An empirical model to predict soil bulk density profiles in field conditions using penetration resistance, moisture content and soil depth

2000 ◽  
Vol 37 (4) ◽  
pp. 167-184 ◽  
Author(s):  
J.L Hernanz ◽  
H Peixoto ◽  
C Cerisola ◽  
V Sánchez-Girón
Keyword(s):  
Moisture Content ◽  
Bulk Density ◽  
Empirical Model ◽  
Soil Depth ◽  
Penetration Resistance ◽  
Soil Bulk Density ◽  
Field Conditions ◽  
Density Profiles

scholarly journals A Study of Some Physical Properties of Two Different Soil Textures Planted with Conocarpus Trees (Conocarpuslancifolius. Engl)

2018 ◽  
Vol 7 (2) ◽  
pp. 133-145
Author(s):  
Nuhad S. S. AL- Wali ◽  
Kawthar A. AL- Mosawi
Keyword(s):  
Moisture Content ◽  
Bulk Density ◽  
Sandy Loam ◽  
Soil Depth ◽  
Penetration Resistance ◽  
Soil Samples ◽  
Silty Clay ◽  
Soil Penetration Resistance ◽  
Unplanted Soil ◽  
Mean Weight Diameter

This research has been conducted to study the effect of Conocarpus trees and their roots on some of soilphysical properties. The soil physical properties are moisture content , bulk density , total porosity , mean weight diameter (dry sieveing) and soil penetration resistance . Some soil samples are collected from two locations :the first location is Agric. College research, Garmat Ali, stations , Basra university , and the second location isZuwber province farm . The soil texture of the first location is silty clay which is classified as fine clay mixed Calcarioushy perthermictypictorrifluvent, while the soil texture of  the second location is sandy loam. This soil is classified with in species Entisol and under species psamments and high group , underhigh group and family (Typictorripsamments, Calcarious Mixed Hyperthermic).  The soil samples are collected from two soil depths( 0 – 30 and 30 – 60) from both locations are planted with Conocarpus trees, their ages ranged between 4 to 5 years . The trees height is 2.5 – 3.0 m . Another soil samples are also collected from unplanted soil  with Conocarpus trees. The results reveated that the silty clay soil is significantly surpassed the sandy loam soil in moisture content and mean weight diameter by a percentage of 68.76% and 32.91% respectively . Whereas, the bulk density and soil penetration resistance decreased , while the total porosity of the silty clay soil as compared with sandy loam soil .For unplanted soil, moisture content, the bulk density and the soil penetration resistance are increased as compared with planted soil . The soil depth (30 – 60)cm is surpassed soil depth of ( 0- 30)cm in giving higher values of moisture content andbulk density whereas it does not significantly affect the mean weight diameter and  soil penetration resistance .

scholarly journals Effect of Soil Compaction and Bulk Density on the Growth and Yield of Soybean (Glycine max) on Sandy Clay Loam Soil of the Semi-arid Region of Northern Nigeria as Influenced by Tractor Wheel Traffic

2019 ◽  
pp. 1-6
Author(s):  
Abdu Dauda ◽  
Bukar Usman
Keyword(s):  
Moisture Content ◽  
Bulk Density ◽  
Soil Compaction ◽  
Soil Moisture Content ◽  
Penetration Resistance ◽  
Soil Bulk Density ◽  
Growth And Yield ◽  
Clay Loam Soil ◽  
Loam Soil ◽  
Semi Arid Region

Soil compaction from farm machinery is an environmental problem. The effect of compaction on plant growth and yield depends on the crop grown and the environmental conditions that crop encounters. The effect of compaction from tractor traffic on soybean (Glycine max), variety TGX1448-2E, on a sandy clay loam soil in the semi-arid region of northern Nigeria was investigated for two growing seasons, 2015 and 2016. A randomized complete block design of the field of plots with treatments of 0,5,10, 15 and 20 passes of a tractor MF 390 was used. Each treatment was replicated three times. The soil bulk density, penetration resistance and soil moisture content for each applied load were measured and the yield from each treatment was determined.  Agronomic treatments were kept the same for all plots in both 2015 and 2016. Results showed increased soil bulk density, penetration resistance and soil moisture content with increased tractor passes. Highest grain yield was obtained at 5 tractor passes with a mean bulk density of 1.76 Mgm,-3 penetration resistance 1.70 MPa and moisture content 13.37% with a mean yield of 2568 kgha-1 and lowest was obtained from 20 tractor passes were 340 kgha-1. Statistical models were used to predict yield as a function of bulk density, penetration resistance,   moisture content, contact pressure, and a number of tractor traffic passes. Grain yield with respect to moisture content gave the best yield prediction (r2 = 0.94).           

scholarly journals Data Grouping Method for the Purpose of Forecasting the Mechanical Strength of Plastic Soils

Agronomy ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 578
Author(s):  
Dariusz Błażejczak ◽  
Jan Jurga ◽  
Jarosław Pytka
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Bulk Density ◽  
Field Measurements ◽  
Penetration Resistance ◽  
Soil Bulk Density ◽  
Regression Equations ◽  
Soil Penetration Resistance ◽  
Small Set ◽  
Data Grouping

The aim of this work was to develop a method of data grouping (DGM) that enables the selection of regression equations for forecasting soil penetration resistance based on an easily available and small set of input data: soil moisture content, soil bulk density and the grain size distribution of the soil. Models for forecasting the penetration resistance were created by selecting regression equations for specific intervals of granulometric variability of soil fractions. A field measurements campaign was conducted and soil samples were taken from the subsoil on 43 profiles, at depths of 25–30, 35–40, 45–50 and 55–60 cm. It was found that the dry bulk density is much less useful for predicting the penetration resistance of plastic soils than soil moisture. The study also showed that it is possible to forecast the soil penetration resistance on the basis of the gravimetric moisture content and the soil specific surface.

Soil compaction under varying rest periods and levels of mechanical disturbance in a rotational grazing system

2011 ◽  
Vol 91 (6) ◽  
pp. 957-964 ◽  
Author(s):  
C. Halde ◽  
A. M. Hammermeister ◽  
N. L. Mclean ◽  
K. T. Webb ◽  
R. C. Martin
Keyword(s):  
Bulk Density ◽  
Soil Compaction ◽  
Penetration Resistance ◽  
Soil Bulk Density ◽  
Intensive Treatment ