Chemical Vapor Deposition and Thermal Oxidation of Cuprous Phosphide Nanofilm

Inorganic semiconductors usually show n-type characterization; the development of p-type inorganic semiconductor material will provide more opportunities for novel devices. In this paper, we investigated the chemical vapor deposition (CVD) of p-type cuprous phosphide (Cu3P) nanofilm and studied its thermal oxidation behavior. Cu3P film was characterized by optical microscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), laser Raman spectroscopy (Raman), and fluorescence spectroscopy (PL). We found that the thickness of film ranged from 4 to 10 nm, and the film is unstable at temperatures higher than room temperature in air. We provide a way to prepare inorganic phosphide nanofilms. In addition, the possible thermal oxidation should be taken into consideration for practical application.

Flexible, Rapid Response, Hybrid Inorganic-Organic SnSe2-PEDOT:PSS Bulk Heterojunction based High-Performance Broadband Photodetector

Photodetectors based on inorganic semiconductors demonstrate superior responsivity but their high thermal budget fabrication process is a serious impediment for emerging applications. Hybrid photodetectors based on organic-inorganic heterojunctions synergistically offer...

Covalent organic frameworks with high quantum efficiency in photocatalytic hydrogen evolution: mediating charge separation

Compared with inorganic semiconductors, the difficulty of exciton dissociation is one of the main reasons for the lower photocatalytic activity of organic semiconductors. In this work, we report that the charge carrier lifetime is dramatically prolonged by incorporating a suitable donor-acceptor (β-ketene-CN) pair to a covalent organic framework nanosheet (CN-CON). CN-CON showed remarkably high apparent quantum efficiency up to 82.6% at 450 nm in photocatalytic H2 evolution, superior to all the COFs reported so far. The charge carrier kinetic analysis and femtosecond transient absorption spectroscopy characterizations verified that CN-CON had intrinsically lower exciton binding energies and hence longer-lived charge carriers than the corresponding CON without CN unit. This work provides an excellent model for gaining insight into the nature of ultrashort-lived active species in polymeric organic photocatalysts.

Synthesis, characterization and optoelectronic properties of 2D hybrid RPbX4 semiconductors based on an isomer mixture of hexanediamine-based dications

Three new hybrid two-dimensional (2D) organic–inorganic semiconductors are presented, which contain lead halides and a mixture of hexanediamine-based isomers in the stoichiometry [2,2,4(2,4,4)-trimethyl-1,6-hexanediamine]PbX4 (X = I, Br, Cl). These hexanediamine derivatives, with attached methyl groups at the carbon backbone of both isomers, determine the packing of the organic layers between the inorganic 2D sheets, while the optical absorption and photoluminescence spectra reveal excitonic peaks at T = 77 K and room temperature. The as-synthesized semiconductors were stored for three years in the dark and under low humidity and were examined again and the results were compared to those of the fresh materials. The chloride analogue, after the three year storage, displays white-like luminescence. The use of non-equivalent isomer and racemic mixtures in the organic component to form hybrid organic–inorganic semiconductors is an efficient method to alter the properties of 2D perovskites by tuning the isomers’ chemical functionalities. Finally, a comparison of the observed excitonic absorption and photoluminescence signals to that of analogous 2D compounds is discussed.

A negative piezo-conductive effect from doped semiconducting polymer thin films

In the past years, piezo-conductive sensors have drawn great attention in both academic and industrial sectors. The piezo-conductive sensors made by inorganic semiconductors exhibited poor mechanical flexibility, restricting their further practical applications. In this study, we report the piezo-conductive sensors by a semiconducting polymer, poly(3,4-ethylenedioxythiophene) doped with tosylate ions (PEDOT:Tos) thin films. Systemically studies indicate that the piezo-conductive response of the PEDOT:Tos thin films is originated from the deformation of the PEDOT crystal cells and the stretched π–π distances induced by Tos. Moreover, the negative piezo-conductive effect, for the first time, is observed from PEDOT:Tos thin film under the pressure. A working mechanism is further proposed to interpret the transient from a positive to a negative piezo-conductive response within the PEDOT:Tos thin films. Our studies offer a facile route to approach effective piezo-conductive sensors based on conjugated polymers.

