A fibre-based 2D-slit homogenizer concept for high-precision space-based spectrometer missions

The measurement accuracy of recent and future space-based imaging spectrometers with a high spectral and spatial resolution suffer from the inhomogeneity of the radiances of the observed Earth scene. The Instrument Spectral Response Function (ISRF) is distorted due to the inhomogeneous illumination from scene heterogeneity. This gives rise to a pseudo-random error on the measured spectra. In order to assess the spectral stability of the spectrograph, stringent requirements are typically defined on the ISRF such as shape knowledge and the stability of the centroid position of the spectral sample. The high level of spectral accuracy is particularly crucial for missions quantifying small variations in the total column of well-mixed trace gases like $$\hbox {CO}_{2}$$ CO 2 . In the framework of the $$\hbox {CO}_{2}$$ CO 2 Monitoring Mission (CO2M) industrial feasibility study (Phase A/B1 study), we investigated a new slit design called 2D-Slit Homogenizer (2DSH). This new concept aims to reduce the Earth scene contrast entering the instrument. The 2DSH is based on optical fibre waveguides assembled in a bundle, which scramble the light in across-track (ACT) and along-track (ALT) direction. A single fibre core dimension in ALT defines the spectral extent of the slit and the dimension in ACT represents the spatial sample of the instrument. The full swath is given by the total size of the adjoined fibres in ACT direction. In this work, we provide experimental measurement data on the stability of representative rectangular core shaped fibre as well as a preliminary pre-development of a 2DSH fibre bundle. In our study, the slit concept has demonstrated significant performance gains in the stability of the ISRF for several extreme high-contrast Earth scenes, achieving a shape stability of $$<0.5{\%}$$ < 0.5 % and a centroid stability of $$<0.25 \ \text {pm}$$ < 0.25 pm (NIR). Given this unprecedented ISRF stabilization, we conclude that the 2DSH concept efficiently desensitizes the instrument for radiometric and spectral errors with respect to the heterogeneity of the Earth scene radiance.

Fibre failure assessment in carbon fibre reinforced polymers under tensile loading using in situ synchrotron X-ray computed tomography

In situ synchrotron radiation computed tomography (SRCT) was used to compare the fibre damage progression in five configurations of (902/02)s carbon-epoxy coupons loaded to failure. The effects of different sizing types, surface treatments and fibre diameters on the macroscopic properties, for example, ultimate tensile strength (UTS), and on the damage accumulation at a microscopic scale, for example, fibre break accumulation, were assessed. A semi-automated approach was adopted to process the large amount of data obtained from the SRCT scans and further method applicability areas can be envisaged. Single fibre break accumulation was seen to be influenced by the fibre type, while the formation of interacting fibre break groups by the surface treatment and the sizing type. For the materials presented, it can be suggested that an increased defect tolerance can be obtained by moving from stronger to weaker fibre-matrix adhesion, with sub-critical multiplet behaviour emerging as independent of the average UTS value.

Micromechanical Tests on Natural Fibre Composites with Enzymatically Enhanced Fibre–Matrix Adhesion

Natural fibre–reinforced composites are more sustainable than other composites with respect to the raw materials. Their properties are attractive due to high specific properties, and especially so wherever high damping is valued. As the interphase between fibre and matrix is the region of highest stresses, a strong bond between fibre and matrix is essential for any composites’ properties. The present study compares two methods of determining the interfacial shear stress in natural fibre–reinforced composites: the single fibre fragmentation test and the single fibre pullout test. The studied composites are flax fibre reinforced epoxy. For a variety of fibre–matrix interaction, the fibres are treated with a laccase enzyme and dopamine, which is known to improve the fibre–matrix shear strength. In the observed samples, single fibre fragmentation test data, i.e. of fracture mode and fragment length, scatter when compared to pullout data. In single fibre pullout tests, the local interfacial shear strength showed a 30% increase in the laccase-treated samples, compared to the control samples. The method also permitted an evaluation of the frictional stress occurring after surface failure.

