Flexible, Piezoelectric Aluminium-doped Zinc Oxide Energy Harvesters with Printed Electrodes for Wearable Applications

2021 ◽  
Vol 11 ◽  
Author(s):  
Muhammad Irsyad Suhaimi ◽  
Anis Nurashikin Nordin ◽  
Aliza Aini Md Ralib ◽  
Lai Ming Lim ◽  
Zambri Samsudin
Keyword(s):  
Zinc Oxide ◽  
Output Voltage ◽  
Energy Harvester ◽  
Wearable Sensors ◽  
Low Frequency ◽  
Design Parameters ◽  
Axis Orientation ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Cantilever Structure

Aims: Recent advancements in sensing technology and wireless communications have accelerated the development of the Internet of Things (IoT) which promote the usage of wearable sensors. An emerging trend is to develop self-sustainable wearable devices, thus eliminating the necessity of the user to carry bulky batteries. In this work, the development of a flexible piezoelectric energy harvester that is capable of harvesting energy from low frequency vibrations is presented. The target application of this energy harvester is for usage in smart shoes. Objectives: The objectives of this research is to design, fabricate and test an energy harvester on PET substrate using Aluminum Zinc Oxide as its piezoelectric layer. Methods: The energy harvester was designed as a cantilever structure using PET/AZO/Ag layers in d33 mode which can generate large output voltages with small displacements. The electrodes were designed as an interdigitated structure in which two significant design parameters were chosen, namely the effect of gap between electrodes, g and number of interdigital electrodes (IDE) pairs, N to the output voltage and resonant frequency. Results: The sputtered AZO on PET showed c-axis orientation at 002 peak with 2 values of 34.45° which indicates piezoelectric behaviour. The silver IDE pairs were screen-printed on the AZO thin film. Functionality of the device as an energy harvester was demonstrated by testing it using a shaker. The energy harvester was capable of generating 0.867 Vrms output voltage when actuated at 49.6 Hz vibrations. Conclusion: This indicates that the AZO thin films with printed silver electrodes can be used as flexible, d33 energy harvesters.

Broadband Rotational Energy Harvesting Using Micro Energy Harvester

2018 ◽  
Author(s):  
Jui-Ta Chien ◽  
Yung-Hsing Fu ◽  
Chao-Ting Chen ◽  
Shun-Chiu Lin ◽  
Yi-Chung Shu ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Output Voltage ◽  
Energy Harvester ◽  
Low Frequency ◽  
Rotational Energy ◽  
Open Circuit ◽  
Maximum Output ◽  
Rotational Excitation ◽  
Rotating Speed ◽  
Piezoelectric Energy

This paper proposes a broadband rotational energy harvesting setup by using micro piezoelectric energy harvester (PEH). When driven in different rotating speed, the PEH can output relatively high power which exhibits the phenomenon of frequency up-conversion transforming the low frequency of rotation into the high frequency of resonant vibration. It aims to power self-powered devices used in the applications, like smart tires, smart bearings, and health monitoring sensors on rotational machines. Through the excitation of the rotary magnetic repulsion, the cantilever beam presents periodically damped oscillation. Under the rotational excitation, the maximum output voltage and power of PEH with optimal impedance is 28.2 Vpp and 663 μW, respectively. The output performance of the same energy harvester driven in ordinary vibrational based excitation is compared with rotational oscillation under open circuit condition. The maximum output voltage under 2.5g acceleration level of vibration is 27.54 Vpp while the peak output voltage of 36.5 Vpp in rotational excitation (in 265 rpm).

Heartbeat Energy Harvesting Using the Fan-Folded Piezoelectric Beam Geometry

2015 ◽  
Author(s):  
M. H. Ansari ◽  
M. Amin Karami
Keyword(s):  
Natural Frequency ◽  
Energy Harvester ◽  
Low Frequency ◽  
Mode Shapes ◽  
Vibration Energy ◽  
Vibration Energy Harvester ◽  
Mechanical Coupling ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Piezoelectric Beam

