scholarly journals Extraction and Physicochemical Characteristics of High Pressure-assisted Cold Brew Coffee

Future Foods ◽  
2022 ◽  
pp. 100113
Author(s):  
Liguo Zhang ◽  
Xiuju Wang ◽  
Annamalai Manickavasagan ◽  
Loong-Tak Lim
Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1802
Author(s):  
Bartosz Kruszewski ◽  
Katarzyna Zawada ◽  
Piotr Karpiński

High-pressure homogenization (HPH) is one of the food-processing methods being tested for use in food preservation as an alternative to pasteurization. The effects of the HPH process on food can vary depending on the process parameters used and product characteristics. The study aimed to investigate the effect of pressure, the number of passes, and the inlet temperature of HPH processing on the quality of cloudy blackcurrant juice as an example of food rich in bioactive compounds. For this purpose, the HPH treatment (pressure of 50, 150, and 220 MPa; one, three, and five passes; inlet temperature at 4 and 20 °C) and the pasteurization of the juice were performed. Titratable acidity, pH, turbidity, anthocyanin, vitamin C, and total phenolics content, as well as colour, and antioxidant activity were measured. Heat treatment significantly decreased the quality of the juice. For processing of the juice, the best were the combinations of the following: one pass, the inlet temperature of 4 °C, any of the used pressures (50, 150, and 220 MPa); and one pass, the inlet temperature of 20 °C, and the pressure of 150 MPa. Vitamin C and anthocyanin degradation have been reported during the HPH. The multiple passes of the juice through the machine were only beneficial in increasing the antioxidant capacity but negatively affected the colour stability.


2015 ◽  
Vol 131 ◽  
pp. 432-438 ◽  
Author(s):  
Wenhao Li ◽  
Hongmei Guo ◽  
Peng Wang ◽  
Xiaoling Tian ◽  
Wei Zhang ◽  
...  

2016 ◽  
Vol 22 (8) ◽  
pp. 708-719 ◽  
Author(s):  
Ascensión Martínez-Sánchez ◽  
Martha Patricia Tarazona-Díaz ◽  
Antonio García-González ◽  
Perla A Gómez ◽  
Encarna Aguayo

There is a growing demand for food supplements containing high amounts of vitamins, phenolic compounds and mineral content that provide health benefits. Those functional compounds have different solubility properties, and the maintenance of their compounds and the guarantee of their homogenic properties need the application of novel technologies. The quality of different drinkable functional foods after thermal processing (0.1 MPa) or high-pressure homogenization under two different conditions (80 MPa, 33 ℃ and 120 MPa, 43 ℃) was studied. Physicochemical characteristics and sensory qualities were evaluated throughout the six months of accelerated storage at 40 ℃ and 75% relative humidity (RH). Aroma and color were better maintained in high-pressure homogenization-treated samples than the thermally treated ones, which contributed significantly to extending their shelf life. The small particle size obtained after high-pressure homogenization treatments caused differences in turbidity and viscosity with respect to heat-treated samples. The use of high-pressure homogenization, more specifically, 120 MPa, provided active ingredient homogeneity to ensure uniform content in functional food supplements. Although the effect of high-pressure homogenization can be affected by the food matrix, high-pressure homogenization can be implemented as an alternative to conventional heat treatments in a commercial setting within the functional food supplement or pharmaceutical industry.


Meat Science ◽  
2017 ◽  
Vol 131 ◽  
pp. 40-47 ◽  
Author(s):  
Nerea Martínez-Onandi ◽  
Ana Rivas-Cañedo ◽  
Marta Ávila ◽  
Sonia Garde ◽  
Manuel Nuñez ◽  
...  

2005 ◽  
Vol 11 (6) ◽  
pp. 477-484 ◽  
Author(s):  
M. Pérez-Won ◽  
G. Tabilo-Munizaga ◽  
G. V. Barbosa-Cánovas

The aim of this study was to evaluate the effects of ultra high pressure (UHP) on the adductor muscles of bay scallops ( Aequipecten irradians) pertaining to certain physicochemical characteristics and microstructure. UHP treatment was applied at 200MPa and 400MPa, each application with one pulse and a holding time of 10min, or 2 pulses and a holding time of 5min per pulse, in a continuous or oscillation mode. Determination of textural parameters and L*, a* and b* colour parameters were carried out and compared with untreated scallops. Microstructure was observed using a scanning electronic microscopy (SEM) technique and, for microbial analyses, a total plate count was performed. SEM showed that UHP treatments induced a size reduction of the honeycomb structure of myofibres, giving a more compact appearance to the structure. Colour and compressibility enhanced by pressure treatment, however loss of hardness was observed. UHP treatments also reduced the initial load in total plate count of microorganisms to 10cfu/g. UHP is a competitive technology in food processing and ready for use on this high-priced seafood product.


LWT ◽  
2018 ◽  
Vol 92 ◽  
pp. 108-115 ◽  
Author(s):  
Daniela Rodarte ◽  
Anna Zamora ◽  
Antonio-José Trujillo ◽  
Bibiana Juan

1997 ◽  
Vol 59 (3) ◽  
pp. 439-447 ◽  
Author(s):  
F. Gaucheron ◽  
M.H. Famelart ◽  
F. Mariette ◽  
K. Raulot ◽  
F. Michela ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document