Simulations of the Behaviour of Steel Ferromagnetic Fibres Commonly Used in Concrete in a Magnetic Field

The efficiency of fibre reinforcement in concrete can be drastically increased by orienting the fibres using a magnetic field. This orientation occurs immediately after pouring fresh concrete when the fibres can still move. The technique is most relevant for manufacturing prefabricated elements such as beams or columns. However, the parameters of such a field are not immediately apparent, as they depend on the specific fibre reaction to the magnetic field. In this study, a numerical model was created in ANSYS Maxwell to examine the mechanical torque acting on fibres placed in a magnetic field with varying parameters. The model consists of a single fibre placed between two Helmholtz coils. The simulations were verified with an experimental setup as well as theoretical relationships. Ten different fibre types, both straight and hook-ended, were examined. The developed model can be successfully used to study the behaviour of fibres in a magnetic field. The fibre size plays the most important role together with the magnetic saturation of the fibre material. Multiple fibres show significant interactions.

Investigation of Single Fibre Tensile Properties of the Pineapple Leaf (PALF)

Recently, natural fibres composite is rigorously explored as alternative fibres due to the source depletion of petroleum. This research was focusing on pineapple leaf (PALF). The purpose of this research was to study the single fibre tensile properties of PALF. The single fibre tensile test was conducted via the universal testing machine following ASTM D3379 – 89 standards. The result shows that the Ultimate Tensile Strength (UTS) and Young’s Modulus of PALF were 141.093 MPa and 89.073 MPa, respectively. This research’s benefits include reducing agriculture waste of pineapple leaf, which is commonly being thrown out by the farmers when the fruits are harvested. It focuses not only on waste reduction but also on economic factors when other industries fully utilise the pineapple leaf.

Extraction and Characterization of Natural Cellulosic Fiber from Pandanus amaryllifolius Leaves

Pandanus amaryllifolius is a member of Pandanaceae family and is abundant in south-east Asian countries including Malaysia, Thailand, Indonesia and India. In this study, Pandanus amaryllifolius fibres were extracted via a water retting extraction process and were investigated as potential fibre reinforcement in polymer composite. Several tests were carried out to investigate the characterization of Pandanus amaryllifolius fibre such as chemical composition analysis which revealed Pandanus amaryllifolius fibre’s cellulose, hemicellulose and lignin content of 48.79%, 19.95% and 18.64% respectively. Material functional groups were analysed by using Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction analysis confirming the presence of cellulose and amorphous substances in the fibre. The morphology of extracted Pandanus amaryllifolius fibre was studied using a scanning electron microscope (SEM). Further mechanical behaviour of fibre was investigated using a single fibre test with 5 kN cell load and tensile strength was found to be 45.61 ± 16.09 MPa for an average fibre diameter of 368.57 ± 50.47 μm. Meanwhile, moisture content analysis indicated a 6.00% moisture absorption rate of Pandanus amaryllifolius fibre. The thermogravimetric analysis justified the thermal stability of Pandanus amaryllifolius fibre up to 210 °C, which is within polymerization process temperature conditions. Overall, the finding shows that Pandanus amaryllifolius fibre may be used as alternative reinforcement particularly for a bio-based polymer matrix.

Detection by fluorescence of pituitary neuroendocrine tumour (PitNET) tissue during endoscopic transsphenoidal surgery using bevacizumab-800CW (DEPARTURE trial): study protocol for a non-randomised, non-blinded, single centre, feasibility and dose-finding trial