A three dimensional piezoelectric vibration energy harvester is designed to generate electricity from heartbeat vibrations. The device consists of several bimorph piezoelectric beams stacked on top of each other. These horizontal bimorph beams are connected to each other by rigid vertical beams making a fan-folded geometry. One end of the design is clamped and the other end is free. One major problem in micro-scale piezoelectric energy harvesters is their high natural frequency. The same challenge is faced in development of a compact vibration energy harvester for the low frequency heartbeat vibrations. One way to decrease the natural frequency is to increase the length of the bimorph beam. This approach is not usually practical due to size limitations. By utilizing the fan-folded geometry, the natural frequency is decreased while the size constraints are observed. The required size limit of the energy harvester is 1 cm by 1 cm by 1 cm. In this paper, the natural frequencies and mode shapes of fan-folded energy harvesters are analytically derived. The electro-mechanical coupling has been included in the model for the piezoelectric beam. The design criteria for the device are discussed.

scholarly journals Performance Enhancement of a Multiresonant Piezoelectric Energy Harvester for Low Frequency Vibrations

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2770 ◽  
Author(s):  
Iman Izadgoshasb ◽  
Yee Lim ◽  
Ricardo Vasquez Padilla ◽  
Mohammadreza Sedighi ◽  
Jeremy Novak
Keyword(s):  
Cantilever Beam ◽  
Performance Enhancement ◽  
Low Frequency ◽  
Design Parameters ◽  
Vibration Source ◽  
Element Analysis ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Low Frequency Vibration ◽  
External Power Source

Harvesting electricity from low frequency vibration sources such as human motions using piezoelectric energy harvesters (PEH) is attracting the attention of many researchers in recent years. The energy harvested can potentially power portable electronic devices as well as some medical devices without the need of an external power source. For this purpose, the piezoelectric patch is often mechanically attached to a cantilever beam, such that the resonance frequency is predominantly governed by the cantilever beam. To increase the power generated from vibration sources with varying frequency, a multiresonant PEH (MRPEH) is often used. In this study, an attempt is made to enhance the performance of MRPEH with the use of a cantilever beam of optimised shape, i.e., a cantilever beam with two triangular branches. The performance is further enhanced through optimising the design of the proposed MRPEH to suit the frequency range of the targeted vibration source. A series of parametric studies were first carried out using finite-element analysis to provide in-depth understanding of the effect of each design parameters on the power output at a low frequency vibration. Selected outcomes were then experimentally verified. An optimised design was finally proposed. The results demonstrate that, with the use of a properly designed MRPEH, broadband energy harvesting is achievable and the efficiency of the PEH system can be significantly increased.

Low‐frequency nanocomposite piezoelectric energy harvester with embedded zinc oxide nanowires

2021 ◽  
Author(s):  
Mark Meschino ◽  
Lingyun Wang ◽  
Haitong Xu ◽  
Rasool Moradi‐Dastjerdi ◽  
Kamran Behdinan
Keyword(s):  
Zinc Oxide ◽  
Energy Harvester ◽  
Low Frequency ◽  
Zinc Oxide Nanowires ◽  
Oxide Nanowires ◽  
Piezoelectric Energy

Nonlinear Characteristics for Rotatable Magnetically Coupling Piezoelectric Energy Harvesters

2014 ◽  
Author(s):  
Junyi Cao ◽  
Shengxi Zhou ◽  
Daniel J. Inman
Keyword(s):  
Inclination Angle ◽  
Nonlinear Dynamic ◽  
Magnetic Force ◽  
Energy Harvester ◽  
Low Frequency ◽  
High Energy ◽  
Nonlinear Characteristics ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Frequency Excitation

This paper investigates the nonlinear dynamic characteristics of a magnetically coupled piezoelectric energy harvesters under low frequency excitation, where the angle of external magnetic field is adjustable. The nonlinear dynamic equation with the identified nonlinear magnetic force is derived to describe the electromechanical interaction of variable inclination angle harvesters. The effect of excitation amplitude and frequency on dynamic behavior is proposed by using the phase trajectory and bifurcation diagram. The numerical analysis shows that a rotatable magnetically coupling energy harvesting system exhibits rich nonlinear characteristics with the change of external magnet inclination angle. The nonlinear route to and from large amplitude high energy motion can be clearly observed. It is demonstrated numerically and experimentally that lumped parameters equations with an identified polynomials for magnetic force could adequately describe the characteristics of nonlinear energy harvester. The rotating magnetically coupled energy harvester possesses the usable frequency bandwidth over a wide range of low frequency excitation by adjusting the angular orientation.

