Solar Energy Production in India and Commonly Used Technologies—An Overview

This review uses a more holistic approach to provide comprehensive information and up-to-date knowledge on solar energy development in India and scientific and technological advancement. This review describes the types of solar photovoltaic (PV) systems, existing solar technologies, and the structure of PV systems. Substantial emphasis has been given to understanding the potential impacts of COVID-19 on the solar energy installed capacity. In addition, we evaluated the prospects of solar energy and the revival of growth in solar energy installation post-COVID-19. Further, we described the challenges caused by transitions and cloud enhancement on smaller and larger PV systems on the solar power amended grid-system. While the review is focused on evaluating the solar energy growth in India, we used a broader approach to compare the existing solar technologies available across the world. The need for recycling waste from solar energy systems has been emphasized. Improved PV cell efficiencies and trends in cost reductions have been provided to understand the overall growth of solar-based energy production. Further, to understand the existing technologies used in PV cell production, we have reviewed monocrystalline and polycrystalline cell structures and their limitations. In terms of solar energy production and the application of various solar technologies, we have used the latest available literature to cover stand-alone PV and on-grid PV systems. More than 5000 trillion kWh/year solar energy incidents over India are estimated, with most parts receiving 4–7 kWh/m2. Currently, energy consumption in India is about 1.13 trillion kWh/year, and production is about 1.38 trillion kWh/year, which indicates production capacities are slightly higher than actual demand. Out of a total of 100 GW of installed renewable energy capacity, the existing solar capacity in India is about 40 GW. Over the past ten years, the solar energy production capacity has increased by over 24,000%. By 2030, the total renewable energy capacity is expected to be 450 GW, and solar energy is likely to play a crucial role (over 60%). In the wake of the increased emphasis on solar energy and the substantial impacts of COVID-19 on solar energy installations, this review provides the most updated and comprehensive information on the current solar energy systems, available technologies, growth potential, prospect of solar energy, and need for growth in the solar waste recycling industry. We expect the analysis and evaluation of technologies provided here will add to the existing literature to benefit stakeholders, scientists, and policymakers.

In-situ gelation regulating micro-electric fields to induced Li deposition in quasi-solid-state lithium metal batteries

Quasi-solid-state lithium metal battery has great potential in next generation energy system for its high energy capacity and security. However, the system still suffers from incompatible interphases and limited cycling...

Experimental Data of Grinding Dried Fibrous Plant Materials

Introduction. Developing a method for energy-efficient grinding of fibrous vegetable raw materials to avoid the clogging of grids remains an urgent task. The aim of the research is to study the process of grinding dried fibrous plant materials and to estimate the influence of the device operating characteristics on the quality of grinding and the process energy intensity. Materials and Methods. The experimental apparatus is a rotor grinder. Its working bodies are alternate knives and hammers. When a hammer is in motion, its triangle side creates the reduced pressure area. There was studied the influence of the linear velocities of knife motion and of feed of raw materials on fractional composition of the grinded materials, grinder productivity, and grinding specific energy capacity. Results. It is found that the change in the fractional composition of the grinded product occurs when the speed of the rotor knives increases. Optimal range of knife speed for producing the product of the required fractional composition is 55‒75 m/s. The increase in the speed leads to increasing productivity, but is accompanied by the growth of specific power intensity. If the rotor speed is constant, the increase of raw material feed increases the grinder productivity, but only up to a certain value. After that, the productivity decreases because of excessive filling of the working chamber with raw materials and clogging of the grates. For each value of the knife speed, there is an optimal feed that ensures the maximum productivity. High values of knife speed lead to significant energy intensity of the process and overgrinding of raw materials. Therefore, the optimal range of knife speed is 55‒65 m/s. Discussion and Conclusion. Effective grinding of raw materials is achieved through lower energy capacity of grinding process and absence of grate clogs resulted from separating particles from the surface of plants to be grinded.

Energy assessment of livestock production

The article provides information on the analysis of energy costs, energy intensity and energy efficiency of livestock enterprises of the agro-industrial complex. The problem of determining the economically feasible ratio between the energy expended for the production of certain products and the amount of products produced is considered, and the questions that can be answered when solving this problem are considered. The scheme of energy flows in the technological cycle of animal husbandry, as well as the dependence of energy intensity and energy efficiency of the production of animal products has been analyzed. Keywords: ENERGY CAPACITY OF LIVESTOCK, ENERGY EFFICIENCY OF LIVESTOCK, ECONOMY OF RESOURCES, ENERGY COSTS

Investigation Adsorption Process Energy Capacity Reducing Possibility by Composite Adsorbents Implement

The research results presented in the article are devoted to the compressed air adsorption drying processes energy intensity reducing possibilities study. The investigation concerns the new adsorbent – composite. The material is considered as one of the most perspective at the present time. It’s ehergy efficiency is proved comparing traditional adsorbents such as silica gel, alumogel, zeolites, etc. The authors consider the bulk density as one of the factors at the adsorption process energy efficiency increase. The formulas given at the articles allow to calculate the different adsorbents bulk and apparent density, the compressor’s energy efficiency by using different adsorbents at pneumatic schemes, etc.

Implementation of Multi-Exit Neural-Network Inferences for an Image-Based Sensing System with Energy Harvesting

Wireless sensor systems powered by batteries are widely used in a variety of applications. For applications with space limitation, their size was reduced, limiting battery energy capacity and memory storage size. A multi-exit neural network enables to overcome these limitations by filtering out data without objects of interest, thereby avoiding computing the entire neural network. This paper proposes to implement a multi-exit convolutional neural network on the ESP32-CAM embedded platform as an image-sensing system with an energy constraint. The multi-exit design saves energy by 42.7% compared with the single-exit condition. A simulation result, based on an exemplary natural outdoor light profile and measured energy consumption of the proposed system, shows that the system can sustain its operation with a 3.2 kJ (275 mAh @ 3.2 V) battery by scarifying the accuracy only by 2.7%.