Investigation of Design Parameters and Actuator Constraints in Piezoelectric Energy Harvesters

2015 ◽  
Vol 2 (4-5) ◽  
pp. 1577-1584 ◽  
Author(s):  
K.Viswanath Allamraju ◽  
Raghavendra Ivani ◽  
Srikanth Korla
Keyword(s):  
Design Parameters ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Actuator Constraints

scholarly journals Piezoelectric Energy Generators Based on Spring and Inertial Mass

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2163 ◽  
Author(s):  
Sanghyun Yoon ◽  
Jinhwan Kim ◽  
Kyung-Ho Cho ◽  
Young-Ho Ko ◽  
Sang-Kwon Lee ◽  
...  
Keyword(s):  
Piezoelectric Materials ◽  
Electric Energy ◽  
Inertial Mass ◽  
Design Parameters ◽  
Mechanical Shock ◽  
Generator System ◽  
Energy Harvesters ◽  
Shock Energy ◽  
Piezoelectric Energy ◽  
And Performance

In this study, inertial mass-based piezoelectric energy generators with and without a spring were designed and tested. This energy harvesting system is based on the shock absorber, which is widely used to protect humans or products from mechanical shock. Mechanical shock energies, which were applied to the energy absorber, were converted into electrical energies. To design the energy harvester, an inertial mass was introduced to focus the energy generating position. In addition, a spring was designed and tested to increase the energy generation time by absorbing the mechanical shock energy and releasing a decreased shock energy over a longer time. Both inertial mass and the spring are the key design parameters for energy harvesters as the piezoelectric materials, Pb(Mg1/3Nb2/3)O3-PbTiO3 piezoelectric ceramics were employed to store and convert the mechanical force into electric energy. In this research, we will discuss the design and performance of the energy generator system based on shock absorbers.

scholarly journals Performance Enhancement of a Multiresonant Piezoelectric Energy Harvester for Low Frequency Vibrations

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2770 ◽  
Author(s):  
Iman Izadgoshasb ◽  
Yee Lim ◽  
Ricardo Vasquez Padilla ◽  
Mohammadreza Sedighi ◽  
Jeremy Novak
Keyword(s):  
Cantilever Beam ◽  
Performance Enhancement ◽  
Low Frequency ◽  
Design Parameters ◽  
Vibration Source ◽  
Element Analysis ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Low Frequency Vibration ◽  
External Power Source

Harvesting electricity from low frequency vibration sources such as human motions using piezoelectric energy harvesters (PEH) is attracting the attention of many researchers in recent years. The energy harvested can potentially power portable electronic devices as well as some medical devices without the need of an external power source. For this purpose, the piezoelectric patch is often mechanically attached to a cantilever beam, such that the resonance frequency is predominantly governed by the cantilever beam. To increase the power generated from vibration sources with varying frequency, a multiresonant PEH (MRPEH) is often used. In this study, an attempt is made to enhance the performance of MRPEH with the use of a cantilever beam of optimised shape, i.e., a cantilever beam with two triangular branches. The performance is further enhanced through optimising the design of the proposed MRPEH to suit the frequency range of the targeted vibration source. A series of parametric studies were first carried out using finite-element analysis to provide in-depth understanding of the effect of each design parameters on the power output at a low frequency vibration. Selected outcomes were then experimentally verified. An optimised design was finally proposed. The results demonstrate that, with the use of a properly designed MRPEH, broadband energy harvesting is achievable and the efficiency of the PEH system can be significantly increased.

scholarly journals Design Scalability Study of the G-Shaped Piezoelectric Harvester Based on Generalized Classical Ritz Method and Optimization

Electronics ◽  
2021 ◽  
Vol 10 (16) ◽  
pp. 1887
Author(s):  
Sinwoo Jeong ◽  
Soobum Lee ◽  
Hong-Hee Yoo
Keyword(s):  
Equations Of Motion ◽  
Ritz Method ◽  
Differential Evolution Algorithm ◽  
Design Parameters ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Power Maximization ◽  
Evolution Algorithm ◽  
Piezoelectric Harvester ◽  
Advanced Version

This paper studies the design scalability of a -shaped piezoelectric energy harvester (EH) using the generalized classical Ritz method (GCRM) and differential evolution algorithm. The generalized classical Ritz method (GCRM) is the advanced version of the classical Ritz method (CRM) that can handle a multibody system by assembling its equations of motion interconnected by the constraint equations. In this study, the GCRM is extended for analysis of the piezoelectric energy harvesters with material and/or orientation discontinuity between members. The electromechanical equations of motion are derived for the PE harvester using GCRM, and the accuracy of the numerical simulation is experimentally validated by comparing frequency response functions for voltage and power output. Then the GCRM is used in the power maximization design study that considers four different total masses—15 g, 30 g, 45 g, 60 g—to understand design scalability. The optimized EH has the maximum normalized power density of 23.1 × 103 kg·s·m−3 which is the highest among the reviewed PE harvesters. We discuss how the design parameters need to be determined at different harvester scales.