scholarly journals Bandwidth Broadening of Piezoelectric Energy Harvesters Using Arrays of a Proposed Piezoelectric Cantilever Structure

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 973
Author(s):  
Marwa S. Salem ◽  
Shimaa Ahmed ◽  
Ahmed Shaker ◽  
Mohammad T. Alshammari ◽  
Kawther A. Al-Dhlan ◽  
...  
Keyword(s):  
Resonant Frequency ◽  
Piezoelectric Material ◽  
Output Power ◽  
Energy Harvester ◽  
Vibration Source ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Narrow Bandwidth ◽  
Cantilever Structure ◽  
Bandwidth Broadening

One of the most important challenges in the design of the piezoelectric energy harvester is its narrow bandwidth. Most of the input vibration sources are exposed to frequency variation during their operation. The piezoelectric energy harvester’s narrow bandwidth makes it difficult for the harvester to track the variations of the input vibration source frequency. Thus, the harvester’s output power and overall performance is expected to decline from the designed value. This current study aims to solve the problem of the piezoelectric energy harvester’s narrow bandwidth. The main objective is to achieve bandwidth broadening which is carried out by segmenting the piezoelectric material of the energy harvester into n segments; where n could be more than one. Three arrays with two, four, and six beams are shaped with two piezoelectric segments. The effect of changing the length of the piezoelectric material segment on the resonant frequency, output power, and bandwidth, as well as the frequency response is investigated. The proposed piezoelectric energy harvesters were implemented utilizing a finite element method (FEM) simulation in a MATLAB environment. The results show that increasing the number of array beams increases the output power and bandwidth. For the three-beam arrays, at n equals 2, 6 mW output power and a 9 Hz bandwidth were obtained. Moreover, the bandwidth of such arrays covered around 5% deviation from its resonant frequency. All structures were designed to operate as a steel wheel safety sensor which could be used in train tracks.

PZT Piezoelectric Energy Harvester Enhancement Using Slotted Aluminium Beam

2014 ◽  
Vol 1051 ◽  
pp. 932-936
Author(s):  
Mun Heng Lam ◽  
Hanim Salleh
Keyword(s):  
Energy Source ◽  
Renewable Energy Source ◽  
Lead Zirconate Titanate ◽  
Output Voltage ◽  
Energy Harvester ◽  
Lead Zirconate ◽  
External Beam ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Wide Range

This paper presents work on improving piezoelectric energy harvesters. Harvesting energy from vibrations has received massive attention due to it being a renewable energy source that has a wide range of applications. Over the years of development, there is always research to further improve and optimise piezoelectric energy harvesters. For this paper, the piezoelectric specimen is made of PZT (Lead Zirconate Titanate), brass reinforced and has 31.8mm length, 12.7mm width and 0.511mm thick. An external beam is implemented to provide deflection amplification which in turn increases the output of the energy harvester. Depending on the configuration of the external beam, it can amplify output voltage from 100% to 300%.

scholarly journals An E-shape broadband piezoelectric energy harvester induced by magnets

2018 ◽  
Vol 29 (11) ◽  
pp. 2477-2491 ◽  
Author(s):  
Qingqing Lu ◽  
Fabrizio Scarpa ◽  
Liwu Liu ◽  
Jinsong Leng ◽  
Yanju Liu
Keyword(s):  
Broad Spectrum ◽  
Output Voltage ◽  
Energy Harvester ◽  
Variation Principle ◽  
Frequency Bandwidth ◽  
Restoring Force ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Half Power ◽  
Tip Mass

We describe in this work a broadband magnetic E-shape piezoelectric energy harvester with wide frequency bandwidth. We develop first a nonlinear electromechanical model of the harvester based on the Hamilton variation principle that simulates the effect of the nonlinear magnetic restoring force at different spacing distances. The model is used to identify the distances existing between two different magnets that enable the system to perform with a specific nonlinearity. The performance of the E-shape piezoelectric energy harvester is also investigated through experiments, with E-shape energy harvesters at different spacing distances tested under several base acceleration excitations. We observe that the frequency domain output voltage of the system shows a general excellent controllable performance, with a widening of the frequency bandwidth. The half-power bandwidth of the linear energy harvester for a distance of 25 mm is 0.8 Hz only, which can be expanded to 2.67 Hz for the larger distance of 11 mm between magnets. The energy harvester presented in this work shows promising performances for broad-spectrum vibration excitations compared to conventional cantilever piezoelectric energy harvester systems with a tip mass.

