An innovative approach to thin coal seam mining of complex geological conditions by pressure regulation

Author(s):  
Tongbin Zhao ◽  
Zhenyu Zhang ◽  
Yunliang Tan ◽  
Chengzhong Shi ◽  
Ping Wei ◽  
...  
2020 ◽  
Vol 13 (2) ◽  
pp. 99-108
Author(s):  
Yanxiang Wang ◽  
Daolong Yang ◽  
Bangsheng Xing ◽  
Tingting Zhao ◽  
Zhiyi Sun ◽  
...  

Background:: China's thin and extremely thin coal seam resources are widely distributed and rich in reserves. These coal seams account for 20% of the recoverable reserves, with 9.83 billion tons of industrial reserves and 6.15 billion tons of recoverable reserves. Objective: Due to the complex geological conditions of the thin coal seam, the plow mining method cannot be effectively popularized, and the drum mining method is difficult to be popularized and applied in small and medium-sized coal mines, so it is necessary to find other more advantageous alternative mining methods. Methods: The equipment integrates mining operations, conveying operations, and supporting operations, and is suitable for mining short and extremely thin coal seam with a height of 0.35m-0.8m and width of 2m-20m. It has the advantages of the low body of the shearer, no additional support on the working face, and small underground space. The mining efficiency of thin coal seam and very thin coal seam can be improved and the mining cost can be reduced. Results: Thin coal seam shear mining combines mining, conveying, and supporting processes together and has the advantages of a low fuselage, no extra support required for the working face, and feasibility in a small underground space. Conclusion: The summarized mining method can improve the mining efficiency of thin and extremely thin coal seams, reduce mining costs, and incorporate green mining practices, which take both mining economy and safety into account.


2013 ◽  
Vol 295-298 ◽  
pp. 2980-2984
Author(s):  
Xiang Qian Wang ◽  
Da Fa Yin ◽  
Zhao Ning Gao ◽  
Qi Feng Zhao

Based on the geological conditions of 6# coal seam and 8# coal seam in Xieqiao Coal Mine, to determine reasonable entry layout of lower seam in multi-seam mining, alternate internal entry layout, alternate exterior entry layout and overlapping entry layout were put forward and simulated by FLAC3D. Then stress distribution and displacement characteristics of surrounding rock were analyzed in the three ways of entry layout, leading to the conclusion that alternate internal entry layout is a better choice for multi-seam mining, for which makes the entry located in stress reduce zone and reduces the influence of abutment pressure of upper coal seam mining to a certain extent,. And the mining practice of Xieqiao Coal Mine tested the results, which will offer a beneficial reference for entry layout with similar geological conditions in multi-seam mining.


2012 ◽  
Vol 629 ◽  
pp. 937-942
Author(s):  
Dong Sheng Zhang ◽  
Xu Feng Wang ◽  
Yang Zhang ◽  
Jin Liang Wang

Aimed at the specific geological conditions of 7# thin coal seam in Liuquan Mine, this paper used the methods of numerical calculation and theoretical analysis to determine the reasonable technological parameters of high-grade conventional mining face. The numerical simulation software of UDEC (Universal Distinct Element Code) was used to contrast and analyse the characteristics of surrounding rock stress distribution and overlying rock horizontal displacement under the condition of different length of coalface, then it was indicated that the surrounding rock deformation was less when length of coalface was 110 m which was advantageous for roof control; according to the conditions of roof and floor, the roof support strength was being calculated systematically to determine the row space of props being 700×1200 mm; the main equipments of coalface was assorted, and reasonable work manner in coalface and gob processing measure was put forward, which provided guidance for efficient mining in thin coal seam.


2013 ◽  
Vol 397-400 ◽  
pp. 154-156
Author(s):  
De Yu Xie ◽  
Xue Yi Zhao ◽  
An Qi Li

Now thin coal seam mining technology and equipment falls behind and the researches on hydraulic support is not enough, this paper introduces the structure and design characteristics of hydraulic support of thin coal seamm, systematically describes the automatic control function, and establishes simple planar models of thin coal hydraulic support. Successful application of the support provides methods and experiences for design and manufacture of thin coal seam hydraulic support.


2013 ◽  
Vol 295-298 ◽  
pp. 2918-2923 ◽  
Author(s):  
Li Ming Zhang

Degree of mechanization of extremely thin coal seam mining is growing, with introducing the main mining method currently used by the different inclination of the extremely thin coal seams in China, focusing on the different mining technology and related ancillary mining equipment development status and existing problems, and discuss the extremely thin coal seam in the future to realize the remote control, automatic monitoring and unmanned mining development trend.