Flexible, Piezoelectric Aluminium-doped Zinc Oxide Energy Harvesters with Printed Electrodes for Wearable Applications

2021 ◽  
Vol 11 ◽  
Author(s):  
Muhammad Irsyad Suhaimi ◽  
Anis Nurashikin Nordin ◽  
Aliza Aini Md Ralib ◽  
Lai Ming Lim ◽  
Zambri Samsudin
Keyword(s):  
Zinc Oxide ◽  
Output Voltage ◽  
Energy Harvester ◽  
Wearable Sensors ◽  
Low Frequency ◽  
Design Parameters ◽  
Axis Orientation ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Cantilever Structure

Aims: Recent advancements in sensing technology and wireless communications have accelerated the development of the Internet of Things (IoT) which promote the usage of wearable sensors. An emerging trend is to develop self-sustainable wearable devices, thus eliminating the necessity of the user to carry bulky batteries. In this work, the development of a flexible piezoelectric energy harvester that is capable of harvesting energy from low frequency vibrations is presented. The target application of this energy harvester is for usage in smart shoes. Objectives: The objectives of this research is to design, fabricate and test an energy harvester on PET substrate using Aluminum Zinc Oxide as its piezoelectric layer. Methods: The energy harvester was designed as a cantilever structure using PET/AZO/Ag layers in d33 mode which can generate large output voltages with small displacements. The electrodes were designed as an interdigitated structure in which two significant design parameters were chosen, namely the effect of gap between electrodes, g and number of interdigital electrodes (IDE) pairs, N to the output voltage and resonant frequency. Results: The sputtered AZO on PET showed c-axis orientation at 002 peak with 2 values of 34.45° which indicates piezoelectric behaviour. The silver IDE pairs were screen-printed on the AZO thin film. Functionality of the device as an energy harvester was demonstrated by testing it using a shaker. The energy harvester was capable of generating 0.867 Vrms output voltage when actuated at 49.6 Hz vibrations. Conclusion: This indicates that the AZO thin films with printed silver electrodes can be used as flexible, d33 energy harvesters.

Cantilevered Piezoelectric Energy Harvester With a Dynamic Magnifier

2012 ◽  
Vol 134 (3) ◽  
Author(s):  
A. Aladwani ◽  
M. Arafa ◽  
O. Aldraihem ◽  
A. Baz
Keyword(s):  
Energy Harvester ◽  
Proof Mass ◽  
Electrical Power ◽  
Design Parameters ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Piezoelectric Beam ◽  
Piezoelectric Elements ◽  
Fixed End ◽  
Base Structure

Conventional energy harvester typically consists of a cantilevered composite piezoelectric beam which has a proof mass at its free end while its fixed end is mounted on a vibrating base structure. The resulting relative motion between the proof mass and the base structure produces a mechanical strain in the piezoelectric elements which is converted into electrical power by virtue of the direct piezoelectric effect. In this paper, the harvester is provided with a dynamic magnifier consisting of a spring-mass system which is placed between the fixed end of the piezoelectric beam and the vibrating base structure. The main function of the dynamic magnifier, as the name implies, is to magnify the strain experienced by the piezoelectric elements in order to amplify the electrical power output of the harvester. With proper selection of the design parameters of the magnifier, the harvested power can be significantly enhanced and the effective bandwidth of the harvester can be improved. The theory governing the operation of this class of cantilevered piezoelectric energy harvesters with dynamic magnifier (CPEHDM) is developed using the finite element method. Numerical examples are presented to illustrate the merits of the CPEHDM in comparison with the conventional piezoelectric energy harvesters (CPEH). The obtained results demonstrate the feasibility of the CPEHDM as a simple and effective means for enhancing the magnitude and spectral characteristics of CPEH.

scholarly journals Load Resistance Optimization of a Broadband Bistable Piezoelectric Energy Harvester for Primary Harmonic and Subharmonic Behaviors

