scholarly journals Modelling FRP-to-substrate joints using the bilinear bond-slip rule with allowance for friction—Full-range analytical solutions for long and short bonded lengths

2018 ◽  
Vol 135 ◽  
pp. 245-260 ◽  
Author(s):  
Jaroslav Vaculik ◽  
Alexander B. Sturm ◽  
Phillip Visintin ◽  
Michael C. Griffith
Buildings ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 398
Author(s):  
Yong Yao ◽  
Hui Zhang ◽  
Xin Zhang ◽  
Feifan Ren ◽  
Yaqi Li ◽  
...  

A systematic investigation of the effects of silane coatings on steel fibre–mortar interfacial bond properties was conducted, combining pullout tests, analytical solutions, and meso-scale FE simulations. Nine silane coatings were tested, and their effects were evaluated by 30 single fibre pullout tests. They were found to increase the peak force and energy consumption up to 5.75 times and 2.48 times, respectively. Closed-form analytical solutions for pullout load, displacement, and interfacial stress distribution during the whole pullout process were derived based on a tri-linear bond-slip model, whose parameters were calibrated against the pullout tests. Finally, the calibrated bond-slip models were used to simulate the pullout tests and complex failure of multi-fibre specimens in mesoscale finite element models. Such an approach of combining pullout tests, analytical solutions, and mesoscale modelling provides a reliable way to investigate the effects of fibre–mortar interfacial properties on the mechanical behaviour of steel fibre reinforced concrete members in terms of structural strength, stiffness, ductility, and failure mechanisms.


2016 ◽  
Vol 2016 ◽  
pp. 1-13 ◽  
Author(s):  
Jun Han ◽  
Hong Yuan

Bonded joints are very common in many pipeline systems, in which the bond behavior of the joint interface is of crucial importance. This paper presents two analytical solutions for the debonding process of a pipe joint under torsion, assuming that the bond interface follows either an exponential softening bond-slip law or a simplified bilinear model. The solutions are general, applicable to composites and metallic and indeed other pipes. Based on the analytical solutions, the influences of the bond length and stiffness on the torque-displacement curve and ultimate load are investigated. The solutions can be used to explain the stress transfer mechanism, the interface crack propagation, and the ductility of the joint.


ASHA Leader ◽  
2013 ◽  
Vol 18 (8) ◽  
pp. 40-45 ◽  
Author(s):  
Judy Rudebusch ◽  
JoAnn Wiechmann

To offer a full range of RTI and IEP services, school-based SLPs can schedule activity blocks rather than go student by student—here's how.


2016 ◽  
Vol 1 (15) ◽  
pp. 79-83
Author(s):  
Ed Bice ◽  
Kristine E. Galek

Dysphagia is common in patients with dementia. Dysphagia occurs as a result of changes in the sensory and motor function of the swallow (Easterling, 2007). It is known that the central nervous system can undergo experience-dependent plasticity, even in those individuals with dementia (Park & Bischof, 2013). The purpose of this study was to explore whether or not the use of neuroplastic principles would improve the swallow motor plan and produce positive outcomes of a patient in severe cognitive decline. The disordered swallow motor plan was manipulated by focusing on a neuroplastic principles of frequency (repetition), velocity of movement (speed of presentation), reversibility (Use it or Lose it), specificity and adaptation, intensity (bolus size), and salience (Crary & Carnaby-Mann, 2008). After five therapeutic sessions, the patient progressed from holding solids in her mouth with decreased swallow initiation to independently consuming a regular diet with full range of liquids with no oral retention and no verbal cues.


2014 ◽  
Vol 35 (4) ◽  
pp. 236-244 ◽  
Author(s):  
Atsushi Oshio ◽  
Shingo Abe ◽  
Pino Cutrone ◽  
Samuel D. Gosling

The Ten Item Personality Inventory (TIPI; Gosling, Rentfrow, & Swann, 2003 ) is a widely used very brief measure of the Big Five personality dimensions. Oshio, Abe, and Cutrone (2012) have developed a Japanese version of the TIPI (TIPI-J), which demonstrated acceptable levels of reliability and validity. Until now, all studies examining the validity of the TIPI-J have been conducted in the Japanese language; this reliance on a single language raises concerns about the instrument’s content validity because the instrument could demonstrate reliability (e.g., retest) and some forms of validity (e.g., convergent) but still not capture the full range of the dimensions as originally conceptualized in English. Therefore, to test the content validity of the Japanese TIPI with respect to the original Big Five formulation, we examine the convergence between scores on the TIPI-J and scores on the English-language Big Five Inventory (i.e., the BFI-E), an instrument specifically designed to optimize Big Five content coverage. Two-hundred and twenty-eight Japanese undergraduate students, who were all learning English, completed the two instruments. The results of correlation analyses and structural equation modeling demonstrate the theorized congruence between the TIPI-J and the BFI-E, supporting the content validity of the TIPI-J.


Author(s):  
Raphael A. Cadenhead

Although the reception of the Eastern father Gregory of Nyssa has varied over the centuries, the past few decades have witnessed a profound awakening of interest in his thought, particularly in relation to the contentious issues of gender, sex, and sexuality. The Body and Desire sets out to retrieve the full range of Gregory’s thinking on the challenges of the ascetic life through a diachronic analysis of his oeuvre. Exploring his understanding of the importance of bodily and spiritual maturation in the practices of contemplation and virtue, Raphael Cadenhead recovers the vital relevance of this vision of transformation for contemporary ethical discourse.


Sign in / Sign up

Export Citation Format

Share Document