The market challenge of wind turbine industry-renewable energy in PR China and Germany

2021 ◽  
Vol 166 ◽  
pp. 120631
Author(s):  
Victor Chang ◽  
Yian Chen ◽  
Zuopeng (Justin) Zhang ◽  
Qianwen Ariel Xu ◽  
Patricia Baudier ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Wind Turbine ◽  
Pr China

scholarly journals Holistic simulation of wind turbines with fully aero-elastic and electrical model

2021 ◽  
Author(s):  
Marcus Wiens ◽  
Sebastian Frahm ◽  
Philipp Thomas ◽  
Shoaib Kahn
Keyword(s):  
Renewable Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Low Voltage ◽  
Renewable Energy Sources ◽  
Elastic Model ◽  
Electrical Model ◽  
Holistic Model ◽  
Electric System ◽  
Electrical Components

AbstractRequirements for the design of wind turbines advance facing the challenges of a high content of renewable energy sources in the public grid. A high percentage of renewable energy weaken the grid and grid faults become more likely, which add additional loads on the wind turbine. Load calculations with aero-elastic models are standard for the design of wind turbines. Components of the electric system are usually roughly modeled in aero-elastic models and therefore the effect of detailed electrical models on the load calculations is unclear. A holistic wind turbine model is obtained, by combining an aero-elastic model and detailed electrical model into one co-simulation. The holistic model, representing a DFIG turbine is compared to a standard aero-elastic model for load calculations. It is shown that a detailed modelling of the electrical components e.g., generator, converter, and grid, have an influence on the results of load calculations. An analysis of low-voltage-ride-trough events during turbulent wind shows massive increase of loads on the drive train and effects the tower loads. Furthermore, the presented holistic model could be used to investigate different control approaches on the wind turbine dynamics and loads. This approach is applicable to the modelling of a holistic wind park to investigate interaction on the electrical level and simultaneously evaluate the loads on the wind turbine.

Wind Turbine Aerodynamic Braking System Analysis Using Chord Wise Spacing

2015 ◽  
Vol 787 ◽  
pp. 217-221 ◽  
Author(s):  
B. Navin Kumar ◽  
K.M. Parammasivam
Keyword(s):  
Renewable Energy ◽  
Wind Turbine ◽  
Wind Velocity ◽  
Turbine Blade ◽  
Wind Turbines ◽  
Renewable Energy Sources ◽  
Energy Resource ◽  
Braking System ◽  
Extreme Wind ◽  
Wind Potential

Wind energy is one of the most significant renewable energy sources in the world. It is the only promising renewable energy resource that only can satisfy the nation’s energy requirements over the growing demand for electricity. Wind turbines have been installed all over the wind potential areas to generate electricity. The wind turbines are designed to operate at a rated wind velocity. When the wind turbines are exposed to extreme wind velocities such as storm or hurricane, the wind turbine rotates at a higher speed that affects the structural stability of the entire system and may topple the system. Mechanical braking systems and Aerodynamic braking systems have been currently used to control the over speeding of the wind turbine at extreme wind velocity. As a novel approach, it is attempted to control the over speeding of the wind turbine by aerodynamic braking system by providing the chord wise spacing (opening). The turbine blade with chord wise spacing alters the pressure distribution over the turbine blade that brings down the rotational speed of the wind turbine within the allowable limit. In this approach, the over speeding of the wind turbine blades are effectively controlled without affecting the power production. In this paper the different parameters of the chord wise spacing such as position of the spacing, shape of the spacing, width of the spacing and impact on power generation are analyzed and the spacing parameters are experimentally optimized.

scholarly journals Dynamic Analysis of Electrical Power Grid Delivery: Using Prime Mover Engines to Balance Dynamic Wind Turbine Output

2011 ◽  
Author(s):  
Diana K. Grauer ◽  
Michael E. Reed
Keyword(s):  
Renewable Energy ◽  
Wind Turbine ◽  
Research Team ◽  
Combustion Engine ◽  
National Laboratory ◽  
Electrical Power ◽  
Energy System ◽  
Electrical Transmission ◽  
Reciprocating Engine ◽  
Electrical Generation

This paper presents an investigation into integrated wind + combustion engine high penetration electrical generation systems. Renewable generation systems are now a reality of electrical transmission. Unfortunately, many of these renewable energy supplies are stochastic and highly dynamic. Conversely, the existing national grid has been designed for steady state operation. The research team has developed an algorithm to investigate the feasibility and relative capability of a reciprocating internal combustion engine to directly integrate with wind generation in a tightly coupled Hybrid Energy System. Utilizing the Idaho National Laboratory developed Phoenix Model Integration Platform, the research team has coupled demand data with wind turbine generation data and the Aspen Custom Modeler reciprocating engine electrical generator model to investigate the capability of reciprocating engine electrical generation to balance stochastic renewable energy.

