scholarly journals Use of carbonated water to improve the mechanical properties and reduce the carbon footprint of cement-based materials with recycled aggregates

2022 ◽  
Vol 57 ◽  
pp. 101886
Author(s):  
David Suescum-Morales ◽  
José María Fernández-Rodríguez ◽  
José Ramón Jiménez
Keyword(s):  
Mechanical Properties ◽  
Carbon Footprint ◽  
Recycled Aggregates ◽  
Cement Based Materials ◽  
Carbonated Water

scholarly journals Mechanical Properties of Cement-Based Materials with Recycled Plastic: A Review

2020 ◽  
Vol 12 (21) ◽  
pp. 9060
Author(s):  
Jun Kil Park ◽  
Min Ook Kim
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Physical And Mechanical Properties ◽  
Recycled Aggregates ◽  
Split Tensile Strength ◽  
Plastic Recycling ◽  
Cement Based Materials ◽  
High Pollution ◽  
Recycled Plastics

This study summarizes existing studies on plastic recycling to determine whether ocean plastics with high pollution degrees could be used for cement-based materials. In particular, the methods to recycle plastic waste, the effects of recycled plastic on the physical and mechanical properties of cement-based materials, and their effective usage were investigated. Workability, density, compressive strength, split tensile strength, and flexural strength of cement-based materials with recycled plastics were reviewed and divided into recycled aggregates and fibers. Based on the previous investigation, the direction of research necessary to recycle marine plastics is suggested. As the amount of recycled plastic aggregate increased, the mechanical strength of cement-based materials decreased. The recycled plastic aggregate lowered the density and increased porosity of the cement-based material. Meanwhile, recycled plastic fibers reduced the compressive strength but improved the tensile strength; to effectively improve tensile strength, a volume content of less than 1.5% should be added to prevent balling fibers. Furthermore, an appropriate aspect ratio should be determined based on the type of plastic to be used.

scholarly journals Discrete Element Simulation Analysis of Biaxial Mechanical Properties of Concrete with Large-Size Recycled Aggregate

2021 ◽  
Vol 13 (13) ◽  
pp. 7498
Author(s):  
Tan Li ◽  
Jianzhuang Xiao
Keyword(s):  
Mechanical Properties ◽  
Stress State ◽  
Strain Curve ◽  
Confining Pressure ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Aggregate Model ◽  
Large Size

Concrete made with large-size recycled aggregates is a new kind of recycled concrete, where the size of the recycled aggregate used is 25–80 mm, which is generally three times that of conventional aggregate. Thus, its composition and mechanical properties are different from that of conventional recycled concrete and can be applied in large-volume structures. In this study, recycled aggregate generated in two stages with randomly distributed gravels and mortar was used to replace the conventional recycled aggregate model, to observe the internal stress state and cracking of the large-size recycled aggregate. This paper also investigated the mechanical properties, such as the compressive strength, crack morphology, and stress–strain curve, of concrete with large-size recycled aggregates under different confining pressures and recycled aggregate incorporation ratios. Through this research, it was found that when compared with conventional concrete, under the confining pressure, the strength of large-size recycled aggregate concrete did not decrease significantly at the same stress state, moreover, the stiffness was increased. Confining pressure has a significant influence on the strength of large-size recycled aggregate cocrete.

Effect of mixed recycled aggregates on mechanical properties of recycled concrete

2015 ◽  
Vol 67 (5) ◽  
pp. 247-256 ◽  
Author(s):  
Desirée Rodríguez-Robles ◽  
Julia García-González ◽  
Andrés Juan-Valdés ◽  
Julia Ma Morán-del Pozo ◽  
M. Ignacio Guerra-Romero
Keyword(s):  
Mechanical Properties ◽  
Recycled Concrete ◽  
Recycled Aggregates ◽  
Mixed Recycled Aggregates

scholarly journals Ultrafine portland cement performance

2018 ◽  
Vol 68 (330) ◽  
pp. 157 ◽  
Author(s):  
C. Argiz ◽  
E. Reyes ◽  
A. Moragues
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Portland Cement ◽  
Silica Fume ◽  
Structure Refinement ◽  
Size Distributions ◽  
Particle Size Distributions ◽  
Blending Method ◽  
Cement Based Materials ◽  
Ultrafine Cement

By mixing several binder materials and additions with different degrees of fineness, the packing density of the final product may be improved. In this work, ultrafine cement and silica fume mixes were studied to optimize the properties of cement-based materials. This research was performed in mortars made of two types of cement (ultrafine Portland cement and common Portland cement) and two types of silica fume with different particle-size distributions. Two Portland cement replacement ratios of 4% and 10% of silica fume were selected and added by means of a mechanical blending method. The results revealed that the effect of the finer silica fume mixed with the coarse cement enhances the mechanical properties and pore structure refinement at a later age. This improvement is somewhat lower in the case of ultrafine cement with silica fume.

