Effect of particulate fillers on natural rubber/high-density polyethylene blends for roofing application

2020 ◽  
pp. 096739112093461
Author(s):  
WVWH Wickramaarachchi ◽  
S Walpalage ◽  
SM Egodage
Keyword(s):  
Impact Strength ◽  
Natural Rubber ◽  
High Density Polyethylene ◽  
Thermoplastic Elastomer ◽  
Cost Effective ◽  
Barium Sulphate ◽  
Filler Loading ◽  
High Density ◽  
Melt Mixing ◽  
Excellent Property

Blending of two or more polymers generates a new material, which is more cost-effective than a newly synthesised material. Blending-type thermoplastic elastomer (TPE) is produced by melt-mixing of a thermoplastic with a rubber. These blends have high demands associated with excellent property combinations of the parent materials. Particulate fillers are used in the rubber and plastic industry for property modification and cost reduction. In this work, six particulate fillers, namely, calcium carbonate, barium sulphate (BaSO4), kaolin, talc, Snobrite clay and dolomite were used to develop natural rubber (NR)/high-density polyethylene (HDPE) TPE blends, and the most suitable filler for roofing application was identified. A series of NR/HDPE 20/80 blends were prepared by varying filler loading from 10 phr to 30 phr at 10 phr intervals using a Plasticorder. Mechanical properties, such as tensile strength, hardness, impact strength and tear strength, and gel content of the blends were investigated. The addition of talc, dolomite and kaolin to NR/HDPE blend showed reduced impact strength, which is the most important property for a roofing application. The other three fillers showed improved impact strength at specific loadings. The blend with 30 phr of BaSO4 was identified as the best blend, as per the overall performance.

Palm Kernel Shell Filled Recycled High-Density Polyethylene: Effect of Filler Loading

2016 ◽  
Vol 857 ◽  
pp. 191-195 ◽  
Author(s):  
A. Nadiatul Husna ◽  
Bee Ying Lim ◽  
H. Salmah ◽  
Chun Hong Voon
Keyword(s):  
Thermal Stability ◽  
High Density Polyethylene ◽  
Thermo Gravimetric Analysis ◽  
Palm Kernel ◽  
Filler Loading ◽  
High Density ◽  
Gravimetric Analysis ◽  
Melt Mixing ◽  
Palm Kernel Shell ◽  
Thermal Stability Of

Palm kernel shells (PKS) filled recycled high density polyethylene (rHDPE) biocomposites were produced using melt mixing. The biocomposites were prepared on Brabender Plasticorder at temperature of 185 °C and rotor speed of 50 rpm by varying filler loading (0 to 40 phr). In this study, the effect of PKS loading on rheological properties and thermal stability of rHDPE/PKS were investigated. Rheological study of the biocomposites was carried out by means of capillary rheometer under temperature of 190 °C, 200 °C and 210 °C. Thermal properties of biocomposites were studied by using thermo gravimetric analysis (TGA). The rheological results showed that the flowability of the composite increased with increasing temperature. Meanwhile, the result of TGA showed that at higher PKS loading, rHDPE/PKS biocomposites had lower total weight loss. The thermal stability of the biocomposites was reduced due to the addition of filler loading.

Properties and recyclability of thermoplastic elastomer prepared from natural rubber powder (NRP) and high density polyethylene (HDPE)

2010 ◽  
Vol 29 (3) ◽  
pp. 346-351 ◽  
Author(s):  
Pongdhorn Sae-Oui ◽  
Chakrit Sirisinha ◽  
Promsak Sa-nguanthammarong ◽  
Puchong Thaptong
Keyword(s):  
Natural Rubber ◽  
High Density Polyethylene ◽  
Thermoplastic Elastomer ◽  
High Density ◽  
Rubber Powder

scholarly journals Graphene oxide modification for enhancing high-density polyethylene properties: a comparison between solvent reaction and melt mixing

2018 ◽  
Vol 39 (1) ◽  
pp. 85-93
Author(s):  
Antimo Graziano ◽  
Shaffiq Jaffer ◽  
Mohini Sain
Keyword(s):  
Graphene Oxide ◽  
High Density Polyethylene ◽  
High Performance ◽  
Stress Transfer ◽  
Cost Effective ◽  
Industrial Applications ◽  
High Density ◽  
Strong Interactions ◽  
Melt Mixing ◽  
Functionalized Graphene Oxide

Abstract Graphene oxide (GO) was chemically modified in xylene with dodecyl amine and hydrazine monohydrate to obtain reduced functionalized graphene oxide (RFGO). Composites of high-density polyethylene (HDPE) and GO were made via solvent reaction, whereas both melt mixing and solvent reaction were used for HDPE-RFGO composites for comparison purposes. Elemental and thermal analysis showed the success of GO modification in grafting amine functionalities onto its structure and restoring most of the original graphene C=C bonds. A significant increase in mechanical properties, thermal stability, and crystallization behavior was observed for HDPE-RFGO (solvent) compared with HDPE and HDPE-GO, proving that homogeneous dispersion of RFGO in the polymer matrix and strong interactions between them resulted in facilitated stress transfer, delayed thermal degradation, and more efficient nucleating effect in inducing the crystal growth of HDPE. A comparison of HDPE-RFGO properties enhancement between the melt mixing method and the solvent reaction method showed that, apart from mechanical behavior, the RFGO contribution was the same, suggesting that the optimization of the ecofriendlier approach (melt) could eventually lead to its total use for the mass production of high-performance, cost-effective, and more environmentally friendly graphene-based thermoplastic polyolefin nanocomposites suitable for highly demanding industrial applications.

