Economical-traveling-distance-based fleet composition with fuel costs: An application in petrol distribution

Author(s):  
Lijun Sun ◽  
Yuankai Zhang ◽  
Xiangpei Hu
Keyword(s):  
2015 ◽  
pp. 375-378
Author(s):  
Ahmed S. Vawda ◽  
Emmanuel M. Sarir ◽  
Carlos Andrés Donado

Impurity removal by separation and crystallisation are the most important process operations in a refinery. This paper studies the main separation processes, namely clarification, decolourisation and crystallisation to demonstrate where poor separation contributes to excessive costs of processing. The results of various tests are analysed and conclusions are made for refiners to manage their chemical and fuel costs.


2021 ◽  
Vol 129 ◽  
pp. 103197
Author(s):  
Şule Yıldırım ◽  
Barış Yıldız

1997 ◽  
Vol 30 (17) ◽  
pp. 91-96
Author(s):  
F. Hoese ◽  
X. Lei ◽  
E. Lerch ◽  
H. Kuerten

2007 ◽  
Vol 51 (04) ◽  
pp. 326-337
Author(s):  
K. Gasljevic ◽  
E. F. Matthys

We have investigated the feasibility of using high-molecular-weight polysaccharides produced by marine microalgae to reduce the drag on ships and therefore to be able to reduce the needed propulsion power and fuel costs or, alternatively, to increase the ship speed. Experimental and analytical studies were used to answer four critical questions:How suitable are the biopolymers for drag reduction on ships?What is the needed polymer consumption rate at a given level of drag reduction?What is the achievable polymer production rate that can be achieved by the microalgae?What are possible modes of implementation of the proposed technology? It is seen that in situ production of biopolymers by microalgae growing on the hull may be a possible approach to polymeric ship drag reduction. Production of biopolysaccharide off the ship and even harvesting it from the ocean are other possibilities. The use of biopolymers is naturally advantageous from an environmental point of view as well. Some comparison of biopolymers and synthetic polymers is also presented. Several technical issues remain to be investigated, but the information available suggests that biopolymers may be the best additives for drag reduction on ships.


2021 ◽  
Vol 9 (2B) ◽  
Author(s):  
Luiz Gonzaga de Freitas Neto ◽  
Luciano Ondir Freire ◽  
Adimir Dos Santos ◽  
Delvonei Alves De Andrade

Operating costs of merchant ships, related to fuel costs, has led the naval industry to search alternatives to the current technologies of propulsion power. A possibility is to employ nuclear reactors like the Russian KLT-40S, which is a pressurized water reactor (PWR) and has experience on civilian surface vessels. However, space and weight are critical factors in a nuclear propulsion project, in addition to operational safety and costs. This work aims at comparing molten salt reactors (MSR) with PWR for merchant ship propulsion. The present study develops a qualitative analysis on weight, volume, overnight costs, fuel costs and nuclear safety. This work compares the architecture and operational conditions of these two types of reactors. The result is that MSR may produce lower amounts of high-activity nuclear tailings and, if it adopts the 233U-thorium cycle, it may have lower risks of proliferating nuclear weapons. Besides proliferation issues, this 4th generation reactor may have lower weight, occupy less space, and achieve the same levels of safety with less investment. Thus, molten salt regenerative reactors using the 233U-thorium cycle are potential candidates for use in ship propulsion.


2013 ◽  
Author(s):  
Arun Kishore Eswara ◽  
S. C. Misra ◽  
U. S. Ramesh

This paper discusses the science of natural gas, its composition and ways to determine and coherently express its physical and chemical properties. Pricing of natural gas is shown with regard to weight and energy. A 60 Ton harbor tug employing either a set of constant rpm engines for CPP operation, or a set of variable rpm engines for FPP operation, with a standard load profile is made the basis for discussion. Advantage of evaluating thermal efficiency of gas engines relative to the higher heating value of natural gas, as against its lower heating value is explained. A compendium of storage options and the resulting endurance with the use of natural gas forms such as liquified gas (LNG), compressed gas (CNG) and adsorbed gas (ANG) is presented. Steps to ascertain fuel consumption of the gas engines operated according to the load profile and an approach to evaluate and relate the quantities of LNG, CNG and ANG is shown. Fuel costs and emissions from the tug operation using natural gas as fuel are evaluated per month and compared with diesel and residual fuels. Green House Gas emissions as a summation of emission constituents from the natural gas fuelled tug operation is detailed, and its need emphasized. The concepts of useful work done, emission efficiency parameter and energy efficiency parameter, which may be helpful in the design of harbor tugs and similar service vessels are proposed. The emission efficiency parameter is evaluated and analyzed for the 60 ton harbor tug.


2020 ◽  
Vol 2020 (0) ◽  
pp. S14202
Author(s):  
Takeru DOAN ◽  
Satoshi NAGAHARA ◽  
Takafumi CHIDA ◽  
Junichi KATSUBE ◽  
Tooru ADACHI ◽  
...  

2021 ◽  
Vol 2021 (23) ◽  
pp. 20-30
Author(s):  
Taras Pechonchyk ◽  
◽  
Vitaliy Ivanchenko ◽  

AbstractIntroduction. Effective management of road indstry is particularly important in conditions of limited funding, as it is not possible to provide adequate funding of the economic entity that has the functions of a customer service. The cost of the customer service maintenance depends directly on the compliance with applicable regulations for these works cost determination. One of the aspects that form a considerable part of the costs of customer service is the maintenance of service vehicles.Problem Statement. Road services in the regions (hereinafter RSR) are the recipients and managers of the funds from the State Budget of Ukraine that are directed for the development and maintenance of public roads of state importance, being as well the asset holders of these roads. To perform their functions, the RSR have vehicles on their balance, the use of which involves a number of costs, including fuel and lubricants, repair, maintenance, replacement of tires, etc. The most important of the steps involved in setting the costs of vehicle maintenance is the process of cost planning. Planning has to be based on the structure of the vehicle fleet (own or leased), functional responsibilities and scope of road works.Planning is carried out for vehicles on the balance of the RSR, as well as for leased vehicles. In the case of leasing, the costs mentioned above are added by the vehicles leasing costs. These costs must be forecasted, justified and performed within the approved cost estimates of the customer service expenses.Purpose. The purpose of the article is to highlight the theoretical and methodological approaches to the calculation of planned costs for the maintenance of service vehicles of the road works customer.Materials and methods. Dialectical methods of knowledge, such as analysis and synthesis of fleet composition characteristics and approaches to cost planning methods, as well as induction, were used in writing the article to explore some aspects of the process of calculating the planned cost of maintenance of the road works customer's service vehicles.Results. The study highlights and describes the main approaches to the calculation of planned costs for the maintenance of service vehicles of the road works customer. The methodology of calculation of planned costs for the maintenance of service vehicles is explored.Conclusions. The introduction of a clear methodology and analytical toolkit for calculating all necessary expenditure items for the maintenance of the road works customer's vehicles in the cost planning process will establish the implementation of a clear mechanism for calculating the planned costs of maintenance of the road works customer's vehicles. It will also provide an automated information-analytical complex for planning of cost estimates, with information entry and reporting in standard forms and possibility of prompt response to changes in fleet composition, needs for spare parts, repairs or other expenses for the maintenance of service vehicles and making changes in cost estimates.Keywords: motor vehicles, costs, cost planning, customer service, maintenance of service vehicles


Sign in / Sign up

Export Citation Format

Share Document