scholarly journals Optimizing the metastability of high-strength ultrafine grained microstructure from large strain machining

2021 ◽  
Vol 55 ◽  
pp. 247-252
Author(s):  
Sepideh Abolghasem ◽  
Luis Felipe Hernández Rivera ◽  
Shashank Shekhar
Keyword(s):  
Large Strain ◽  
High Strength ◽  
Ultrafine Grained ◽  
Ultrafine Grained Microstructure

Recrystallization Mechanisms in Severely Deformed Dual-Phase Stainless Steel

2010 ◽  
Vol 638-642 ◽  
pp. 1905-1910 ◽  
Author(s):  
Andrey Belyakov ◽  
Rustam Kaibyshev ◽  
Yuuji Kimura ◽  
Kaneaki Tsuzaki
Keyword(s):  
Stainless Steel ◽  
Large Strain ◽  
Austenite Phase ◽  
The Other ◽  
Dual Phase ◽  
Austenite Stainless Steel ◽  
Ultrafine Grained ◽  
Continuous Recrystallization ◽  
Ultrafine Grained Microstructure ◽  
Structural Recrystallization

The structural recrystallization mechanisms operating in an Fe – 27%Cr – 9% Ni dual-phase (ferrite-austenite) stainless steel after large strain processing to total strain of 4.4 were investigated in the temperature range of 400-700oC. The severe deformation resulted in the development of an ultrafine grained microstructure consisting of highly elongated grains/subgrains with transverse dimensions of 160 nm and 130 nm in ferrite and austenite, respectively. The annealing mechanism operating in ferrite phase was considered as continuous recrystallization, which involved recovery leading to the development of essentially polygonized microstructure. On the other hand, the mechanism of discontinuous nucleation took place at an early recrystallization stage in austenite phase.

High-strength ultrafine-grained titanium 99.99 manufactured by large strain plastic working

2019 ◽  
Vol 55 (11) ◽  
pp. 4910-4925 ◽  
Author(s):  
Krzysztof Topolski ◽  
Bogusława Adamczyk-Cieślak ◽  
Halina Garbacz
Keyword(s):  
Large Strain ◽  
High Strength ◽  
Plastic Working ◽  
Ultrafine Grained

Mechanical Properties of Ultrafine Grained Steels Processed by Large Strain-High Z Deformation - A Review

2009 ◽  
Vol 633-634 ◽  
pp. 211-221 ◽  
Author(s):  
S.V.S. Narayana Murty ◽  
Shiro Torizuka
Keyword(s):  
Mechanical Properties ◽  
Large Strain ◽  
High Strength ◽  
Extensive Study ◽  
Engineering Structures ◽  
Ultrafine Grained ◽  
Structural Applications ◽  
Comprehensive Picture ◽  
Processing Techniques ◽  
Near Future

Ultrafine-grained steels with a grain size of about one micron offer the prospect of high strength coupled with high toughness among conventional steel compositions and are attracting the attention of researchers worldwide. Application of these ultrafine-grained steels to potential engineering structures demands extensive study of their mechanical properties. While there are many studies on the development of ultrafine-grained microstructures through various deformation processing techniques on a spectrum of compositions, fewer studies were reported on the more important aspect of evaluating their mechanical properties. This is to verify the basic assumption that the microstructural refinement at bulk level indeed improves the mechanical properties offering the prospect of a realistic replacement of the existing conventional steels in the near future. As we move towards the ultimate goal of applying these advanced high strength materials, this review article attempts to present a comprehensive picture on the mechanical properties of ultrafine-grained steels with varying carbon contents fabricated by large strain warm deformation. Finally, it is believed that time is ripe for exploring the possible applications of these materials for structural applications.

Mechanical Properties and Aging Behavior of Ultrafine Grained Al-Ag Alloy Fabricated by Accumulative Roll-Bonding

2014 ◽  
Vol 794-796 ◽  
pp. 851-856
Author(s):  
Tadashiege Nagae ◽  
Nobuhiro Tsuji ◽  
Daisuke Terada
Keyword(s):  
Mechanical Properties ◽  
Grain Refinement ◽  
Accumulative Roll Bonding ◽  
Precipitation Hardening ◽  
Tensile Elongation ◽  
Solution Treatment ◽  
High Strength ◽  
Subsequent Aging ◽  
Roll Bonding ◽  
Ultrafine Grained

Accumulative roll-bonding (ARB) process is one of the severe plastic deformation processes for fabricating ultrafine grained materials that exhibit high strength. In aluminum alloys, aging heat treatment has been an important process for hardening materials. In order to achieve good mechanical properties through the combination of grain refinement hardening and precipitation hardening, an Al-4.2wt%Ag binary alloy was used in the present study. After a solution treatment at 550°C for 1.5hr, the alloy was severely deformed by the ARB process at room temperature (RT) up to 6 cycles (equivalent strain of 4.8). The specimens ARB-processed by various cycles (various strains) were subsequently aged at 100, 150, 200, 250°C, and RT. The hardness of the solution treated (ST) specimen increased by aging. On the other hand, hardness of the ARB processed specimen decreased after aging at high temperatures such as 250°C. This was probably due to coarsening of precipitates or/and matrix grains. The specimen aged at lower temperature showed higher hardness. The maximum harnesses achieved by aging for the ST specimen, the specimens ARB processed by 2 cycles, 4 cycles and 6 cycles were 55HV, 71HV, 69HV and 65HV, respectively. By tensile tests it was shown that the strength increased by the ARB process though the elongation decreased significantly. However, it was found that the tensile elongation of the ARB processed specimens was improved by aging without sacrificing the strength. The results suggest that the Al-Ag alloy having large elongation as well as high strength can be realized by the combination of the ARB process for grain refinement and the subsequent aging for precipitation hardening.