IntroductionAchieving gross total resection and endocrine remission in pituitary neuroendocrine tumours (PitNET) can be challenging, especially in PitNETs with cavernous sinus (CS) invasion, defined as a Knosp grade of 3 or 4. A potential target to identify PitNET tissue is vascular endothelial growth factor A (VEGF-A), which expression is known to be significantly higher in PitNETs with CS invasion.Methods and analysisThe aim of this non-randomised, non-blinded, single centre, feasibility and dose-finding phase 1 trial is to determine the feasibility of intraoperative fluorescence imaging detection of PitNET tissue during endoscopic transsphenoidal surgery using the VEGF-A targeting optical agent bevacizumab-800CW (4, 5, 10 or 25 mg). Nine to fifteen patients with a PitNET with a Knosp grade of 3 or 4 will be included. Secondary objectives are: (1) To identify the optimal tracer dose for imaging of PitNET tissue during transsphenoidal surgery for further development in a phase 2 fluorescence molecular endoscopy trial. (2) To quantify fluorescence intensity in vivo and ex vivo with multidiameter single-fibre reflectance, single-fibre fluorescence (MDSFR/SFF) spectroscopy. (3) To correlate and validate both the in vivo and ex vivo measured fluorescence signals with histopathological analysis and immunohistochemical staining. (4) To assess the (sub)cellular location of bevacizumab-800CW by ex vivo fluorescence microscopy. Intraoperative, three imaging moments are defined to detect the fluorescent signal. The tumour-to-background ratios are defined by intraoperative fluorescence in vivo measurements including MDSFR/SFF spectroscopy data and by ex vivo back-table fluorescence imaging. After inclusion of three patients in each dose group, an interim analysis will be performed to define the optimal dose.Ethics and disseminationApproval was obtained from the Medical Ethics Review Board of the University Medical Centre Groningen. Results will be disseminated through national and international journals. The participants and relevant patient support groups will be informed about the results.Trial registration numberNCT04212793

Increasing the Fatigue Resistance of Strain-Hardening Cement-Based Composites (SHCC) by Experimental-Virtual Multi-Scale Material Design

Strain-hardening cement-based composites are a promising class of materials for a wide variety of applications due to their considerable tensile strength and pronounced ductility caused by the development of multiple fine cracks. Nevertheless, the safe use of such composites requires sound knowledge of their mechanical behaviour under different types of loading, particularly under fatigue loading, while considering distinct influences like initial crack width and fibre orientation. To deepen this knowledge, single-fibre pull-out tests on PVA-fibres from a cementitious matrix were carried out to gain information about the micro-mechanical and degradation processes of the fibre. It could be shown that the fibres tend to rupture instead of being pulled out under quasi-static loading. When changing the loading regime to alternating loading, this failure mechanism shifts to pull-out. By varying the experimental parameters such as initial crack width, inclination angle or compressive-force level a clear influence on the fibre’s crack bridging capacity could be observed associated with effects on the degradation processes. Based on the data obtained, a micro-mechanical numerical model was developed to support the assumptions and observations from single-fibre pull-out tests and to enable predictions of the performance of the material on the microscale under cyclic loading.

PLASMA POLYMERIZATION ON UNSIZED BASALT FIBRES FOR IMPROVING THE INTERFACIAL STRENGTH WITH POLYMER MATRICES

Basalt fibres are becoming a promising alternative to synthetic fibres as a green reinforcement phase in polymeric matrix composites, showing excellent mechanical, chemical and thermal properties. In this work we synthetized tetravinylsilane (TVS) or a mixture formed by tetravinylsilane and different percentages of oxygen on the surface of unsized basalt fibres through the Plasma-Enhanced Chemical Vapor Deposition (PECVD) technique for improving the fibre/matrix adhesion. Single fibre tensile test proved the effectiveness of the process, without any degradation of the mechanical properties of modified basalt fibres. Finally, through pull out tests, the interfacial properties of basalt fibres were studied, measuring increases up to 80% of the IFSS for modified fibres compared to neat fibres. This result is the consequence of a greater chemical compatibility between the fibres and the matrix, thanks to the presence of a higher number of Si-O-C groups, and of a mechanical interlocking effect promoted by the increased surface roughness of the plasma-modified fibres.