Consequential ex-ante life cycle assessment on clinker production in the EU: How will the future influence its environmental impact?

2021 ◽  
pp. 128081
Author(s):  
Ben Maes ◽  
Amaryllis Audenaert ◽  
Bart Craeye ◽  
Matthias Buyle
2020 ◽  
pp. 0734242X2096663 ◽  
Author(s):  
Shuoyao Wang ◽  
Jeongsoo Yu

China has become the largest electric vehicle (EV) market in the world since 2015. Consequently, the lithium-ion battery (LiB) market in China is also expanding fast. LiB makers are continually introducing new types of LiBs into the market to improve LiBs’ performance. However, there will be a considerable amount of waste LiBs generated in China. These waste LiBs should be appropriately recycled to avoid resources’ waste or environmental pollution problems. Yet, because LiBs’ type keeps changing, the environmental impact and profitability of the waste LiB recycling industry in China become uncertain. In this research, we reveal the detailed life cycle process of EVs’ LiBs in China first. Then, the environmental impact of each type of LiB is speculated using the life cycle assessment (LCA) method. Moreover, we clarify how LiBs’ evolution will affect the economic effect of the waste battery recycling industry in China. We perform a sensitivity analysis focusing on waste LiBs’ collection rate. We found that along with LiBs’ evolution, their environmental impact is decreasing. Furthermore, if waste LiBs could be appropriately recycled, their life cycle environmental impact would be further dramatically decreased. On the other hand, the profitability of the waste battery recycling industry in China would decrease in the future. Moreover, it is essential to improve waste LiBs’ collection rate to establish an efficient waste LiB industry. Such a trend should be noticed by the Chinese government and waste LiB recycling operators to establish a sustainable waste LiB recycling industry in the future.


Forests ◽  
2020 ◽  
Vol 11 (11) ◽  
pp. 1127 ◽  
Author(s):  
Andrea Sgarbossa ◽  
Martina Boschiero ◽  
Francesca Pierobon ◽  
Raffaele Cavalli ◽  
Michela Zanetti

The EU is one of the largest producers and consumers of wood pellets in the world, covering around 36% of the global wood pellet production and around 50% of the global consumption in 2018. The EU wood pellet consumption is expected to further increase in response to the ambitious energy and climate goals for 2030. Currently, wood pellets are mainly produced from sawdust and other sawmill residues; however, other types of forest feedstock are being investigated in order to meet the increasing wood pellet demand and move toward greater energy independence. The aim of this study is to evaluate and compare the environmental impact of different wood pellet supply chains. A comparative cradle-to-grave life cycle assessment is performed considering the following wood feedstock systems: (i) sawdust from sawmill (S1), (ii) roundwood logs (S2), (iii) whole trees from forest thinning operation (S3), and (iv) logging residues produced during forest tree harvesting (S4). The study focuses on Global Warming Potential (GWP), Ozone Depletion Potential (ODP), Photochemical Ozone Creation Potential (POCP), and Human Toxicity Potential (HTP). Results show that S3 displays the lowest figures on all the environmental impact categories considered in this study. Compared to the reference case S1, S3 shows a GWP reduction of 46%, an ODP reduction of 6.6%, a POCP reduction of 14.8%, and HTP reduction of 13.2%. S3 and S4 have lower GWP than S1 and S2, even when the biogenic CO2 emissions are considered. Overall, the life cycle phases that have the highest GWP, POCP, and HTP are the burning phase and the preparation of the material to be pelletized, particularly the drying process. Nevertheless, the main phases that contribute to the ODP are the forest operations and the pellet preparation.