Recent Trends and Developments in Conducting Polymer Nanocomposites for Multifunctional Applications

Electrically-conducting polymers (CPs) were first developed as a revolutionary class of organic compounds that possess optical and electrical properties comparable to that of metals as well as inorganic semiconductors and display the commendable properties correlated with traditional polymers, like the ease of manufacture along with resilience in processing. Polymer nanocomposites are designed and manufactured to ensure excellent promising properties for anti-static (electrically conducting), anti-corrosion, actuators, sensors, shape memory alloys, biomedical, flexible electronics, solar cells, fuel cells, supercapacitors, LEDs, and adhesive applications with desired-appealing and cost-effective, functional surface coatings. The distinctive properties of nanocomposite materials involve significantly improved mechanical characteristics, barrier-properties, weight-reduction, and increased, long-lasting performance in terms of heat, wear, and scratch-resistant. Constraint in availability of power due to continuous depletion in the reservoirs of fossil fuels has affected the performance and functioning of electronic and energy storage appliances. For such reasons, efforts to modify the performance of such appliances are under way through blending design engineering with organic electronics. Unlike conventional inorganic semiconductors, organic electronic materials are developed from conducting polymers (CPs), dyes and charge transfer complexes. However, the conductive polymers are perhaps more bio-compatible rather than conventional metals or semi-conductive materials. Such characteristics make it more fascinating for bio-engineering investigators to conduct research on polymers possessing antistatic properties for various applications. An extensive overview of different techniques of synthesis and the applications of polymer bio-nanocomposites in various fields of sensors, actuators, shape memory polymers, flexible electronics, optical limiting, electrical properties (batteries, solar cells, fuel cells, supercapacitors, LEDs), corrosion-protection and biomedical application are well-summarized from the findings all across the world in more than 150 references, exclusively from the past four years. This paper also presents recent advancements in composites of rare-earth oxides based on conducting polymer composites. Across a variety of biological and medical applications, the fact that numerous tissues were receptive to electric fields and stimuli made CPs more enticing.

Research Progress on Photocatalytic/Photoelectrocatalytic Oxidation of Nitrogen Oxides

The emission of nitrogen oxides (NOx) increases year by year, causing serious problems to our livelihoods. The photocatalytic oxidation of NOx has attracted more attention recently because of its efficient removal of NOx, especially for low concentrations of NOx. In this review, the mechanism of the photocatalytic oxidation of NOx is described. Then, the recent progress on the development of photocatalysts is reviewed according to the categories of inorganic semiconductors, bismuth-based compounds, nitrogen carbide polymer, and metal organic frameworks (MOFs). In addition, the photoelectrocatalytic oxidation of NOx, a method involving the application of an external voltage on the photocatalytic system to further increase the removal efficiency of NOx, and its progress are summarized. Finally, we outline the remaining challenges and provide our perspectives on the future directions for the photocatalytic oxidation of NOx.

Self-consistent dielectric functions of materials: Toward accurate computation of Casimir–van der Waals forces

Research on theoretical calculation of Casimir–van der Waals (vdW) forces is characterized by a great number of inconsistencies and conflicting reports with widely differing results for many known materials, including water, contradicting experimental measurements. Despite its importance for conceptual advances in both fundamental aspects and practical applications, a universal framework for the accurate determination of Casimir-vdW forces is lacking. Here, we propose a universal theoretical platform for computing Casimir-vdW forces, accounting for the electronic dielectric constant, optical bandgap, density, and chemical composition. Using this methodology, we determine the dielectric function for 55 materials, over a wide range of photon energies, covering an extensive list of common metals, organic and inorganic semiconductors, and insulators. Internal consistency of the compiled data is validated using optical sum rules and Kramers-Kronig relations. We demonstrate that the calculated vdW forces based on these data match remarkably well with the experimentally measured vdW forces.

A Negative Piezo-conductive Effect From Doped Semiconducting Polymer Thin Films

In the past years, piezo-conductive sensors have drawn great attention in both academic and industrial sectors. The piezo-conductive sensors made by inorganic semiconductors exhibited poor mechanical flexibility, restricting their further practical applications. In this study, we report the piezo-conductive sensors by a semiconducting polymer, poly(3,4-ethylenedioxythiophene) doped with tosylate ions (PEDOT:Tos) thin films. Systemically studies indicate that the piezo-conductive response of the PEDOT:Tos thin films is originated from the deformation of the PEDOT crystal cells and the stretched π-π distances induced by Tos. Moreover, the negative piezo-conductive effect, for the first time, is observed from PEDOT:Tos thin film under the pressure. A working mechanism is further proposed to interpret the transient from a positive to a negative piezo-conductive response within the PEDOT:Tos thin films. Our studies offer a facile route to approach effective piezo-conductive sensors based on conjugated polymers.