scholarly journals Effects of gamma radiation on the impact strength of polypropylene (PP)/high density polyethylene (HDPE) blends

2019 ◽  
Vol 12 ◽  
pp. 2169-2174 ◽  
Author(s):  
Wenzhao Wang ◽  
Xiaochao Zhang ◽  
Zongyuan Mao ◽  
Weiquan Zhao
Keyword(s):  
Impact Strength ◽  
Gamma Radiation ◽  
High Density Polyethylene ◽  
High Density ◽  
The Impact

Evaluation of the Aging Behavior of High Density Polyethylene in Thermal Oxidative Environment by Principal Component Analysis

2017 ◽  
Vol 727 ◽  
pp. 447-449 ◽  
Author(s):  
Jun Dai ◽  
Hua Yan ◽  
Jian Jian Yang ◽  
Jun Jun Guo
Keyword(s):  
Principal Component Analysis ◽  
Impact Strength ◽  
High Density Polyethylene ◽  
Tensile Modulus ◽  
Principal Component ◽  
Component Analysis ◽  
High Density ◽  
Aging Behavior ◽  
Data Set ◽  
The Impact

To evaluate the aging behavior of high density polyethylene (HDPE) under an artificial accelerated environment, principal component analysis (PCA) was used to establish a non-dimensional expression Z from a data set of multiple degradation parameters of HDPE. In this study, HDPE samples were exposed to the accelerated thermal oxidative environment for different time intervals up to 64 days. The results showed that the combined evaluating parameter Z was characterized by three-stage changes. The combined evaluating parameter Z increased quickly in the first 16 days of exposure and then leveled off. After 40 days, it began to increase again. Among the 10 degradation parameters, branching degree, carbonyl index and hydroxyl index are strongly associated. The tensile modulus is highly correlated with the impact strength. The tensile strength, tensile modulus and impact strength are negatively correlated with the crystallinity.

Development of Eco-Friendly Flame-Retarded High Density Polyethylene Composites

2020 ◽  
Vol 847 ◽  
pp. 55-60
Author(s):  
Yeng Fong Shih ◽  
Wan Ling Tsai ◽  
Venkata Krishna Kotharangannagari
Keyword(s):  
Impact Strength ◽  
Flame Retardant ◽  
Coupling Agent ◽  
High Density Polyethylene ◽  
Silane Coupling Agent ◽  
High Density ◽  
Silane Coupling ◽  
Surface Modified ◽  
The Impact ◽  
Modified Diatomite

The use of ammonium polyphosphate (APP) and expanded graphite (EG) as a flame retardant for polymer generally requires a relatively high amount of addition to achieve a flame-retardant effect, and is liable to cause a decrease in strength of the material. Therefore, in this study waste diatomite was used as an eco-friendly flame-retardant for high density polyethylene (HDPE) to reduce the amount of APP and EG and can reach the flame-retardant level. Moreover, the waste diatomite was heat treatment and surface modified by silane coupling agent to improve its compatibility with HDPE. The results show that the tensile strength of the HDPE drops sharply after the addition of the APP and EG. However, replace some of the APP and EG by the modified diatomite can slow down the decline and maintain the basic physical properties of the material. The impact strength of HDPE was also decreased by the addition of APP, EG and untreated diatomite. However, the impact strength of HDPE was increased after adding the surface modified diatomite. It can be seen from the experimental results that the addition of the waste diatomite modified by the silane coupling agent can reduce the usage of the flame retardant such as APP and EG, and increase the strength by increasing the compatibility between the plastic and the inorganic material. Moreover, this eco-friendly formulation can reach the UL-94 HB level, and it can be applied to interior decoration or as building materials in the future. Thus, it can not only recycle the wastes, but also reduce the threat caused by fire.

Effect of Compatibilizers on Mechanical and Thermal Properties of High Density Polyethylene Filled with Bio-Filler from Eggshell

2013 ◽  
Vol 699 ◽  
pp. 57-62
Author(s):  
Wanikorn Buakaew ◽  
Ruksakulpiwat Yupaporn ◽  
Nitinat Suppakarn ◽  
Wimonlak Sutapun
Keyword(s):  
Thermal Properties ◽  
Maleic Anhydride ◽  
Impact Strength ◽  
High Density Polyethylene ◽  
Average Particle Size ◽  
High Density ◽  
Degree Of Crystallinity ◽  
Average Particle ◽  
Mechanical And Thermal Properties ◽  
The Impact

In this research work, the effect of compatibilizers on mechanical and thermal properties of ESP/HDPE composites was investigated. High density polyethylene grafted with maleic anhydride (HDPE-g-MA) and ethylene propylene rubber grafted with maleic anhydride (EPR-g-MA) were used to compatibilize the ESP/HDPE composites. The ESP/HDPE composite with and without the compatibilizes was prepared at 20 wt.% ESP. The volume average particle size of ESP was 20.35 µm. The compatibilized HDPE composites were prepared at 2, 5, 8 and 10 wt.% of HDPE-g-MA and at 2, 5, 8 and 10 wt.% of EPR-g-MA, as well. It was found that ultimate stress, yield strength, and elongation at break of the ESP/HDPE composites prepared with HDPE-g-MA increased with increasing HDPE-g-MA content. In addition, Young’s modulus was maximum at 8 wt.% HDPE-g-MA. The composites filled with HDPE-g-MA had improved impact strength with increasing HDPE-g-MA content. On the other hand, the composites with EPR-g-MA showed a decrease in tensile properties and impact strength when increasing EPR-g-MA content. The impact strength of the HDPE composites compatibilized with EPR-g-MA decreased with increasing EPR-g-MA content. In addition, degree of crystallinity of the composites with EPR-g-MA was higher than that of the composite with HDPE-g-MA. Furthermore, compatibilizing ESP/HDPE composites with either HDPE-g-MA or EPR-g-MA did not influence HDPE and ESP decomposition temperatures, HDPE melting temperature and HDPE crystallization temperature.