scholarly journals Optimal Sizing of a Pv-Wind Hybrid System Using Measured and Generated Database

2021 ◽  
Vol 03 (01) ◽  
pp. 34-44
Author(s):  
Abdellah Benallal ◽  
◽  
Nawel Cheggaga ◽  
Keyword(s):  
Renewable Energy ◽  
Wind Speed ◽  
Wind Turbine ◽  
Hybrid Systems ◽  
Hybrid System ◽  
Measured Data ◽  
Electrical Load ◽  
Wind Potential ◽  
Simulation Results ◽  
The Cost

Renewable energy hybrid systems give a good solution in isolated sites, in the Algerian desert; wind and solar potentials are considerably perfect for a combination in a renewable energy hybrid system to satisfy local village electrical load and minimize the storage requirements, which leads to reduce the cost of the installation. For a good sizing, it is essential to know accurately the solar potential of the installation area also wind potential at the same height where wind electric generators will be placed. In this work, we optimize a completely autonomous PV-wind hybrid system and show the techno-economical effects of the height of the wind turbine on the sizing of the hybrid system. We also compare the simulation results obtained from using wind speed measured data at 10 meters and 40 meters of height with the ones obtained from using wind speed extrapolation on HOMER software.

scholarly journals Numerical and experimental investigations of the impacts of the integration of wind energy into distribution network

2021 ◽  
Author(s):  
◽  
Ramesh Kumar Behara
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Power ◽  
Distribution Systems ◽  
Electrical Power ◽  
Distribution Network ◽  
Experimental Investigations ◽  
Doubly Fed ◽  
The Impact

The growing needs for electric power around the world has resulted in fossil fuel reserves to be consumed at a much faster rate. The use of these fossil fuels such as coal, petroleum and natural gas have led to huge consequences on the environment, prompting the need for sustainable energy that meets the ever increasing demands for electrical power. To achieve this, there has been a huge attempt into the utilisation of renewable energy sources for power generation. In this context, wind energy has been identified as a promising, and environmentally friendly renewable energy option. Wind turbine technologies have undergone tremendous improvements in recent years for the generation of electrical power. Wind turbines based on doubly fed induction generators have attracted particular attention because of their advantages such as variable speed, constant frequency operation, reduced flicker, and independent control capabilities for maximum power point tracking, active and reactive powers. For modern power systems, wind farms are now preferably connected directly to the distribution systems because of cost benefits associated with installing wind power in the lower voltage networks. The integration of wind power into the distribution network creates potential technical challenges that need to be investigated and have mitigation measures outlined. Detailed in this study are both numerical and experimental models to investigate these potential challenges. The focus of this research is the analytical and experimental investigations in the integration of electrical power from wind energy into the distribution grid. Firstly, the study undertaken in this project was to carry out an analytical investigation into the integration of wind energy in the distribution network. Firstly, the numerical simulation was implemented in the MATLAB/Simulink software. Secondly, the experimental work, was conducted at the High Voltage Direct Centre at the University of KwaZulu-Natal. The goal of this project was to simulate and conduct experiments to evaluate the level of penetration of wind energy, predict the impact on the network, and propose how these impacts can be mitigated. From the models analysis, the effects of these challenges intensify with the increased integration of wind energy into the distribution network. The control strategies concept of the doubly fed induction generator connected wind turbine was addressed to ascertain the required control over the level of wind power penetration in the distribution network. Based on the investigation outcomes we establish that the impact on the voltage and power from the wind power integration in the power distribution system has a goal to maintain quality and balance between supply and demand.

Individual Blade Pitch Control for Alleviation of Vibratory Loads on Floating Offshore Wind Turbines

2021 ◽  
Author(s):  
Luca Pustina ◽  
Claudio Pasquali ◽  
Jacopo Serafini ◽  
Claudio Lugni ◽  
Massimo Gennaretti
Keyword(s):  
Renewable Energy ◽  
Wind Turbine ◽  
Bending Moment ◽  
Offshore Wind ◽  
Synthesis Process ◽  
Control Synthesis ◽  
Offshore Wind Turbine ◽  
Floating Offshore Wind Turbine ◽  
Blade Root ◽  
Floating Offshore Wind Turbines