2012 ◽  
Vol 616-618 ◽  
pp. 402-405 ◽  
Author(s):  
Hong Chun Xia ◽  
Guo Sheng Gao ◽  
Bin Yu

According to the specific geological conditions in themulti-layer worked-out areas of Yongding coal seam, by the methods of integration of theoretic analysis, numerical value calculation and so on, we studied movement law of Overlaying Strata and influence of coal pillar in Coal seam mining, obtained the basic law of the overlying strata movement in multiplayer, provides a theoretical basis for the safe and efficient exploitation of the success of multiplayer. Many mining area in China is mining of closed distance coal seam group, By the impact of coal seam in the overlying, face and the tunnel roof structure will be different injury in sub-coal seam mining, Roof structure has changed greatly, even damage and easily take the roof leakage, When the the goaf communication with the overlying coal seams, caused by the induced secondary disasters such as face air leakage, Therefore, exploitation of the law of motion of the overlying strata in the multiplayer is a pressing problem. Exploitation multiplayer seam few theoretical and technical foundation at home and abroad, affecting the validity of the mining, rationality. although a lot of research on theory and technology of coal mining over the years[1~5], But it was not able to an overall comprehensive analysis of upper goaf adjacent goaf and overlying the coal pillar and present mining face, create a dynamic structural mechanics model, which is likely to cause the occurrence of disasters.


2020 ◽  
Vol 10 (8) ◽  
pp. 2874
Author(s):  
Xugang Lian ◽  
Yanjun Zhang ◽  
Hongyan Yuan ◽  
Chenlong Wang ◽  
Junting Guo ◽  
...  

The surface discontinuous deformation caused by coal mining has great damage to the ecological environment and threatens the safety of human lives. Focusing on the problem of discontinuous deformation (ground fissures and collapsed pits) in mining areas with a thick loess and thin bedrock, this paper uses a coal panel in southern Shanxi in China as research background, and uses field investigation, theoretical analysis and the particle flow code 2D (PFC2D) numerical simulation method to study the movement of overburden and discontinuous ground deformation of mining areas with a thick loess layer and a thin bedrock. The results show that with the continual advance of the working face, the failure of the overlying rock, the changing of force chain shape and the development of cracks under this geological and mining condition have their unique rules. This study analyzes the law of movement of overburden in coal seam mining, explains why discontinuous deformation of the surface occurs in case of a thick loess layer and thin bedrock, and provides reference for the prediction of fracture development under the same geological conditions and the application of the PFC2D in coal seam mining in different geological conditions.


2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Haibo Liu ◽  
Xucheng Xiao ◽  
Zhihang Shu

No. 21 coal seam is a full-thickness structured soft coal in Dengfeng coalfield. The coal seam gas-bearing capacity is high, and the permeability is poor, thus resulting in serious coal and gas outburst dynamic disasters. According to the gas geological conditions of Baoyushan Mine, No. 17 coal seam without outburst danger, which is 0.5 m thick and 23.4 m under No. 21 coal seam, was mined in advance as the lower protective seam. At the same time, a gas extraction roadway was constructed in No. 21 coal seam floor. Cross-layer boreholes were constructed to extract the pressure relief gas of No. 21 coal seam for comprehensive treatment of mine gas. The mobile deformation of the overburden coal and rock mass after mining No. 17 coal seam, the fracture development characteristics of No. 21 coal seam, the pressure relief gas migration of the coal seam, the gas extraction, and the outburst danger elimination were studied. The research findings showed the following: (1) after mining No. 17 coal seam, the overburden hard and extremely thick limestone roof sagged slowly, albeit leading to no craving zone. (2) The permeability of No. 21 coal seam was increased by about 394 times, from 0.0012 mD to 0.4732 mD. (3) After the extraction of pressure relief gas through the gas extraction roadway on the floor through the cross-layer borehole, the gas pressure of No. 21 coal seam decreased from 1.17 MPa to 0.12 MPa, while the gas content decreased from 9.74 m3/t to 3.1 m3/t, which suggested that the coal and gas outburst dynamic danger of No. 21 coal seam was totally eliminated and the goal of safe and efficient mining in the mine was realized.


Sign in / Sign up

Export Citation Format

Share Document