2021 ◽  
Author(s):  
Busola D. Olagunju ◽  
Oludolapo A. Olanrewaju

The concern for environmental related impacts of the cement industry is fast growing in recent times. The industry is challenged with high environmental impact which spans through the entire production process. Life cycle assessment (LCA) evaluates the environmental impact of product or process throughout the cycle of production. This can be done using either or both midpoint (process-oriented) and endpoint (damage-oriented) approaches of life cycle impact assessment (LCIA). This study assessed the environmental impact of 1 kg Ordinary Portland Cement (OPC) using both approaches of LCIA. This analysis was carried out using a data modeled after the rest of the world other than China, India, Europe, US and Switzerland. The dataset was taken from Ecoinvent database incorporated in the SimaPro 9.0.49 software. The result of the analysis showed that clinker production phase produced the highest impact and CO2 is the highest pollutant emitter at both endpoint and midpoint approaches. This is responsible for global warming known to affect both human health and the ecosystem. Also, toxicity in form of emission of high copper affects the ecosystem as well as humans. In addition, high fossil resources (crude oil) are consumed and pose the possibility for scarcity.


Author(s):  
Cheila Almeida ◽  
Philippe Loubet ◽  
Tamíris Pacheco da Costa ◽  
Paula Quinteiro ◽  
Jara Laso ◽  
...  

2021 ◽  
Vol 13 (9) ◽  
pp. 5322
Author(s):  
Gabriel Zsembinszki ◽  
Noelia Llantoy ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  

The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings’ decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact.


Author(s):  
Yuma Sasaki ◽  
Takahiro Orikasa ◽  
Nobutaka Nakamura ◽  
Kiyotada Hayashi ◽  
Yoshihito Yasaka ◽  
...  

Author(s):  
Serenella Sala ◽  
Andrea Martino Amadei ◽  
Antoine Beylot ◽  
Fulvio Ardente

Abstract Purpose Life cycle thinking (LCT) and life cycle assessment (LCA) are increasingly considered pivotal concept and method for supporting sustainable transitions. LCA plays a relevant role in decision support, for the ambition of a holistic coverage of environmental dimensions and for the identification of hotspots, possible trade-offs, and burden shifting among life cycle stages or impact categories. These features are also relevant when the decision support is needed in policy domain. With a focus on EU policies, the present study explores the evolution and implementation of life cycle concepts and approaches over three decades. Methods Adopting an historical perspective, a review of current European Union (EU) legal acts and communications explicitly mentioning LCT, LCA, life cycle costing (LCC), and environmental footprint (the European Product and Organisation Environmental Footprint PEF/OEF) is performed, considering the timeframe from 1990 to 2020. The documents are categorised by year and according to their types (e.g. regulations, directives, communications) and based on the covered sectors (e.g. waste, energy, buildings). Documents for which life cycle concepts and approaches had a crucial role are identified, and a shortlist of these legal acts and communications is derived. Results and discussion Over the years, LCT and life cycle approaches have been increasingly mentioned in policy. From the Ecolabel Regulation of 1992, to the Green Deal in 2019, life cycle considerations are of particular interest in the EU. The present work analysed a total of 159 policies and 167 communications. While in some sectors (e.g. products, vehicles, and waste) life cycle concepts and approaches have been adopted with higher levels of prescriptiveness, implementation in other sectors (e.g. food and agriculture) is only at a preliminary stage. Moreover, life cycle (especially LCT) is frequently addressed and cited only as a general concept and in a rather generic manner. Additionally, more stringent and rigorous methods (LCA, PEF/OEF) are commonly cited only in view of future policy developments, even if a more mature interest in lifecycle is evident in recent policies. Conclusion The EU has been a frontrunner in the implementation of LCT/LCA in policies. However, despite a growing trend in this implementation, the development of new stringent and mandatory requirements related to life cycle is still relatively limited. In fact, there are still issues to be solved in the interface between science and policy making (such as verification and market surveillance) to ensure a wider implementation of LCT and LCA.


Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4146
Author(s):  
Agnieszka Jachura ◽  
Robert Sekret

This paper presents an environmental impact assessment of the entire cycle of existence of the tube-vacuum solar collector prototype. The innovativeness of the solution involved using a phase change material as a heat-storing material, which was placed inside the collector’s tubes-vacuum. The PCM used in this study was paraffin. The system boundaries contained three phases: production, operation (use phase), and disposal. An ecological life cycle assessment was carried out using the SimaPro software. To compare the environmental impact of heat storage, the amount of heat generated for 15 years, starting from the beginning of a solar installation for preparing domestic hot water for a single-family residential building, was considered the functional unit. Assuming comparable production methods for individual elements of the ETC and waste management scenarios, the reduction in harmful effects on the environment by introducing a PCM that stores heat inside the ETC ranges from 17 to 24%. The performed analyses have also shown that the method itself of manufacturing the materials used for the construction of the solar collector and the choice of the scenario of the disposal of waste during decommissioning the solar collector all play an important role in its environmental assessment. With an increase in the application of the advanced technologies of materials manufacturing and an increase in the amount of waste subjected to recycling, the degree of the solar collector’s environmental impact decreased by 82% compared to its standard manufacture and disposal.


2021 ◽  
Vol 13 (13) ◽  
pp. 7386
Author(s):  
Thomas Schaubroeck ◽  
Simon Schaubroeck ◽  
Reinout Heijungs ◽  
Alessandra Zamagni ◽  
Miguel Brandão ◽  
...  

To assess the potential environmental impact of human/industrial systems, life cycle assessment (LCA) is a very common method. There are two prominent types of LCA, namely attributional (ALCA) and consequential (CLCA). A lot of literature covers these approaches, but a general consensus on what they represent and an overview of all their differences seems lacking, nor has every prominent feature been fully explored. The two main objectives of this article are: (1) to argue for and select definitions for each concept and (2) specify all conceptual characteristics (including translation into modelling restrictions), re-evaluating and going beyond findings in the state of the art. For the first objective, mainly because the validity of interpretation of a term is also a matter of consensus, we argue the selection of definitions present in the 2011 UNEP-SETAC report. ALCA attributes a share of the potential environmental impact of the world to a product life cycle, while CLCA assesses the environmental consequences of a decision (e.g., increase of product demand). Regarding the second objective, the product system in ALCA constitutes all processes that are linked by physical, energy flows or services. Because of the requirement of additivity for ALCA, a double-counting check needs to be executed, modelling is restricted (e.g., guaranteed through linearity) and partitioning of multifunctional processes is systematically needed (for evaluation per single product). The latter matters also hold in a similar manner for the impact assessment, which is commonly overlooked. CLCA, is completely consequential and there is no limitation regarding what a modelling framework should entail, with the coverage of co-products through substitution being just one approach and not the only one (e.g., additional consumption is possible). Both ALCA and CLCA can be considered over any time span (past, present & future) and either using a reference environment or different scenarios. Furthermore, both ALCA and CLCA could be specific for average or marginal (small) products or decisions, and further datasets. These findings also hold for life cycle sustainability assessment.


Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3820
Author(s):  
Mélanie Douziech ◽  
Lorenzo Tosti ◽  
Nicola Ferrara ◽  
Maria Laura Parisi ◽  
Paula Pérez-López ◽  
...  

Heat production from a geothermal energy source is gaining increasing attention due to its potential contribution to the decarbonization of the European energy sector. Obtaining representative results of the environmental performances of geothermal systems and comparing them with other renewables is of utmost importance in order to ensure an effective energy transition as targeted by Europe. This work presents the outputs of a Life Cycle Assessment (LCA) performed on the Rittershoffen geothermal heat plant applying guidelines that were developed within the H2020 GEOENVI project. The production of 1 kWhth from the Rittershoffen heat plant was compared to the heat produced from natural gas in Europe. Geothermal heat production performed better than the average heat production in climate change and resource use, fossil categories. The LCA identified the electricity consumption during the operation and maintenance phase as a hot spot for several impact categories. A prospective scenario analysis was therefore performed to assess the evolution of the environmental performances of the Rittershoffen heat plant associated with the future French electricity mixes. The increase of renewable energy shares in the future French electricity mix caused the impact on specific categories (e.g., land use and mineral and metals resource depletion) to grow over the years. However, an overall reduction of the environmental impacts of the Rittershoffen heat plant was observed.


Sign in / Sign up

Export Citation Format

Share Document