scholarly journals A comparative study of finite element analysis of single-particle impact on mild steel with and without strain rate considered

2021 ◽  
pp. 104029
Author(s):  
Lei Xiao ◽  
Xiaozhuo Xu ◽  
Hao Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Comparative Study ◽  
Mild Steel ◽  
Strain Rate ◽  
Single Particle ◽  
Particle Impact ◽  
Element Analysis ◽  
Single Particle Impact

scholarly journals Simulasi Pembebanan Komponen Bender pada Desain Mesin Begel Fabricator Menggunakan Software Autodesk Inventor 2020

2021 ◽  
Vol 2 (2) ◽  
pp. 93-97
Author(s):  
Satriawan Dini Hariyanto ◽  
Wikan Kurniawan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cast Iron ◽  
Mild Steel ◽  
Modulus Of Elasticity ◽  
Material Parameter ◽  
Element Analysis ◽  
Material Parameters ◽  
Constituent Material ◽  
Loading Parameter

Stress analysis of the bender components in the design of the begel fabricator machine was carried out using FEA (Finite Element Analysis) with three variations of the constituent material parameters, namely 6061 aluminum, mild steel, and cast iron with a modulus of elasticity of 68.9 GPa, 220 GPa, 120.5 GPa, respectively. The test is carried out by a loading parameter 2520 MPa and fixed constraint. The maximum von misses stress and displacement obtained for each material parameter components using aluminum, mild steel, and cast iron are 17.78 MPa; 0.00765, 17.49 MPa; 0.00229, 17.62 MPa; 0.00427 respectively.

scholarly journals Finite element analysis of mild steel - rubber sandwich composite material

2018 ◽  
Vol 376 ◽  
pp. 012040 ◽  
Author(s):  
Y P Ravitej ◽  
V Swaroop ◽  
S Ramesh ◽  
H Adarsha ◽  
Veerachari ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Composite Material ◽  
Mild Steel ◽  
Sandwich Composite ◽  
Element Analysis

Effect of temperature and punch speed on forming limit strains of AA5182 alloy in warm forming and improvement in failure prediction in finite element analysis

2017 ◽  
Vol 52 (4) ◽  
pp. 258-273 ◽  
Author(s):  
D Raja Satish ◽  
D Ravi Kumar ◽  
Marion Merklein
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Strain Rate ◽  
Deep Drawing ◽  
Failure Prediction ◽  
Forming Limit ◽  
Element Analysis ◽  
Working Temperature ◽  
Warm Working ◽  
Punch Speed

Formability of AA5182-O aluminum alloy sheets in the warm working temperature range has been studied. Forming limit strains of sheets of two different thicknesses have been determined experimentally in different modes of deformation (biaxial tension, plane strain and tension–compression) by varying temperature and punch speed. A correlation has been established for plane strain intercept of the forming limit diagram (FLD0) with temperature, punch speed and thickness from the experimental results. This correlation has been used to plot the forming limit diagrams for failure prediction in the finite element analysis of warm deep drawing of cylindrical cups. The effect of strain and strain rate on material flow behavior has been incorporated using a strain rate–sensitive power hardening law in which the strain hardening exponent and strain rate sensitivity index have been experimentally determined. The predictions from simulations have been validated by warm deep drawing experiments. Large improvement in accuracy of failure prediction has been observed using the FLDs plotted based on the developed correlation when compared to the existing method of calculating FLD0 using only strain hardening coefficient and thickness. The results clearly indicate the importance of incorporating temperature and punch speed in failure prediction of Al alloys using FLDs in the warm working temperature range.

Influence of temperature and strain rate on the longitudinal compressive crashworthiness of 3D braided composite tubes and finite element analysis

2016 ◽  
Vol 26 (7) ◽  
pp. 1003-1027 ◽  
Author(s):  
Xianyan Wu ◽  
Qian Zhang ◽  
Bohong Gu ◽  
Baozhong Sun
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Strain Rate ◽  
Coupling Effect ◽  
Three Dimensional ◽  
Composite Tubes ◽  
Element Analysis ◽  
Impact Compression ◽  
Mechanical Coupling ◽  
The Impact

This article reports the longitudinal compressive crashworthiness of three-dimensional four-step circular braided carbon/epoxy composite tubes at temperatures of 23, −50, and −100℃ under strain rate ranging from 340 to 760/s both experimentally and finite element analysis. The experimental results showed that the compression strength, stiffness, and specific energy absorption increased with the decrease in temperature and with the increase in strain rate. It also showed that, the compressive damage morphologies were sensitive to the change in temperature and strain rate. A coupled thermal-mechanical numerical analysis was conducted to find the thermo/mechanical coupling effect on the compressive crashworthiness of the three-dimensional composite tube. The temperature distributions in the braided preform and the resin during the impact compression were also calculated through finite element analysis. From the finite element analysis results, the inelastic heat generation was seen to be more in the preform than the matrix and its distribution and accumulation led to the damage progress along the loading direction.

Sign in / Sign up

Export Citation Format

Share Document