Design, Analysis, and Experimental Studies of a Novel PVDF-Based Piezoelectric Energy Harvester With Beating Mechanisms

2014 ◽  
Author(s):  
Kuo-Shen Chen
Keyword(s):  
Natural Frequency ◽  
Energy Harvester ◽  
Piezoelectric Materials ◽  
Low Frequency ◽  
Major Barrier ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Low Frequency Vibration ◽  
High Efficient ◽  
The Future

Wireless sensor networks become increasingly important in modern life for structural health monitoring and other related applications. In these applications, due to their overall sensor populations and possible covered measurement areas, the replacement of batteries becomes a difficult and unrealistic task. As a result, energy harvesters to convert environment wasted vibration energy into electricity for powering those sensor nodes become important and many miniaturized device have been realized by using MEMS technology. In order to achieve optimal performance, the energy harvester must be operated at the resonance frequency. However, the vibration frequencies of environmental vibrations are usually much less than that of those miniaturizing energy harvesters and this fact could be a major barrier for energy harvesting performance. In this paper, a new piezoelectric energy scavenging concept is proposed and demonstrated to convert environmental vibrations into electricity. Unlike previous MEMS-based piezoelectric energy harvesters, which suffer from matching between environmental low frequency vibration and the much higher system natural frequency, this work proposes a novel beating design using polymer piezoelectric materials in collaborating with a beating mechanism. That is, by creating impact force via the low frequency vibration motion from the mechanism, it is possible to excite system natural frequency by the low frequency environmental vibrations and it is possible to operate the entire system at the natural frequency. This work contains details in presenting this idea, designing piezoelectric harvester systems with flexible PVDF elements, exploring their vibration characteristics, and energy accumulating strategies by using a capacitor with a full-bridged rectifiers or a boost conversion. By experimental characterization, the overall harvesting efficiency of the proposed design is much greater than that from the design without the beating mechanism. It indicates that the efficiency is significantly improved and the proposed translational design could potentially improve the future design approach for piezoelectric energy harvesters significantly. In summary, this preliminary study shows that it is a feasible scheme for the application of piezoelectric materials in harvesting electricity from environmental vibrations. Although this work is still in its initial phase, the results and conclusions of this work are still invaluable for guiding the development of high efficient piezoelectric harvesters in the future.

scholarly journals Design and Experimental Study of an L Shape Piezoelectric Energy Harvester

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
In-Ho Kim ◽  
Seon-Jun Jang ◽  
Hyung-Jo Jung
Keyword(s):  
Output Voltage ◽  
Energy Harvester ◽  
Performance Enhancement ◽  
Mechanical Strain ◽  
Electrical Energy ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Cantilevered Beam ◽  
Beam Type ◽  
Low Efficiency

Piezoelectric energy harvesters of cantilevered beam type are studied in various fields due to simplicity. In general, these systems obtain electrical energy from mechanical strain by bending of cantilevered beam. However, conventional systems have disadvantages that they have low efficiency in frequency regions other than resonance frequency. To overcome the limitations, various energy harvesters to apply performance enhancement strategies are proposed and investigated. In this paper, a frequency-changeable L shape energy harvester which is form connected cantilever beam and rigid arm is proposed and investigated. The conventional piezoelectric energy harvester exhibits the principal frequency in the simple bending mode whereas the proposed system features the twisting mode resulting in a higher output voltage than the conventional system. The proposed energy harvester is simplified to a two-degree-of-freedom model and its dynamics are described. How the length of a rigid bar affects its natural frequencies is also studied. To evaluate the performance of the system, experiments by using a vertical shaker and numerical simulation are carried out. As a result, it is shown that the natural frequency for a twisting mode decreases as the arm length increased, and the higher output voltage is generated comparing with those of the conventional energy harvester.

Sign in / Sign up

Export Citation Format

Share Document