The influence of glass substrates on the damp heat degradation of ZnO:Al films

2020 ◽  
Vol 715 ◽  
pp. 138429
Author(s):  
Mirjam Theelen ◽  
Vasileios Ntinas ◽  
Henk Steijvers ◽  
Hero't Mannetje ◽  
Zeger Vroon
Keyword(s):  
Glass Substrates ◽  
Heat Degradation

An Study of Influence of Imperfections on the Delamination of Diamond-Like Carbon Films

2002 ◽  
Vol 719 ◽  
Author(s):  
Myoung-Woon Moon ◽  
Kyang-Ryel Lee ◽  
Jin-Won Chung ◽  
Kyu Hwan Oh
Keyword(s):  
Cross Sections ◽  
Focused Ion Beam ◽  
Imaging System ◽  
Ion Beam ◽  
Carbon Films ◽  
Diamond Like Carbon ◽  
Glass Substrates ◽  
Atomic Force ◽  
Initiation And Propagation

AbstractThe role of imperfections on the initiation and propagation of interface delaminations in compressed thin films has been analyzed using experiments with diamond-like carbon (DLC) films deposited onto glass substrates. The surface topologies and interface separations have been characterized by using the Atomic Force Microscope (AFM) and the Focused Ion Beam (FIB) imaging system. The lengths and amplitudes of numerous imperfections have been measured by AFM and the interface separations characterized on cross sections made with the FIB. Chemical analysis of several sites, performed using Auger Electron Spectroscopy (AES), has revealed the origin of the imperfections. The incidence of buckles has been correlated with the imperfection length.

DEVELOPMENT OF A POROUS CERAMIC-BASED AIR FLOAT PLATFORM FOR LARGE GLASS SUBSTRATES

2011 ◽  
Vol 2 (4) ◽  
pp. 313-321 ◽  
Author(s):  
Yeeu-Chang Lee ◽  
Chin-Chang Yu ◽  
Ruey-Yih Tsai ◽  
Jen-Chung Hsiao ◽  
Ching-Hao Chen ◽  
...  
Keyword(s):  
Porous Ceramic ◽  
Glass Substrates ◽  
Large Glass

Chemical synthesis and study of structural and optoelectronic properties of CdS thin films: Effect of SILAR growth cycles

2015 ◽  
Vol 9 (3) ◽  
pp. 2461-2469
Author(s):  
S. R. Gosavi ◽  
K. B. Chaudhari
Keyword(s):  
Thin Films ◽  
Average Crystallite Size ◽  
X Ray Diffraction ◽  
Silar Method ◽  
Growth Cycles ◽  
Glass Substrates ◽  
Layer Adsorption ◽  
Cds Thin Films ◽  
Structural And Optoelectronic Properties ◽  
Deposited Film

CdS thin films were deposited on glass substrates by using successive ionic layer adsorption and reaction (SILAR) method at room temperature. The effect of SILAR growth cycles on structural, morphological, optical and electrical properties of the films has been studied.  The thickness of the deposited film is measured by employing weight difference method. The X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM) studies showed that all the films exhibit polycrystalline nature and are covered well with glass substrates. The values of average crystallite size were found to be 53 nm, 58 nm, 63 nm and 71 nm corresponding to the thin films deposited with 30, 40, 50 and 60 SILAR growth cycles respectively. From the UV–VIS spectra of the deposited thin films, it was seen that both the absorption properties and energy bandgap of the films changes with increasing number of SILAR growth cycles. A decrease of electrical resistivity has been observed with increasing SILAR growth cycle. 

Development of an AC Electrical Field Tribochemical Polishing Technique to Promote High-Efficiency Polishing for Glass Substrates

2012 ◽  
Vol 78 (4) ◽  
pp. 316-320
Author(s):  
Hiroshi IKEDA ◽  
Yoichi AKAGAMI ◽  
Michio UNEDA ◽  
Osamu OHNISHI ◽  
Syuhei KUROKAWA ◽  
...  
Keyword(s):  
High Efficiency ◽  
Electrical Field ◽  
Glass Substrates

Electrodeposition of Cu2O Particles by Using Electrolyte Solution Containing Glucopone as Surfactant

2009 ◽  
Vol 1 (2) ◽  
pp. 18-20
Author(s):  
Dahyunir Dahlan
Keyword(s):  
Indium Tin Oxide ◽  
Pulse Current ◽  
Platinum Electrode ◽  
Saturated Calomel Electrode ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Substrates ◽  
Continuous Current ◽  
Oxide Particles ◽  
Cupric Sulphate

Copper oxide particles were electrodeposited onto indium tin oxide (ITO) coated glass substrates. Electrodeposition was carried out in the electrolyte containing cupric sulphate, boric acid and glucopone. Both continuous and pulse currents methods were used in the process with platinum electrode, saturated calomel electrode (SCE) and ITO electrode as the counter, reference and working electrode respectively. The deposited particles were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). It was found that, using continuous current deposition, the deposited particles were mixture of Cu2O and CuO particles. By adding glucopone in the electrolyte, particles with spherical shapes were produced. Electrodeposition by using pulse current, uniform cubical shaped Cu2O particles were produced

PREPARATION AND CHARACTERIZATION OF POLYVINYL ALCOHOL THIN FILMS FOR ORGANIC THIN FILM TRANSISTORS AND BIOMEDICAL APPLICATIONS