2021 ◽  
Vol 13 (5) ◽  
pp. 2865 ◽  
Author(s):  
Sungryong Bae ◽  
Pilkee Kim
Keyword(s):  
Energy Harvester ◽  
Load Resistance ◽  
Oscillation Period ◽  
Ambient Vibration ◽  
Ambient Vibrations ◽  
Frequency Dependency ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Optimal Load ◽  
Bistable Energy Harvester

In this study, optimization of the external load resistance of a piezoelectric bistable energy harvester was performed for primary harmonic (period-1T) and subharmonic (period-3T) interwell motions. The analytical expression of the optimal load resistance was derived, based on the spectral analyses of the interwell motions, and evaluated. The analytical results are in excellent agreement with the numerical ones. A parametric study shows that the optimal load resistance depended on the forcing frequency, but not the intensity of the ambient vibration. Additionally, it was found that the optimal resistance for the period-3T interwell motion tended to be approximately three times larger than that for the period-1T interwell motion, which means that the optimal resistance was directly affected by the oscillation frequency (or oscillation period) of the motion rather than the forcing frequency. For broadband energy harvesting applications, the subharmonic interwell motion is also useful, in addition to the primary harmonic interwell motion. In designing such piezoelectric bistable energy harvesters, the frequency dependency of the optimal load resistance should be considered properly depending on ambient vibrations.

scholarly journals Power Density Improvement of Piezoelectric Energy Harvesters via a Novel Hybridization Scheme with Electromagnetic Transduction

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 803
Author(s):  
Zhongjie Li ◽  
Chuanfu Xin ◽  
Yan Peng ◽  
Min Wang ◽  
Jun Luo ◽  
...  
Keyword(s):  
Power Density ◽  
Output Power ◽  
Energy Harvester ◽  
Hybrid Energy ◽  
Energy Harvesters ◽  
Piezoelectric Patch ◽  
Piezoelectric Energy ◽  
Electromagnetic Transduction ◽  
Self Powered ◽  
Power Densities

A novel hybridization scheme is proposed with electromagnetic transduction to improve the power density of piezoelectric energy harvester (PEH) in this paper. Based on the basic cantilever piezoelectric energy harvester (BC-PEH) composed of a mass block, a piezoelectric patch, and a cantilever beam, we replaced the mass block by a magnet array and added a coil array to form the hybrid energy harvester. To enhance the output power of the electromagnetic energy harvester (EMEH), we utilized an alternating magnet array. Then, to compare the power density of the hybrid harvester and BC-PEH, the experiments of output power were conducted. According to the experimental results, the power densities of the hybrid harvester and BC-PEH are, respectively, 3.53 mW/cm3 and 5.14 μW/cm3 under the conditions of 18.6 Hz and 0.3 g. Therefore, the power density of the hybrid harvester is 686 times as high as that of the BC-PEH, which verified the power density improvement of PEH via a hybridization scheme with EMEH. Additionally, the hybrid harvester exhibits better performance for charging capacitors, such as charging a 2.2 mF capacitor to 8 V within 17 s. It is of great significance to further develop self-powered devices.

Multimodal pizza-shaped piezoelectric vibration-based energy harvesters

2021 ◽  
pp. 1045389X2110069
Author(s):  
Virgilio J Caetano ◽  
Marcelo A Savi
Keyword(s):  
Energy Harvesting ◽  
Frequency Spectrum ◽  
Optimization Procedure ◽  
Single Mode ◽  
Ambient Vibration ◽  
Vibration Source ◽  
Element Analysis ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Harvesting Systems

Energy harvesting from ambient vibration through piezoelectric devices has received a lot of attention in recent years from both academia and industry. One of the main challenges is to develop devices capable of adapting to diverse sources of environmental excitation, being able to efficiently operate over a broadband frequency spectrum. This work proposes a novel multimodal design of a piezoelectric energy harvesting system to harness energy from a wideband ambient vibration source. Circular-shaped and pizza-shaped designs are employed as candidates for the device, comparing their performance with classical beam-shaped devices. Finite element analysis is employed to model system dynamics using ANSYS Workbench. An optimization procedure is applied to the system aiming to seek a configuration that can extract energy from a broader frequency spectrum and maximize its output power. A comparative analysis with conventional energy harvesting systems is performed. Numerical simulations are carried out to investigate the harvester performances under harmonic and random excitations. Results show that the proposed multimodal harvester has potential to harness energy from broadband ambient vibration sources presenting performance advantages in comparison to conventional single-mode energy harvesters.

Sign in / Sign up

Export Citation Format

Share Document