scholarly journals Composite flywheel material design for high-speed energy storage

2016 ◽  
Vol 14 (3) ◽  
pp. 184-190 ◽  
Author(s):  
Michael A. Conteh ◽  
Emmanuel C. Nsofor
Author(s):  
Michael A. Conteh ◽  
Emmanuel C. Nsofor

This study was conducted to investigate the stress, strain, and strength ratio distributions in the composite flywheel rotor for high-energy density storage applications. Symmetric laminate design was used to avoid shear and extension–bending coupling and to minimize torsion coupling. The rotor studied consists of four anisotropic unidirectional plies. The continuity conditions of the radial stresses and displacements between plies were used to obtain a local stiffness matrix for each ply and develop the global stiffness matrix for the rotor due to the different ply orientations. The Tsai–Wu three-dimensional (3D) quadratic failure criterion in stress space was used to evaluate the strength ratio of the rings. Analysis was done for ply orientations between [±5 deg]S and [±85 deg]S. Three specific ply orientations were reported for discussion. The results show how the stress, strain, and safe rotational speed of the flywheel change as the ply orientations are varied. The circumferential stress was found to be the dominant stress. It increases as the ply angle increased in the circumferential direction while the axial stress decreased. Due to significant improvements in composite materials and technology, the results from this study will contribute to further development of the flywheel which has recently re-emerged as a promising application for energy storage.


2021 ◽  
Vol 11 (20) ◽  
pp. 9544
Author(s):  
Miles Skinner ◽  
Pierre Mertiny

High-velocity and long-lifetime operating conditions of modern high-speed energy storage flywheel rotors may create the necessary conditions for failure modes not included in current quasi-static failure analyses. In the present study, a computational algorithm based on an accepted analytical model was developed to investigate the viscoelastic behavior of carbon fiber reinforced polymer composite flywheel rotors with an aluminum hub assembled via a press-fit. The Tsai‑Wu failure criterion was applied to assess failure. Two simulation cases were developed to explore the effects of viscoelasticity on composite flywheel rotors, i.e., a worst-case operating condition and a case akin to realistic flywheel operations. The simulations indicate that viscoelastic effects are likely to reduce peak stresses in the composite rim over time. However, viscoelasticity also affects stresses in the hub and the hub-rim interface in ways that may cause rotor failure. It was further found that charge-discharge cycles of the flywheel energy storage device may create significant fatigue loading conditions. It was therefore concluded that the design of composite flywheel rotors should include viscoelastic and fatigue analyses to ensure safe operation.


2011 ◽  
Vol 8 (3) ◽  
pp. 386-389 ◽  
Author(s):  
Henry C. Astley ◽  
Thomas J. Roberts

Anuran jumping is one of the most powerful accelerations in vertebrate locomotion. Several species are hypothesized to use a catapult-like mechanism to store and rapidly release elastic energy, producing power outputs far beyond the capability of muscle. Most evidence for this mechanism comes from measurements of whole-body power output; the decoupling of joint motion and muscle shortening expected in a catapult-like mechanism has not been demonstrated. We used high-speed marker-based biplanar X-ray cinefluoroscopy to quantify plantaris muscle fascicle strain and ankle joint motion in frogs in order to test for two hallmarks of a catapult mechanism: (i) shortening of fascicles prior to joint movement (during tendon stretch), and (ii) rapid joint movement during the jump without rapid muscle-shortening (during tendon recoil). During all jumps, muscle fascicles shortened by an average of 7.8 per cent (54% of total strain) prior to joint movement, stretching the tendon. The subsequent period of initial joint movement and high joint angular acceleration occurred with minimal muscle fascicle length change, consistent with the recoil of the elastic tendon. These data support the plantaris longus tendon as a site of elastic energy storage during frog jumping, and demonstrate that catapult mechanisms may be employed even in sub-maximal jumps.


Author(s):  
Matthew E. Riley ◽  
Justin Pettingill

This work will demonstrate the development and experimental validation of the stochastic models to predict the composite material’s mechanical and electromagnetic response as a function of the constituent reinforcing materials. First, stochastic micromechanics models will be developed for the case of multiple disparate supporting materials. These micromechanics models will then be validated against traditional finite element models and experimental results over the feasible parameter space. The developed models will then be utilized to define the optimal geometry of the composite flywheel including constraints such as displacement, stress, flux, magnetic field density, and manufacturability.


2021 ◽  
Author(s):  
Yuan Xie ◽  
Kai Zhang ◽  
Yusuke Yamauchi ◽  
Kenichi Oyaizu ◽  
Zhongfan Jia

We review the electrochemical theory, material design, and device fabrication for nitroxide radical polymers in emerging plastic energy storage and organic electronics.


Sign in / Sign up

Export Citation Format

Share Document