scholarly journals Magnetic iron oxide/clay nanocomposites for adsorption and catalytic oxidation in water treatment applications

2020 ◽  
Vol 18 (1) ◽  
pp. 1148-1166
Author(s):  
Ganjar Fadillah ◽  
Septian Perwira Yudha ◽  
Suresh Sagadevan ◽  
Is Fatimah ◽  
Oki Muraza
Keyword(s):  
Iron Oxide ◽  
Water Treatment ◽  
Photocatalytic Oxidation ◽  
Low Cost ◽  
Synthesis Method ◽  
Chemical Oxidation ◽  
Magnetic Iron Oxide ◽  
Oxidation Processes ◽  
Recent Developments ◽  
Physical And Chemical

AbstractPhysical and chemical methods have been developed for water and wastewater treatments. Adsorption is an attractive method due to its simplicity and low cost, and it has been widely employed in industrial treatment. In advanced schemes, chemical oxidation and photocatalytic oxidation have been recognized as effective methods for wastewater-containing organic compounds. The use of magnetic iron oxide in these methods has received much attention. Magnetic iron oxide nanocomposite adsorbents have been recognized as favorable materials due to their stability, high adsorption capacities, and recoverability, compared to conventional sorbents. Magnetic iron oxide nanocomposites have also been reported to be effective in photocatalytic and chemical oxidation processes. The current review has presented recent developments in techniques using magnetic iron oxide nanocomposites for water treatment applications. The review highlights the synthesis method and compares modifications for adsorbent, photocatalytic oxidation, and chemical oxidation processes. Future prospects for the use of nanocomposites have been presented.

Perspectives of Hydrothermal Synthesis of Fluorides for Luminescence Applications

2018 ◽  
pp. 277-303
Author(s):  
Nilesh. S. Ugemuge ◽  
Chhatrasal Gayner ◽  
V. Natrajan ◽  
Sanjay. J. Dhoble
Keyword(s):  
Hydrothermal Synthesis ◽  
Fine Particles ◽  
Low Cost ◽  
Synthesis Method ◽  
Wide Range ◽  
Hygroscopic Nature ◽  
Recent Developments ◽  
Conventional Methods ◽  
Size And Morphology ◽  
Physical And Chemical

Hydrothermal synthesis is an easy, portable, less-hazardous, and low-cost synthesis method. Various researchers across the globe are worked on the synthesis of different materials via this route. Practically, fluorides are difficult to synthesize due to their hygroscopic nature by conventional methods. But, the hydrothermal synthesis is used to prepare several compositionally optimized fluoride-based materials using closed-system physical and chemical processes in an aqueous solution at low temperatures and pressures. The silent features of the hydrothermal method over conventional methods of materials processing are a crystallization of materials, crystal growth, in the processing of a wide range of materials not only the bulk crystals but fine particles with a controlled size and morphology. Therefore, in order to place its numerous recent developments, past and current research come together in this chapter. This chapter is a recent clocking update for synthesis, materials, and their applications.

scholarly journals Materials and Applications for Low-Cost Ceramic Membranes

Membranes ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 105 ◽  
Author(s):  
Amanmyrat Abdullayev ◽  
Maged Bekheet ◽  
Dorian Hanaor ◽  
Aleksander Gurlo
Keyword(s):  
Water Treatment ◽  
Raw Materials ◽  
Low Cost ◽  
Temperature Stability ◽  
Ceramic Membranes ◽  
Production Costs ◽  
High Temperature Stability ◽  
Waste Products ◽  
Recent Developments ◽  
Materials Used

In water treatment applications, the use of ceramic membranes is associated with numerous advantages relative to polymer-based filtration systems. High-temperature stability, fouling resistance, and low maintenance requirements contribute to lower lifecycle costs in such systems. However, the high production costs of most commercially available ceramic membranes, stemming from raw materials and processing, are uneconomical for such systems in most water treatment applications. For this reason, there is a growing demand for new ceramic membranes based on low-cost raw materials and processes. The use of unrefined mineral feedstocks, clays, cement, sands, and ash as the basis for the fabrication of ceramic membranes offers a promising pathway towards the obtainment of effective filtration systems that can be economically implemented in large volumes. The design of effective ceramic filtration membranes based on low-cost raw materials and energy-efficient processes requires a balance of pore structure, mass flow, and robustness, all of which are highly dependent on the composition of materials used, the inclusion of various pore-forming and binding additives, and the thermal treatments to which membranes are subjected. In this review, we present recent developments in materials and processes for the fabrication of low-cost membranes from unrefined raw materials, including clays, zeolites, apatite, waste products, including fly ash and rice husk ash, and cement. We examine multiple aspects of materials design and address the challenges relating to their further development.