Abstract Among the renewable energy technologies, offshore wind energy is expected to provide a significant contribution for the achievement of the European Renewable Energy (RE) targets for the next future. In this framework, the increase of generated power combined with the alleviation of vibratory loads achieved by application of suitable advanced control systems can lead to a beneficial LCOE (Levelized Cost Of Energy) reduction. This paper defines a control strategy for increasing floating offshore wind turbine lifetime through the reduction of vibratory blade and hub loads. To this purpose a Proportional-Integral (PI) controller based on measured blade-root bending moment feedback provides the blade cyclic pitch to be actuated. The proportional and integral gain matrices are determined by an optimization procedure whose objective is the alleviation of the vibratory loads due to a wind distributed linearly on the rotor disc. This control synthesis process relies on a linear, state-space, reduced-order model of the floating offshore wind turbine derived from aero-hydroelastic simulations provided by the open-source tool OpenFAST. In addition to the validation of the proposed controller, the numerical investigation based on OpenFAST predictions examines also the corresponding control effort, influence on platform dynamics and expected blade lifetime extension. The outcomes show that, as a by-product of the alleviation of the vibratory out-of-plane bending moment at the blade root, significant reductions of both cumulative blade lifetime damage and sway and roll platform motion are achieved, as well. The maximum required control power is less than 1% of the generated power.

scholarly journals Development of an Improved LMD Method for the Low-Frequency Elements Extraction from Turbine Noise Background

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 805
Author(s):  
Lida Liao ◽  
Bin Huang ◽  
Qi Tan ◽  
Kan Huang ◽  
Mei Ma ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Wind Turbine ◽  
Condition Monitoring ◽  
Renewable Energy Sources ◽  
Near Field ◽  
Low Frequency ◽  
Aerodynamic Noise ◽  
Frequency Noise ◽  
Human Society ◽  
Noise Background

Given the prejudicial environmental effects of fossil-fuel based energy production, renewable energy sources can contribute significantly to the sustainability of human society. As a clean, cost effective and inexhaustible renewable energy source, wind energy harvesting has found a wide application to replace conventional energy productions. However, concerns have been raised over the noise generated by turbine operating, which is helpful in fault diagnose but primarily identified for its adverse effects on the local ecosystems. Therefore, noise monitoring and separation is essential in wind turbine deployment. Recent developments in condition monitoring provide a solution for turbine noise and vibration analysis. However, the major component, aerodynamic noise is often distorted in modulation, which consequently affects the condition monitoring. This study is conducted to explore a novel approach to extract low-frequency elements from the aerodynamic noise background, and to improve the efficiency of online monitoring. A framework built on the spline envelope method and improved local mean decomposition has been developed for low-frequency noise extraction, and a case study with real near-field noises generated by a mountain-located wind turbine was employed to validate the proposed approach. Results indicate successful extractions with high resolution and efficiency. Findings of this research are also expected to further support the fault diagnosis and the improvement in condition monitoring of turbine systems.

scholarly journals Analysis on the Force and Life of Gearbox in Double-Rotor Wind Turbine

Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4220 ◽  
Author(s):  
Yaru Yang ◽  
Hua Li ◽  
Jin Yao ◽  
Wenxiang Gao ◽  
Haiyan Peng
Keyword(s):  
Renewable Energy ◽  
Life Span ◽  
Wind Turbine ◽  
Structural Parameters ◽  
Total Power ◽  
National Renewable Energy Laboratory ◽  
Ring Gear ◽  
Fixed Ring ◽  
Planet Gear ◽  
Planetary Transmission

In order to study the force and life of the key components in the gearbox of an existing double-rotor wind turbine, the design and structural parameters of the gearbox in the traditional National Renewable Energy Laboratory (NREL) 5 MW single-rotor wind turbine are adopted, and the fixed ring gear of the first planetary stage transmission is released to form a differential gearbox suitable for a double-rotor wind turbine with two inputs. The double input is used to connect the double rotor. Subsequently, the characteristics of the gearbox in a double-rotor wind turbine are discussed. On the basis of the constant rated power of the whole wind turbine, the total power is divided into two parts, which are allocated to the double rotors, then two rotational speeds of the two inputs are given according to different power ratios by complying with the matching principle of force and moment. Furthermore, the force acting on the pitch circle of the planet gear, as well as the force and life of the planet bearing of the two-stage planetary transmission are calculated and compared with a single-rotor wind turbine. The results show that the structural advantages of a double-rotor wind turbine can reduce the stress of key components of the gearbox and increase the life span of the planet bearing, thereby the life of the whole gearbox is improved and the downtime of the whole wind turbine is reduced.

Sign in / Sign up

Export Citation Format

Share Document