Melt Modification and Microstructure Homogeneity of Solidified TiC-TiB2 Composites Prepared by Combustion Synthesis in Ultrahigh Gravity Field

2013 ◽  
Vol 833 ◽  
pp. 125-129
Author(s):  
Hao Zhang ◽  
Zhong Min Zhao ◽  
Long Zhang ◽  
Shuan Jie Wang
Keyword(s):  
Gravity Field ◽  
Combustion Synthesis ◽  
Stokes Flow ◽  
High Energy ◽  
Adiabatic Temperature ◽  
Full Density ◽  
Reactive System ◽  
Refined Microstructure ◽  
Ultrafine Grained ◽  
Ultrafine Grained Microstructure

By introducing (CrO3+Al) high-energy thermit into (Ti+B4C) system and designing adiabatic temperature of reactive system as 3000°C,3200°C, 3400°C, 3600°C and 3800°C respectively, a series of solidified TiC-TiB2were prepared by combustion synthesis in ultrahigh gravity field with the acceleration 2000 g. XRD, FESEM and EDS results showed that the solidified TiCTiB2were composed of a number of TiB2primary platelets, irregular TiC secondary grains, and a few of isolated Al2O3inclusions and Cr-based alloy. Because of the enhanced Stokes flow in mixed melt with the increased adiabatic temperature, Al2O3droplets were promoted to float up and separate from TiC-TiB2-Me liquid while constitutional distribution became more and more uniform in TiC-TiB2-Me liquid, resulting in not only the sharply-reduced Al2O3inclusions in the solidified ceramic but also the refined microstructure and the improved homogeneity in the ceramic, and ultrafine-grained microstructure with a average thickness of TiB2platelets smaller than 1μm began to appear in near-full-density ceramic as the adiabatic temperature exceeded 3600°C, so the densification, fracture toughness and flexural strength of the ceramic were enhanced with the increased adiabatic temperature of the reactive system.

scholarly journals Tempforming as an Advanced Processing Method for Carbon Steels

Metals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1566
Author(s):  
Anastasiya Dolzhenko ◽  
Rustam Kaibyshev ◽  
Andrey Belyakov
Keyword(s):  
Impact Toughness ◽  
Crack Propagation ◽  
Large Strain ◽  
High Strength ◽  
Close Relation ◽  
Carbon Steels ◽  
Processing Method ◽  
Propagation Mode ◽  
Displacement Curve ◽  
The Impact

The microstructural mechanisms providing delamination toughness in high-strength low-alloyed steels are briefly reviewed. Thermo-mechanical processing methods improving both the strength and impact toughness are described, with a close relation to the microstructures and textures developed. The effect of processing conditions on the microstructure evolution in steels with different carbon content is discussed. Particular attention is paid to tempforming treatment, which has been recently introduced as a promising processing method for high-strength low-alloyed steel semi-products with beneficial combination of strength and impact toughness. Tempforming consists of large strain warm rolling following tempering. In contrast to ausforming, the steels subjected to tempforming may exhibit an unusual increase in the impact toughness with a decrease in test temperature below room temperature. This phenomenon is attributed to the notch blunting owing to easy splitting (delamination) crosswise to the principle crack propagation. The relationships between the crack propagation mode, the delamination fracture, and the load-displacement curve are presented and discussed. Further perspectives of tempforming applications and promising research directions are outlined.

scholarly journals Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility

2015 ◽  
Vol 112 (47) ◽  
pp. 14501-14505 ◽  
Author(s):  
Xiaolei Wu ◽  
Muxin Yang ◽  
Fuping Yuan ◽  
Guilin Wu ◽  
Yujie Wei ◽  
...  
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
High Strength ◽  
Back Stress ◽  
Coarse Grained ◽  
Ultrafine Grain ◽  
Asymmetric Rolling ◽  
Dislocation Hardening ◽  
Ultrafine Grained ◽  
Lamella Structure

Grain refinement can make conventional metals several times stronger, but this comes at dramatic loss of ductility. Here we report a heterogeneous lamella structure in Ti produced by asymmetric rolling and partial recrystallization that can produce an unprecedented property combination: as strong as ultrafine-grained metal and at the same time as ductile as conventional coarse-grained metal. It also has higher strain hardening than coarse-grained Ti, which was hitherto believed impossible. The heterogeneous lamella structure is characterized with soft micrograined lamellae embedded in hard ultrafine-grained lamella matrix. The unusual high strength is obtained with the assistance of high back stress developed from heterogeneous yielding, whereas the high ductility is attributed to back-stress hardening and dislocation hardening. The process discovered here is amenable to large-scale industrial production at low cost, and might be applicable to other metal systems.

Sign in / Sign up

Export Citation Format

Share Document