scholarly journals MECHANICAL PROPERTIES OF RECYCLED AGGREGATE CONCRETE WITH STEEL FIBER: A REVIEW

2019 ◽  
Vol 26 (3) ◽  
pp. 37-42
Author(s):  
Ashtar S. Al-Luhybi
Keyword(s):  
Mechanical Properties ◽  
Steel Fiber ◽  
Recycled Aggregate Concrete ◽  
Strength Characteristics ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Aggregate Concrete ◽  
Building Process

In the building process, the recycling of aggregates arising from building and demolition debris is one of the best alternatives to maintain the environment and the areas needed to bury these debris. It also helps to preserve natural concrete sources from depletion efficiently. The use of recycled aggregates in new concrete manufacturing, however, leads to a decrease in concrete\\\’s strength characteristics. This reduction rises with the rise in the percentage of recycled aggregates used in concrete, which has caused many researchers to undertake many researches on how to enhance the characteristics of recycled aggregate-containing concrete. This paper presents several studies that examined the effect of adding steel fiber to improve the properties of concrete containing a coarse recycled aggregate.

scholarly journals Studies on Hemp and Recycled Aggregate Concrete

2020 ◽  
Vol 14 (1) ◽  
Author(s):  
Samer Ghosn ◽  
Nour Cherkawi ◽  
Bilal Hamad
Keyword(s):  
Mechanical Properties ◽  
Fiber Length ◽  
Plain Concrete ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Silane Treatment ◽  
Hemp Fiber ◽  
Fiber Treatment

Abstract This paper reports on the first phase of a multi-phase research program conducted at the American University of Beirut (AUB) on “Hemp and Recycled Aggregates Concrete” (HRAC). HRAC is a new sustainable concrete material where hemp fibers are incorporated in the mix, the coarse aggregate content is reduced by 20% of the concrete volume, and 50% of the natural coarse aggregates (NCA) are replaced by recycled concrete aggregates (RCA), thus saving on natural resources and addressing the problem of waste material disposal. The effect of the new material on concrete consistency and hardened mechanical properties was studied. Also, few durability tests were conducted. Variables included percentage replacement of NCA by RCA (0 or 50%), maximum size aggregate (10 or 20 mm), hemp fiber length (20 or 30 mm), and hemp fiber treatment (alkali or silane or acetyl). Fiber characterization tests were conducted including morphology, crystallinity, and thermal analysis. The tests indicated that alkali and acetyl fiber treatments were better than the silane treatment in removing impurities on the fiber surface. Also, alkali and acetyl treatments have increased the crystallinity of the fibers while silane treatment decreased it. Results of mechanical properties tests showed that while HRAC has considerable lower compressive strength and modulus of elasticity than plain concrete, the flexural strength and splitting tensile strength are not significantly affected. The flexural stress–strain behavior of HRAC is ductile as compared to the brittle behavior of the plain concrete beams indicating positive impact on toughness and energy dissipation. The durability tests indicated that whereas HRAC mixes have higher absorption than plain concrete, they have better thermal properties and their resistance to freeze–thaw cycles is comparable to plain concrete. All test results were not significantly affected by fiber length or fiber treatment.

Investigation of the mechanical properties of concrete containing recycled aggregate and scrap crumb rubber and polypropylene fibers

2020 ◽  
pp. 147776062097750
Author(s):  
Moein Khoshroo ◽  
Ali Akbar Shirzadi Javid ◽  
Nima Rajabi Bakhshandeh ◽  
Mohamad Shalchiyan
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Polypropylene Fiber ◽  
Crumb Rubber ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Fine Aggregate ◽  
Mixture Ratio ◽  
Coarse Aggregates

In this study, the effect of using crumb rubber and recycled aggregates on the mechanical properties of concrete has been evaluated as areplacement of fine and coarse aggregates In order to add the admixtures and evaluate their combined effect, 20 different types of concrete mixture ratio were prepared. The results indicated that in those samples containing crumb rubber and recycled aggregates the compressive strength is reduced and adding fiber up to 0.1%. to these concrete samples can improve the compressive strength Also, the tensile strength of the samples mixed with crumb rubber and recycled aggregates were decreased, and with the addition of propylene fiber up to 0.4%. the tensile strength slightly increased Moreover by adding the crumb rubber to the samples the elasticity modulus was reduced but by adding fiber to samples about 0.1% and 0.2.% the modulus of elasticity of concrete in all samples were increased. According to the results, it can be said that using the combination of 5% of crumb rubber as a replacement of fine aggregate, and the combination of 35% of recycled aggregates as a replacement of coarse aggregate, and also by adding 0.1% polypropylene fiber in volumetric percentage of concrete along with adding 7% of micro silica as a replacement of cement led to the best effect on the mechanical properties of concrete.

Sign in / Sign up

Export Citation Format

Share Document