scholarly journals Evaluation of pyrolysis residue derived by oily sludge on removing heavy metals from artificial flotation wastewater

2020 ◽  
Vol 34 ◽  
pp. 82-89
Author(s):  
Huifen Yang ◽  
Zhen Li ◽  
Wenkai Ma ◽  
Peng Fu
2021 ◽  
Vol 651 (4) ◽  
pp. 042058
Author(s):  
Xuan Sun ◽  
Zhiqiang Guo ◽  
Faguo Zhong ◽  
Zhibin Wu ◽  
Penghui Yang ◽  
...  

2019 ◽  
Vol 1 (9) ◽  
Author(s):  
Weihua Gu ◽  
Jianfeng Bai ◽  
Bin Dong ◽  
En Ma ◽  
Jianmeng Chen ◽  
...  

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Wei Xiao ◽  
Xiao Yao ◽  
Fuyang Zhang

Oily sludge is a hazardous waste containing emulsified petroleum hydrocarbons, water, heavy metals, and solid particles. The objective of this work is to employ solidification/stabilization (S/S) techniques to utilize oily sludge as a roadbed material with ordinary Portland cement (OPC), fly ash (FA), and silica fume (SF) as binders and phosphogypsum (PG) as a stabilizer. The efficacy of the S/S process is assessed mainly through an unconfined compressive strength (UCS) test and a toxicity leaching test. Road performance, including water stability, freeze-thaw resistance, and volume stability, is also tested on the solidified samples. The mineralogical compositions, microstructures, and pore structure are characterized through X-ray diffractometry (XRD), scanning electron microscopy (SEM), and mercury intrusion porosimetry (MIP). The results show that the addition of 20% binders (OPC : FA : SF = 1 : 0.7 : 0.8) in combination with phosphogypsum to the oily sludge not only increases the 28-day compressive strength of the solidified samples and remarkably decreases the release of heavy metals but also refines the pore structure and compacts the microstructure. The solidified body had sufficient strength and good water stability performance, freeze-thaw resistance, and volumetric stability. This solidification/stabilization (S/S) process, which combines oily sludge treatment and phosphogypsum resource utilization, significantly enhances environmental protection and renders the solidified product economically profitable.


2018 ◽  
Vol 3 (1) ◽  
pp. 636
Author(s):  
Janina Chauca ◽  
María Rosales ◽  
Diego Muñoz ◽  
Carlos Banchón

Automobile-service-station wastes make for an acute environmental concern because they contain polyaromatic hydrocarbons, heavy metals, surfactants, and other harmful elements. An eco-friendly way to treat and take advantage of these wastes is embodied in the concept called "valorization". In the present work, valorization is described as a chemical process to remove solids from contaminated water and to stabilize oily sludge into a saponified product. Electrocoagulation and coagulation with aluminum were applied to separate oil-water emulsions and removed 99.7% of turbidity. Both coagulation processes obtained approximately 0.85 kg of treated water and 0.027 kg of dried oily sludge per kg of wastewater. A saponification process with dosages of 10% NaOH stabilized the dried oily sludge. In hopes of finding pathways to valorize wastes, chemical treatments with aluminum and NaOH obtained a product that can be used as a surfactant or as an energy source.Keywords: sludge, electrocoagulation, saponification, oil, wastewater 


Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1138
Author(s):  
Ibrahim Alkali Allamin ◽  
Nur Adeela Yasid ◽  
Siti Rozaimah Sheikh Abdullah ◽  
Mohd Izuan Effendi Halmi ◽  
Mohd Yunus Shukor

A pot experiment was conducted to measure the phyto-tolerance and accumulation of heavy metals in petroleum oily sludge POS by Cajanus cajan (pigeon pea) on soils treated with five different concentrations (1%, 2%, 3%, 4%, and 5% w/w) of the POS. The response of the plant to oily sludge varied significantly from the untreated control and among the various treatments. The growth of C. cajan was slightly (but not significantly) influenced by the oily sludge in soil; growth of C. cajan at relatively lower concentrations of POS (1 to 3%) was greater than in the treatments with relatively higher concentrations POS (4 to 5%). A significant interaction was observed in the relative growth rates (RGRs) of C. cajan, which significantly increased in the treatments with relatively low POS (1 to 3%) and decrease significantly at higher POS concentrations. The heavy metal content of the plant roots as the POS concentrations were increase show that the concentration of all heavy metals in the roots increased accordingly. Cu showed the highest accumulation with an increase from 1.9 to 6.8 mg/kg followed by Pb, Zn, Ni, Mn, and Cr, which was the least-accumulated. Heavy metal analysis in C. cajan tissues indicated a considerable accumulation of the metals Pb, Zn, Ni, Mn, Cu, and Cr in the root and stem of the plant, with negligible metal concentrations detected in the plant leaves, suggesting a low translocation factor but indicating that C. cajan is resistant to heavy metals. As the search for more eco-friendly and sustainable remediating green plant continues, C. cajan shows great potential for reclaiming POS-contaminated soil due to the above properties including resistance to toxic heavy metals from oily sludge. These findings will provide solutions to polluted soils and their subsequent re-vegetation.


Sign in / Sign up

Export Citation Format

Share Document