Effects of meteorological factors and groundwater depths on plant sap flow velocities in karst critical zone

Author(s):  
Yan Deng ◽  
Song Wu ◽  
Jing Ke ◽  
Aijun Zhu
2014 ◽  
Vol 1010-1012 ◽  
pp. 1055-1058
Author(s):  
Qing Yun Zhou ◽  
Yang Ren Wang ◽  
Shu Hong Sun

Thermal dissipation sap flow rate probe was used to measure trunk sap flow dynamic of Poplar during the growing season from September 2011 to May 2012 in coastal region of China. The relationship of trunk sap flow rate and meteorological factors was analyzed. The results showed that the process of sap flow rate of Poplar presented an obvious day and night alternate phenomenon. The diurnal variation of sap flow was a single-peak curve in sunny day and a multi-peak curve in rainy day. According to Pearson correlation analysis, the diurnal sap flow rate of Poplar was positively correlated with solar radiation and atmospheric temperature, and negatively correlated with air relative humidity. The regression analysis showed that there was a significant correlation between multi-day sap flow rate and solar radiation, and the determination coefficient was 0.287 and 0.778 in summer and autumn, respectively. The linear regression model of multi-day sap flow with meteorological multi-factor was remarkable correlation, and the determination coefficient was 0.577 and 0.791 in summer and autumn, respectively. The regression model of multi-day sap flow with meteorological multi-factor was better than with single meteorological factor.


HortScience ◽  
1994 ◽  
Vol 29 (6) ◽  
pp. 693-694 ◽  
Author(s):  
Mary Ann Rose ◽  
Mark A. Rose

A closed-loop photosynthesis system and a heat-balance sap-flow gauge independently confirmed oscillatory transpiration in a greenhouse-grown Rosa hybrids L. Repetitive sampling revealed 60-minute synchronized oscillations in CO2-exchange rate, stomatal conductance, and whole-plant sap-flow rate. To avoid confusing cyclical plant responses with random noise in measurement, we suggest that gas-exchange protocols begin with frequent, repetitive measurements to determine whether transpiration is stable or oscillating. Single measurements of individual plants would be justified only when transpiration is steady state.


Chemosphere ◽  
1998 ◽  
Vol 36 (4-5) ◽  
pp. 931-936 ◽  
Author(s):  
A. Fenyvesi ◽  
Cs. Béres ◽  
A. Raschi ◽  
R. Tognietti ◽  
H.-W. Ridder ◽  
...  

Forests ◽  
2019 ◽  
Vol 10 (9) ◽  
pp. 785 ◽  
Author(s):  
Guohui Wang ◽  
Yuying Shen ◽  
Xianlong Yang ◽  
Zhixue Chen ◽  
Baoru Mo

The traditional heat balance method for measuring plant sap flow (SF) becomes troublesome and uneconomic for multibranched shrub species if all their stems are used for the measurement. The objectives of this study were to explore specific relationships between stem-scale SF and plant morphological traits and then to scale up SF measurements from the stem scale to the individual scale for Caragana korshinskii Kom., a dominant shrub species on the Chinese Loess Plateau. Sap flow was measured for twenty-one stems from three representative individuals from July to September 2018 during the rainy season. The results indicated that the stem-scale SF in C. korshinskii presented a positive linear correlation with the stem base diameter (SBD), stem length (SL), primary branch numbers in the stem (PBN), and estimated stem biomass (W). The SBD-based statistical models performed well in estimating the stem-scale SF, with an R2 value of 0.9726 and root mean squared error (RMSE) of 2.5389 g h−1. Over the canopy projection area, the individual-scale transpiration flows for the three selected C. korshinskii were 1.91, 1.10, and 1.59 mm·d−1. In addition, stem-scale SF was positively and linearly correlated with air temperature, photosynthetically active radiation, vapor pressure deficit, reference crop evapotranspiration, and variable transpiration. This study sheds light on morphological and meteorological influences on stem-scale SF and has made contributes to the accurate and rapid estimation of the plant sap flow from easily available morphological traits for multibranched shrub species in semiarid regions. Limitations, however, may exist for the established model when it is used to estimate SF of C. korshinskii during the water-limited dry season. Our study deserves further exploration of a more general model to have a better estimation of SF for C. korshinskii in both dry and rainy seasons.


HortScience ◽  
1990 ◽  
Vol 25 (9) ◽  
pp. 1073a-1073
Author(s):  
Mark A. Rose ◽  
John W. White ◽  
Joel L. Cuello

Recently developed stem flow gauges that allow for direct, accurate, non-invasive, and continuous measurement of plant sap flow rates have not been used to monitor transpiration of floricultural plants grown in greenhouses.A Dynamax SGA10 heat-balance sap-flow sensor was mounted on a potted rose plant's main stem containing a total leaf area of 0.52 m in order to monitor transpiration. The sensor was connected to a CR21X Micrologger for data calculation and temporary storage. The results showed average midday sap-flow rates range from 20-30 g·hr-1 to 50-70 g·hr-1 at low and high levels of PPF, respectively. Nighttime levels of 4-7 g·hr-1 persisted throughout early winter trials. Monitoring transpiration of the same rose stem using a lysimeter revealed a significant linear correlation (r2 = 0.999) between the lysimeter and the stem flow gauge values.In the future, research will be conducted with the gauge to investigate relationships between microclimatic variables, photosynthesis, and transpiration.


2018 ◽  
Vol 34 (6) ◽  
pp. 899-906
Author(s):  
Azadeh Alizadeh ◽  
Arash Toudeshki ◽  
Reza Ehsani ◽  
Kati Migliaccio

Thermal dissipation systems are a conventional technique to estimate sap velocity by determining the temperature difference between sap flow probes. The Thermal Dissipation Probe (TDP) method is commercially available and has been used by many researchers and professionals to estimate sap flow in plants. However, some errors and practical issues cause inaccuracy when evaluating plant sap velocity with this technique. Specifically, the sources of these errors are from the effect of the ambient thermal gradient (i.e., error caused by the cold junction location), the underestimation of nighttime sap flow, and the deficient thermal contact between the probe and tree body. This article focuses on errors associated with the traditional TDP, which effect on the thermal difference between the reference and heated probes. These errors vary as a nonlinear function of the transmitter length and the numbers of cold junctions which are affected by changes in the ambient temperature. Keywords: Ambient thermal gradient, Sap velocity, Thermal dissipation probe (TDP), Thermocouple cold junction.


Crop Science ◽  
2019 ◽  
Vol 59 (5) ◽  
pp. 2227-2236 ◽  
Author(s):  
Lalith M. Rankoth ◽  
Ranjith P. Udawatta ◽  
Clark J. Gantzer ◽  
Shibu Jose ◽  
Kelly A. Nelson

Sign in / Sign up

Export Citation Format

Share Document