Self-healing ability and adhesion strength of capsule embedded coatings—Micro and nano sized capsules containing linseed oil

2012 ◽  
Vol 75 (4) ◽  
pp. 292-300 ◽  
Author(s):  
S. Hatami Boura ◽  
M. Peikari ◽  
A. Ashrafi ◽  
M. Samadzadeh
Keyword(s):  
Adhesion Strength ◽  
Linseed Oil ◽  
Self Healing

Encapsulation of linseed oil in graphene oxide shells for preparation of self-healing composite coatings

2019 ◽  
Vol 129 ◽  
pp. 285-291 ◽  
Author(s):  
Jing Li ◽  
Zhenwei Li ◽  
Qingkang Feng ◽  
Hanxun Qiu ◽  
Guangzhi Yang ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Linseed Oil ◽  
Composite Coatings ◽  
Self Healing

scholarly journals Preparation and Properties of Self-Healing and Self-Lubricating Epoxy Coatings with Polyurethane Microcapsules Containing Bifunctional Linseed Oil

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1578 ◽  
Author(s):  
Haijuan Yang ◽  
Qiufeng Mo ◽  
Weizhou Li ◽  
Fengmei Gu
Keyword(s):  
Interfacial Polymerization ◽  
Electrochemical Impedance ◽  
Linseed Oil ◽  
Salt Spray ◽  
Average Diameter ◽  
Organic Coating ◽  
Epoxy Coating ◽  
The Self ◽  
Self Healing ◽  
Pure Epoxy

An organic coating is commonly used to protect metal from corrosion, but it is prone to failure due to microcracks generated by internal stress and external mechanical action. The self-healing and self-lubricating achieved in the coating is novel, which allows an extension of life by providing resistance to damage and repair after damage. In this study, a new approach to microencapsulating bifunctional linseed oil with polyurethane shell by interfacial polymerization. Moreover, the self-healing and self-lubricating coatings with different concentrations of microcapsules were developed. The well-dispersed microcapsules showed a regular spherical morphology with an average diameter of ~64.9 μm and a core content of 74.0 wt.%. The results of the salt spray test demonstrated that coatings containing microcapsules still possess anticorrosion, which is improved with the increase of microcapsules content, after being scratched. The results of electrochemical impedance spectroscopy showed a |Z|f=0.01Hz value of 104 Ω·cm2 for pure epoxy coating after being immersed for 3 days, whereas the coating with 20 wt.% microcapsules was the highest, 1010 Ω·cm2. The results of friction wear showed that the tribological performance of the coating was enhanced greatly as microcapsule concentration reached 10 wt.% or more, which showed a 86.8% or more reduction in the friction coefficient compared to the pure epoxy coating. These results indicated that the coatings containing microcapsules exhibited excellent self-healing and self-lubricating properties, which are positively correlated with microcapsules content.

Preparation and characterization of microcapsules containing linseed oil and its use in self-healing coatings

2008 ◽  
Vol 63 (1) ◽  
pp. 72-78 ◽  
Author(s):  
C. Suryanarayana ◽  
K. Chowdoji Rao ◽  
Dhirendra Kumar
Keyword(s):  
Linseed Oil ◽  
Self Healing

scholarly journals Fabrication of a Porous Slippery Icephobic Surface and Effect of Lubricant Viscosity on Anti-Icing Properties and Durability

Coatings ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 896
Author(s):  
Guoyong Liu ◽  
Yuan Yuan ◽  
Ruijin Liao ◽  
Liang Wang ◽  
Xue Gao
Keyword(s):  
Adhesion Strength ◽  
Silicone Oil ◽  
Al Alloy ◽  
Self Healing ◽  
Porous Films ◽  
Low Viscosity ◽  
Lower Viscosity ◽  
Healing Property ◽  
Promising Application ◽  
Ice Adhesion

A breakdown caused by the icing of power generation infrastructure is one of the serious disasters occurring in the power system. Slippery lubricant-infused porous surfaces (SLIPSs), whose ice adhesion strength is extremely low, have a promising application in the anti-icing field. In the present study, we fabricated SLIPSs with low ice adhesion strength by infusing silicone oil into an anodic aluminum oxide (AAO) substrate. In addition, the effects of the viscosity of silicone oil on the anti-icing properties and durability of the SLIPSs were investigated. The results show that a lower viscosity silicone oil brings about more slippery surfaces and lower ice adhesion strength. The ice adhesion strength was reduced by 99.3% in comparison with the bare Al alloy. However, low-viscosity silicone oil has worse de-icing resistance and heat resistance. Additionally, the porous films filled with low-viscosity silicone oil possess a better self-healing property after icing/de-icing cycles and followed by exposure to the atmosphere. When the viscosity of silicone oil is 50 mPa·s, the SLIPSs exhibit the best durability for anti-icing. Even after 21 de-icing tests or 168 h of heating at 90 °C, the ice adhesion strength still remains below 10% compared with that of bare Al. This work provides some useful advice for the design and fabrication of anti-icing SLIPSs.