2018 ◽  
Vol 5 (2) ◽  
pp. 16-18
Author(s):  
Chandar Shekar B ◽  
Ranjit Kumar R ◽  
Dinesh K.P.B ◽  
Sulana Sundar C ◽  
Sunnitha S ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Thin Film Transistors ◽  
Gravimetric Method ◽  
Dip Coating ◽  
Organic Thin Film Transistors ◽  
Poly Vinyl Alcohol ◽  
Organic Thin Film ◽  
Glass Substrates ◽  
Coating Method

Thin films of poly vinyl alcohol (PVA) were prepared on pre-cleaned glass substrates by Dip Coating Method. FTIR spectrum was used to identify the functional groups present in the prepared films. The vibrational peaks observed at 1260 cm-1 and 851 cm-1 are assigned to C–C stretching and CH rocking of PVA.The characteristic band appearing at 1432 cm-1 is assigned to C–H bend of CH2 of PVA. The thickness of the prepared thin films were measured by using an electronic thickness measuring instrument (Tesatronic-TTD20) and cross checked by gravimetric method. XRD spectra indicated the amorphous nature of the films.Surface morphology of the coated films was studied by scanning electron microscope (SEM). The surface revealed no pits and pin holes on the surface. The observed surface morphology indicated that these films could be used as dielectric layer in organic thin film transistors and as drug delivery system for wound healing.

X- ray diffraction and dielectric properties of PbSe thin films

2019 ◽  
Vol 15 (34) ◽  
pp. 1-14
Author(s):  
Bushra A. Hasan
Keyword(s):  
Thin Films ◽  
Thermal Activation ◽  
Thermal Evaporation ◽  
Thermal Activation Energy ◽  
Dielectric Constants ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
Thermal Evaporation Method ◽  
X Ray ◽  
Glass Substrates

Lead selenide PbSe thin films of different thicknesses (300, 500, and 700 nm) were deposited under vacuum using thermal evaporation method on glass substrates. X-ray diffraction measurements showed that increasing of thickness lead to well crystallize the prepared samples, such that the crystallite size increases while the dislocation density decreases with thickness increasing. A.C conductivity, dielectric constants, and loss tangent are studied as function to thickness, frequency (10kHz-10MHz) and temperatures (293K-493K). The conductivity measurements confirm confirmed that hopping is the mechanism responsible for the conduction process. Increasing of thickness decreases the thermal activation energy estimated from Arhinus equation is found to decrease with thickness increasing. The increase of thickness lead to reduce the polarizability α while the increasing of temperature lead to increase α.

Sol-gel growth of Ni doped CdS on glass substrates: effect of spin coating speed and dopant concentration

2020 ◽  
Vol 10 ◽  
Author(s):  
Atefeh Nazari Setayesh ◽  
Hassan Sedghi
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Spin Coating ◽  
Optical Band Gap ◽  
Dopant Concentration ◽  
Rotation Speed ◽  
Sol Gel ◽  
Band Gap Energy ◽  
Gap Energy ◽  
Glass Substrates

Background: In this work, CdS thin films were synthesized by sol-gel method (spin coating technique) on glass substrates to investigate the optical behavior of the film. Methods: Different substrate spin coating speeds of 2400, 3000, 3600 rpm and different Ni dopant concentrations of 0 wt.%, 2.5 wt.%, 5 wt.%) were investigated. The optical properties of thin films such as refraction index, extinction coefficient, dielectric constant and optical band gap energy of the layers were discussed using spectroscopic ellipsometry method in the wavelength range of 300 to 900 nm. Results: It can be deduced that substrate rotation speed and dopant concentration has influenced the optical properties of thin films. By decreasing rotation speed of the substrate which results in films with more thicknesses, more optical interferences were appeared in the results. Conclusion: The samples doped with Ni comparing to pure ones have had more optical band gap energy.

Deposition time dependent study of structural and optical properties of PbS thin films grown by CBD method

2020 ◽  
Vol 13 ◽  
Author(s):  
Minakshi Chaudhary ◽  
Yogesh Hase ◽  
Ashwini Punde ◽  
Pratibha Shinde ◽  
Ashish Waghmare ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Band Gap ◽  
Deposition Time ◽  
Secondary Growth ◽  
Cost Effective ◽  
Xrd Analysis ◽  
Structural Morphology ◽  
Glass Substrates ◽  
Cbd Method

: Thin films of PbS were prepared onto glass substrates by using a simple and cost effective CBD method. Influence of deposition time on structural, morphology and optical properties have been investigated systematically. The XRD analysis revealed that PbS films are polycrystalline with preferred orientation in (200) direction. Enhancement in crystallinity and PbS crystallite size has been observed with increase in deposition time. Formation of single phase PbS thin films has been further confirmed by Raman spectroscopy. The surface morphology analysis revealed the formation of prismatic and pebble-like PbS particles and with increase in deposition time these PbS particles are separated from each other without secondary growth. The data obtained from the EDX spectra shows the formation of high-quality but slightly sulfur rich PbS thin films over the entire range of deposition time studied. All films show increase in absorption with increase in deposition time and a strong absorption in the visible and sub-band gap regime of NIR range of the spectrum with red shift in band edge. The optical band gap shows decreasing trend, as deposition time increases but it is higher than the band gap of bulk PbS.

Sign in / Sign up

Export Citation Format

Share Document