Screening of chemical oxidation processes and other methods for decolorization of urine for its re-use as toilet-flush liquid in ecological sanitation systems

2004 ◽  
Vol 49 (4) ◽  
pp. 241-246 ◽  
Author(s):  
H. Gulyas ◽  
K. Breuer ◽  
B. Lindner ◽  
R. Otterpohl
Keyword(s):  
Biological Treatment ◽  
Photocatalytic Oxidation ◽  
Uv Light ◽  
Chemical Oxidation ◽  
Source Control ◽  
Activated Carbon Adsorption ◽  
Colour Removal ◽  
Yellow Colour ◽  
Oxidation Processes ◽  
Brown Colour

Because of its potential use as fertilizer, urine (“yellow water”) is a resource originating from sanitation. Its separate collection in no-mix toilets is a beneficial aspect of ecological (source control) sanitation. In order to avoid dilution of the fertilizing nutrients with toilet flush water, the utilization of yellow water as toilet flush liquid seems to be advantageous. To be accepted for this purpose, urine has to be decolorized (and also deodorized). In this study activated carbon adsorption, irradiation with UV light of different wavelengths, the advanced oxidation processes ultrasound, UV/H2O2, and photocatalytic oxidation have failed to decolorize urine. Biological treatment caused brown colour of the treated urine. Only ozonation was successful in colour removal, although it did not affect TOC. In spite of darkening of yellow water during biological treatment (generation of humic substances), smaller ozone doses were required for decolorizing the biologically pre-treated urine than for original urine. Photocatalytic oxidation of biologically treated urine also removed brown colour, but the original yellow colour remained. In ozonated urine, yellow colour was reconstituted unless hydrogen peroxide was added. In addition to colour removal, ozone contributed to deodorization as a consequence of ammonia stripping and probably of phenol oxidation.

scholarly journals Magnetic Iron Oxide Colloids for Environmental Applications

2021 ◽  
Author(s):  
Alvaro Gallo-Cordova ◽  
Daniela Almeida Streitwieser ◽  
María del Puerto Morales ◽  
Jesús G. Ovejero
Keyword(s):  
Iron Oxide ◽  
Low Cost ◽  
High Surface ◽  
Volume Ratio ◽  
Efficient Production ◽  
Ionic Exchange ◽  
Magnetic Iron Oxide ◽  
Oil Crops ◽  
Organic Pollutants Removal ◽  
Pollutants Removal

This chapter deals with magnetic colloids with catalytic properties for the treatment of polluted waters and the efficient production of fuel alternatives. This kind of materials presents great advantages such as high surface/volume ratio, reproducibility, selectivity, ability to be magnetic harvested, functionalizable surfaces (e.g. with tunable pores and selective chelators deposited on them), high efficiencies and reusability. In particular, this chapter will consider the case of magnetic iron oxide colloids, which can be easily synthesized at low cost, are biocompatible and presents a well-developed surface chemistry. The most common techniques for the synthesis and functionalization of these magnetic nanoparticles will be reviewed and summarized. The iron oxide nanoparticles present outstanding properties that can be exploited in different aspect of the wastewater treatment such as heavy metals and organic pollutants removal by ionic exchange or adsorption, and degradation of the contaminants by advanced oxidation processes, among others. In the field of alternative energies, they have also been used as catalysts for biofuels production from oil crops, in Fischer-Tropsch reactions for liquid hydrocarbons and many other processes with potential environmental impact.

scholarly journals A Review of Recent Research Results on Soot: The Formation of a Kind of Carbon-Based Material in Flames

2021 ◽  
Vol 8 ◽  
Author(s):  
Jianfei Xi ◽  
Guoqing Yang ◽  
Jie Cai ◽  
Zhongzhu Gu
Keyword(s):  
Carbon Nanomaterials ◽  
Diffusion Flames ◽  
Soot Formation ◽  
Low Cost ◽  
Synthesis Method ◽  
Future Research ◽  
Fuel Type ◽  
Basic Understanding ◽  
Physical And Chemical ◽  
Carbon Based

As a product generated from incomplete combustion, soot is harmful to people’s health and the environment. In recent decades, much attention has been paid to the control of soot generation in combustion systems. Efforts to reduce soot emissions depend on a basic understanding of the physical and chemical pathways from fuel to soot particles in flames. At the same time, flame synthesis method has become an alternative method for the preparation of carbon nanomaterials because of its advantages of low cost and mass production. Carbon-based materials can be synthesized within the sooting zones in flames. The research of soot formation mechanism in flames can provide support for the synthesis of carbon nanomaterials. In this paper, the effects of additives, temperature, and fuel type on soot formation characteristics and soot nanostructure in diffusion flames are reviewed. The deficiencies and prospects are put forward for future research.

scholarly journals Plant-Extract-Mediated Synthesis of Metal Nanoparticles

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Yunhui Bao ◽  
Jian He ◽  
Ke Song ◽  
Jie Guo ◽  
Xianwu Zhou ◽  
...  
Keyword(s):  
Metal Nanoparticles ◽  
Plant Extracts ◽  
Low Cost ◽  
Synthesis Method ◽  
Chemical Properties ◽  
Environmental Friendliness ◽  
Preparation Methods ◽  
Stabilizing Agents ◽  
Potential Applications ◽  
Physical And Chemical

Metal nanoparticles (MNPs) have been widely used in several fields including catalysis, bioengineering, photoelectricity, antibacterial, anticancer, and medical imaging due to their unique physical and chemical properties. In the traditional synthesis method of MNPs, toxic chemicals are generally used as reducing agents and stabilizing agents, which is fussy to operate and extremely environment unfriendly. Based on this, the development of an environment-friendly synthesis method of MNPs has recently attracted great attention. The use of plant extracts as reductants and stabilizers to synthesize MNPs has the advantages of low cost, environmental friendliness, sustainability, and ease of operation. Besides, the as-synthesized MNPs are nontoxic, more stable, and more uniform in size than the counterparts prepared by the traditional method. Thus, green preparation methods have become a research hotspot in the field of MNPs synthesis. In this review, recent advances in green synthesis of MNPs using plant extracts as reductants and stabilizers have been systematically summarized. In addition, the insights into the potential applications and future development for MNPs prepared by using plant extracts have been provided.

Sign in / Sign up

Export Citation Format

Share Document