Immobilization of TiO2 onto a polymeric support for photocatalytic oxidation of a paraben's mixture

Author(s):  
João Gomes ◽  
Beatriz Maniezo ◽  
Patrícia Alves ◽  
Paula Ferreira ◽  
Rui C. Martins
2019 ◽  
Vol 18 (8) ◽  
pp. 1683-1692 ◽  
Author(s):  
Lidia Favier ◽  
Lacramioara Rusu ◽  
Andrei Ionut Simion ◽  
Raluca Maria Hlihor ◽  
Mariana Liliana Pacala ◽  
...  

1983 ◽  
Vol 48 (7) ◽  
pp. 2021-2027 ◽  
Author(s):  
Eliška Kálalová ◽  
Olga Populová ◽  
Štěpánka Štokrová ◽  
Pavel Stopka

Copper(II) and nickel(II) ions were bonded in complexes of salicylideneimine type on a glycidyl methacrylate-ethylenedimethacrylate copolymer. The geometry of the complexes on the polymer was studied by measuring their magnetic properties, EPR spectra, and ultraviolet-visible spectra.Only paramagnetic complexes possessing a pseudo-tetrahedral configuration were found. The effect of the polymer matrix and of the immobility of the bonded Schiff base on the distortion of the coordination sphere of the central ion is discussed.


Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 54
Author(s):  
Yu-Ming Chu ◽  
Hafiz Muhammad Asif Javed ◽  
Muhammad Awais ◽  
Muhammad Ijaz Khan ◽  
Sana Shafqat ◽  
...  

The photocatalytic pretreatment of lignocellulosic biomass to oxidize lignin and increase biomass stability has gained attention during the last few years. Conventional pretreatment methods are limited by the fact that they are expensive, non-renewable and contaminate the anaerobic digestate later on. The present study was focused to develop a metal-derived photocatalyst that can work with visible electromagnetic spectra light and oxidize commercial lignin liquor. During this project the advanced photocatalytic oxidation of lignin was achieved by using a quartz cube tungsten T3 Halogen 100 W lamp with a laboratory manufactured TiO2-ZnO nanoparticle (nanocomposite) in a self-designed apparatus. The products of lignin oxidation were confirmed to be vanillic acid (9.71 ± 0.23 mg/L), ferrulic acid (7.34 ± 0.16 mg/L), benzoic acid (6.12 ± 0.17 mg/L) and p-coumaric acid (3.80 ± 0.13 mg/L). These all products corresponded to 85% of the lignin oxidation products that were detectable, which is significantly more than any previously reported lignin pretreatment with even more intensity. Furthermore, all the pretreatment samples were supplemented in the form of feedstock diluent in uniformly operating continuously stirred tank reactors (CSTRs). The results of pretreatment revealed 85% lignin oxidation and later on these products did not hinder the CSTR performance at any stage. Moreover, the synergistic effects of pretreated lignin diluent were seen that resulted in 39% significant increase in the methane yield of the CSTR with constant operation. Finally, the visible light and nanoparticles alone could not pretreat lignin and when used as diluent, halted and reduced the methane yield by 37% during 4th HRT.


Author(s):  
Shuangjun Li ◽  
Linglong Chen ◽  
Zhong Ma ◽  
Guisheng Li ◽  
Dieqing Zhang

AbstractThe emission of nitrogen oxides (NOx) increases year by year, causing serious problems to our livelihoods. The photocatalytic oxidation of NOx has attracted more attention recently because of its efficient removal of NOx, especially for low concentrations of NOx. In this review, the mechanism of the photocatalytic oxidation of NOx is described. Then, the recent progress on the development of photocatalysts is reviewed according to the categories of inorganic semiconductors, bismuth-based compounds, nitrogen carbide polymer, and metal organic frameworks (MOFs). In addition, the photoelectrocatalytic oxidation of NOx, a method involving the application of an external voltage on the photocatalytic system to further increase the removal efficiency of NOx, and its progress are summarized. Finally, we outline the remaining challenges and provide our perspectives on the future directions for the photocatalytic oxidation of NOx.


2020 ◽  
Vol 18 (1) ◽  
pp. 1148-1166
Author(s):  
Ganjar Fadillah ◽  
Septian Perwira Yudha ◽  
Suresh Sagadevan ◽  
Is Fatimah ◽  
Oki Muraza

AbstractPhysical and chemical methods have been developed for water and wastewater treatments. Adsorption is an attractive method due to its simplicity and low cost, and it has been widely employed in industrial treatment. In advanced schemes, chemical oxidation and photocatalytic oxidation have been recognized as effective methods for wastewater-containing organic compounds. The use of magnetic iron oxide in these methods has received much attention. Magnetic iron oxide nanocomposite adsorbents have been recognized as favorable materials due to their stability, high adsorption capacities, and recoverability, compared to conventional sorbents. Magnetic iron oxide nanocomposites have also been reported to be effective in photocatalytic and chemical oxidation processes. The current review has presented recent developments in techniques using magnetic iron oxide nanocomposites for water treatment applications. The review highlights the synthesis method and compares modifications for adsorbent, photocatalytic oxidation, and chemical oxidation processes. Future prospects for the use of nanocomposites have been presented.


Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1102
Author(s):  
Paola Franco ◽  
Iolanda De Marco

Ophthalmic drugs used for the treatment of various ocular diseases are commonly administered by eye drops. However, due to anatomical and physiological factors, there is a low bioavailability of the active principle. In order to increase the drug residence time on the cornea to adequate levels, therapeutic contact lenses have recently been proposed. The polymeric support that constitutes the contact lens is loaded with the drug; in this way, there is a direct and effective pharmacological action on the target organ, promoting a prolonged release of the active principle. The incorporation of ophthalmic drugs into contact lenses can be performed by different techniques; nowadays, the soaking method is mainly employed. To improve the therapeutic performance of drug-loaded contact lenses, innovative methods have recently been proposed, including the impregnation with supercritical carbon dioxide. This updated review of therapeutic contact lenses production and application provides useful information on the most effective preparation methodologies, recent achievements and future perspectives.


1998 ◽  
Vol 180 (2) ◽  
pp. 111-122 ◽  
Author(s):  
Darrin S. Muggli ◽  
Kelley H. Lowery ◽  
John L. Falconer

Sign in / Sign up

Export Citation Format

Share Document