Evaluation of the Aging Behavior of High Density Polyethylene in Thermal Oxidative Environment by Principal Component Analysis

2017 ◽  
Vol 727 ◽  
pp. 447-449 ◽  
Author(s):  
Jun Dai ◽  
Hua Yan ◽  
Jian Jian Yang ◽  
Jun Jun Guo
Keyword(s):  
Principal Component Analysis ◽  
Impact Strength ◽  
High Density Polyethylene ◽  
Tensile Modulus ◽  
Principal Component ◽  
Component Analysis ◽  
High Density ◽  
Aging Behavior ◽  
Data Set ◽  
The Impact

To evaluate the aging behavior of high density polyethylene (HDPE) under an artificial accelerated environment, principal component analysis (PCA) was used to establish a non-dimensional expression Z from a data set of multiple degradation parameters of HDPE. In this study, HDPE samples were exposed to the accelerated thermal oxidative environment for different time intervals up to 64 days. The results showed that the combined evaluating parameter Z was characterized by three-stage changes. The combined evaluating parameter Z increased quickly in the first 16 days of exposure and then leveled off. After 40 days, it began to increase again. Among the 10 degradation parameters, branching degree, carbonyl index and hydroxyl index are strongly associated. The tensile modulus is highly correlated with the impact strength. The tensile strength, tensile modulus and impact strength are negatively correlated with the crystallinity.

scholarly journals Structures and impact strength variation of chemically crosslinked high-density polyethylene: effect of crosslinking density

RSC Advances ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 6791-6797
Author(s):  
Yueqing Ren ◽  
Xiaojie Sun ◽  
Lanlan Chen ◽  
Yafei Li ◽  
Miaomiao Sun ◽  
...  
Keyword(s):  
Low Temperature ◽  
Impact Strength ◽  
High Density Polyethylene ◽  
Crosslinking Density ◽  
High Density ◽  
Strength Variation

Crosslinking significantly improves the toughness and impact strength of HDPE and extends its application, especially at low temperature.

Effect of inorganic nanofillers on the impact behavior and fracture probability of industrial high-density polyethylene nanocomposite

2017 ◽  
Vol 52 (18) ◽  
pp. 2431-2442 ◽  
Author(s):  
Harun Sepet ◽  
Necmettin Tarakcioglu ◽  
RDK Misra
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Density Polyethylene ◽  
Fracture Probability ◽  
High Density ◽  
Impact Behavior ◽  
Inorganic Filler ◽  
Melt Mixing ◽  
The Impact ◽  
Scanning Electron

The main purpose of this work is to study how the morphology of nanofillers and dispersion and distribution level of inorganic nanofiller influence the impact behavior and fracture probability of inorganic filler filled industrial high-density polyethylene nanocomposites. For this study, nanoclay and nano-CaCO3 fillers–high-density polyethylene mixings (0, 1, 3, 5 wt.% high-density polyethylene) was prepared by melt-mixing method using a compounder system. The impact behavior was examined by charpy impact test, scanning electron microscopy, and probability theory and statistics. The level of the dispersion was characterized with scanning electron microscopy energy dispersive X-ray spectroscopy analysis. The results showed rather good dispersion of both of inorganic nanofiller, with a mixture of exfoliated and confined morphology. The results indicated that the impact strength of the industrial nanocomposite decreased with the increase of inorganic particulate content. The impact reliability of the industrial nanocomposites depends on the type of nanofillers and their dispersion and distribution in the matrix.

scholarly journals In-Situ Synthesis and Property Evaluation of High-Density Polyethylene Reinforced Groundnut Shell Particulate Composite

2021 ◽  
Vol 6 (4) ◽  
pp. 305-311
Author(s):  
Abdulmumin Adebisi ◽  
Tajudeen Mojisola ◽  
Umar Shehu ◽  
Muhammed Sani Adam ◽  
Yusuf Abdulaziz
Keyword(s):  
Tensile Strength ◽  
Water Absorption ◽  
Impact Energy ◽  
High Density Polyethylene ◽  
In Situ Synthesis ◽  
High Density ◽  
Compression Moulding ◽  
Melt Mixing ◽  
Groundnut Shell

In-situ synthesis of high-density polyethylene (HDPE) reinforced groundnut shell particulate (GSP) composite with treated GSP within the range of 10-30 wt% at 10 wt% has been achieved. The adopted technique used in the production of the composite is melt mixing and compounding using two roll mills with a compression moulding machine. Properties such as hardness, tensile strength, impact energy and water absorption analysis were examined. The result revealed that addition of GSP increases the hardness value from 22.3 to 87 Hv. However, the tensile strength progressively decreased as the GSP increases in the HDPE. This trend arises due to the interaction between neighbouring reinforced particulate which appears to influence the matrix flow, thereby inducing embrittlement of the polymer matrix. It was also observed that water absorption rate steadily increased with an increase in the exposure time and the absorbed amount of water increases by increasing the wt% of the GSP. Analysing the obtained results, it was concluded that there were improvements in the hardness, tensile strength, impact energy and water absorption properties of the HDPE-GSP polymer composite when compared to unreinforced HDPE. On these premises, GSP was found as a promising reinforcement which can positively influence the HDPE properties of modern composites.

Sign in / Sign up

Export Citation Format

Share Document