scholarly journals Structures and impact strength variation of chemically crosslinked high-density polyethylene: effect of crosslinking density

RSC Advances ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 6791-6797
Author(s):  
Yueqing Ren ◽  
Xiaojie Sun ◽  
Lanlan Chen ◽  
Yafei Li ◽  
Miaomiao Sun ◽  
...  
Keyword(s):  
Low Temperature ◽  
Impact Strength ◽  
High Density Polyethylene ◽  
Crosslinking Density ◽  
High Density ◽  
Strength Variation

Crosslinking significantly improves the toughness and impact strength of HDPE and extends its application, especially at low temperature.

Effect of inorganic nanofillers on the impact behavior and fracture probability of industrial high-density polyethylene nanocomposite

2017 ◽  
Vol 52 (18) ◽  
pp. 2431-2442 ◽  
Author(s):  
Harun Sepet ◽  
Necmettin Tarakcioglu ◽  
RDK Misra
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Density Polyethylene ◽  
Fracture Probability ◽  
High Density ◽  
Impact Behavior ◽  
Inorganic Filler ◽  
Melt Mixing ◽  
The Impact ◽  
Scanning Electron

The main purpose of this work is to study how the morphology of nanofillers and dispersion and distribution level of inorganic nanofiller influence the impact behavior and fracture probability of inorganic filler filled industrial high-density polyethylene nanocomposites. For this study, nanoclay and nano-CaCO3 fillers–high-density polyethylene mixings (0, 1, 3, 5 wt.% high-density polyethylene) was prepared by melt-mixing method using a compounder system. The impact behavior was examined by charpy impact test, scanning electron microscopy, and probability theory and statistics. The level of the dispersion was characterized with scanning electron microscopy energy dispersive X-ray spectroscopy analysis. The results showed rather good dispersion of both of inorganic nanofiller, with a mixture of exfoliated and confined morphology. The results indicated that the impact strength of the industrial nanocomposite decreased with the increase of inorganic particulate content. The impact reliability of the industrial nanocomposites depends on the type of nanofillers and their dispersion and distribution in the matrix.

Gamma radiation curing of nitrile rubber/high density polyethylene blends

2012 ◽  
Vol 293 (3) ◽  
pp. 941-947 ◽  
Author(s):  
E. Elshereafy ◽  
Maysa A. Mohamed ◽  
M. M. EL-Zayat ◽  
A. A. El Miligy
Keyword(s):  
Gamma Radiation ◽  
High Density Polyethylene ◽  
Nitrile Rubber ◽  
High Density ◽  
Radiation Curing ◽  
Polyethylene Blends

Impact Strength of High Density Solid-State Microcellular Polycarbonate Foams

2000 ◽  
Vol 123 (2) ◽  
pp. 229-233 ◽  
Author(s):  
Chris Barlow ◽  
Vipin Kumar ◽  
Brian Flinn ◽  
Rajendra K. Bordia ◽  
John Weller
Keyword(s):  
Solid State ◽  
Impact Strength ◽  
Cell Size ◽  
High Density ◽  
Gas Content ◽  
Impact Behavior ◽  
Strong Function ◽  
Impact Tests ◽  
Izod Impact ◽  
The Impact

The effect of density (relative densities 0.33 to 0.90) on the impact behavior of microcellular polycarbonate (PC) was investigated. Cell size and foaming gas content were also considered. Flexed-beam Izod impact tests were conducted and the impact strength of these foams appears to be a strong function of both density and cell size. The impact strength was observed to improve over the unprocessed polycarbonate’s impact strength for foams with relative densities of 60 percent and above. In terms of cell size, the impact strength increased with increasing cell size at a given density.

Effect of particulate fillers on natural rubber/high-density polyethylene blends for roofing application

2020 ◽  
pp. 096739112093461
Author(s):  
WVWH Wickramaarachchi ◽  
S Walpalage ◽  
SM Egodage
Keyword(s):  
Impact Strength ◽  
Natural Rubber ◽  
High Density Polyethylene ◽  
Thermoplastic Elastomer ◽  
Cost Effective ◽  
Barium Sulphate ◽  
Filler Loading ◽  
High Density ◽  
Melt Mixing ◽  
Excellent Property

Blending of two or more polymers generates a new material, which is more cost-effective than a newly synthesised material. Blending-type thermoplastic elastomer (TPE) is produced by melt-mixing of a thermoplastic with a rubber. These blends have high demands associated with excellent property combinations of the parent materials. Particulate fillers are used in the rubber and plastic industry for property modification and cost reduction. In this work, six particulate fillers, namely, calcium carbonate, barium sulphate (BaSO4), kaolin, talc, Snobrite clay and dolomite were used to develop natural rubber (NR)/high-density polyethylene (HDPE) TPE blends, and the most suitable filler for roofing application was identified. A series of NR/HDPE 20/80 blends were prepared by varying filler loading from 10 phr to 30 phr at 10 phr intervals using a Plasticorder. Mechanical properties, such as tensile strength, hardness, impact strength and tear strength, and gel content of the blends were investigated. The addition of talc, dolomite and kaolin to NR/HDPE blend showed reduced impact strength, which is the most important property for a roofing application. The other three fillers showed improved impact strength at specific loadings. The blend with 30 phr of BaSO4 was identified as the best blend, as per the overall performance.

Sign in / Sign up

Export Citation Format

Share Document