scholarly journals GRAPHENE OXIDE MICROCAPSULES (GOMs) WITH LINSEED OIL CORE VIA PICKERING EMULSION METHOD: EFFECT OF DISPERSE SPEED

2021 ◽  
Vol 22 (1) ◽  
pp. 213-222
Author(s):  
Nurul Nadiah Sahir ◽  
Noor Azlina Hassan ◽  
Norita Binti Hassan ◽  
Norhasnidawani Binti Johari
Keyword(s):  
Graphene Oxide ◽  
Phase Separation ◽  
Linseed Oil ◽  
Pickering Emulsion ◽  
Optical Microscope ◽  
Coating System ◽  
Self Healing ◽  
Promising Candidate ◽  
Emulsion Method ◽  
Method Effect

Graphene oxide microcapsules (GOMs) have been prepared through Pickering emulsion method by varying the disperse speed to study its effect on the GOM’s size. The GOMs were characterized through phase separation observation, polarized optical microscope (POM), and particle size analyser (PSA). Phase separation observation showed more viscous and cloudy emulsion was produced when the disperse speed was increased. After 24 hours, only 800 rpm emulsion did not show any phase separation. POM characterization depicted that increasing the emulsification energy led to the finer emulsion with the 1200 rpm sample showing the smallest microcapsule size of around 8 ?m. However, PSA analysis suggested that although the disperse speed controls the GOMs size, the amount of GO in the emulsion plays an important role for the microcapsule to maintain its stability. Emulsion produced at 800 rpm possesses satisfactory stability with GOMs diameter of 11.15 ?m. The result also suggested that graphene oxide encapsulated linseed oil may act as a promising candidate for healing microcapsules in a self-healing coating system. ABSTRAK: Mikrokapsul graphene oksida (GOMs) telah dihasilkan melalui kaedah emulsifikasi Pickering dengan memvariasikan tenaga pengemulsi untuk mengkaji kesannya terhadap saiz GOMs. GOMs dicirikan melalui pemerhatian pemisahan fasa, mikroskop optik polarisasi (POM) dan penganalisis saiz zarah (PSA). Pemerhatian pemisahan fasa menunjukkan emulsi yang lebih likat dan keruh dihasilkan apabila kelajuan pengemulsi meningkat. Selepas 24 jam, hanya emulsi 800 rpm tidak menunjukkan pemisahan fasa. Pencirian POM meunjukkan bahawa peningkatan tenaga pengemulsi menghasilkan emulsi yang lebih halus dengan sampel 1200 rpm menunjukkan saiz mikrokapsul terkecil, sekitar 8 ?m. Walau bagaimanapun, analisis PSA mencadangkan bahawa walaupun kelajuan pengemulsi mengawal saiz GOMs, jumlah GO dalam emulsi memainkan peranan penting untuk mengekalkan kestabilan mikrokapsul. Emulsi yang dihasilkan pada 800 rpm mempunyai kestabilan yang memuaskan dengan purata saiz GOMs sekitar 11.15 ?m. Berdasarkan dapatan kajian, graphene oksida yang terkandung minyak biji rami boleh menjadi salah satu mikrokapsul penyembuh dalam sistem cat auto-sembuh.

scholarly journals Self-Healing Performance of Multifunctional Polymeric Smart Coatings

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1519 ◽  
Author(s):  
Sehrish Habib ◽  
Adnan Khan ◽  
Muddasir Nawaz ◽  
Mostafa Sliem ◽  
Rana Shakoor ◽  
...  
Keyword(s):  
Electrochemical Impedance ◽  
Linseed Oil ◽  
Steel Substrate ◽  
Urea Formaldehyde ◽  
Nanocomposite Coatings ◽  
Self Healing ◽  
Ph Change ◽  
Polymeric Nanocomposite ◽  
Smart Coatings ◽  
Healing Agent

Multifunctional nanocomposite coatings were synthesized by reinforcing a polymeric matrix with halloysite nanotubes (HNTs) loaded with corrosion inhibitor (NaNO3) and urea formaldehyde microcapsules (UFMCs) encapsulated with a self-healing agent (linseed oil (LO)). The developed polymeric nanocomposite coatings were applied on the polished mild steel substrate using the doctor’s blade technique. The structural (FTIR, XPS) and thermogravimetric (TGA) analyses reveal the loading of HNTs with NaNO3 and encapsulation of UFMCs with linseed oil. It was observed that self-release of the inhibitor from HNTs in response to pH change was a time dependent process. Nanocomposite coatings demonstrate decent self-healing effects in response to the external controlled mechanical damage. Electrochemical impedance spectroscopic analysis (EIS) indicates promising anticorrosive performance of novel nanocomposite coatings. Observed corrosion resistance of the developed smart coatings may be attributed to the efficient release of inhibitor and self-healing agent in response to the external stimuli. Polymeric nanocomposite coatings modified with multifunctional species may offer suitable corrosion protection of steel in the oil and gas industry.

Sign in / Sign up

Export Citation Format

Share Document