of Pt nanoparticles, resulting in significant Pt agglomeration. The catalytic surface area of cathode Pt is thus reduced for oxygen reduction and the cell performance decreased. Therefore, electrochemically stable Pt catalyst is highly desirable for efficient PEMFCs operated under cell voltage higher than 0.8 V.

Rapid bleaching of photoelectrochromic device by the simple addition of Pt catalyst in WO3 layer

2021 ◽  
Vol 224 ◽  
pp. 110990
Author(s):  
Saad Sarwar ◽  
Sunghyeok Park ◽  
Thuy Thi Dao ◽  
Sungjun Hong ◽  
Chi-Hwan Han
Keyword(s):  
Pt Catalyst ◽  
Simple Addition

scholarly journals Action Time-Effect and Mechanism of Low-Calcium Fly Ash in Cement-Based Composites

Crystals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 681
Author(s):  
Na Yan ◽  
Qingqing Tang ◽  
Ying Zhang ◽  
Guowen Sun
Keyword(s):  
Fly Ash ◽  
Nitrogen Adsorption ◽  
Chemical Effect ◽  
Hydration Products ◽  
X Ray Diffraction ◽  
Degree Of Hydration ◽  
Surface Areas ◽  
Activity Effect ◽  
Low Calcium ◽  
Pore Size Distributions

This study was conducted in order to investigate when low-calcium fly ash plays a physical or chemical effect and what is the chemical effect proportion of low-calcium fly ash. Two types of low-calcium fly ash and quartz powder, with similar fineness as active and inert admixtures, were used as materials in this study. Under different water/binder ratios and hydration ages, the effects of the different types of admixtures and their dosages on the flexural and compressive strength of the composites were studied. X-ray diffraction (XRD), scanning electron microscopy (SEM) and nitrogen adsorption methods, in addition to an assessment of the degree of hydration of the fly ash, were employed to observe the hydration products at different ages, the microstructures of the hydration products, as well as their surface areas and pore size distributions. The results show that during the hydration period of 28 days, the low-calcium fly ash has a micro-aggregate filling physical effect. However, after 56 days, the hydration degree of fly ash begins to exceed 1%. This illustrates that the low-calcium fly ash has both the pozzolanic activity effect and micro-aggregate filling effect. In contrast, the low-calcium fly ash hydrated for 90 days is still dominated by the physical filling effect.

Sign in / Sign up

Export Citation Format

Share Document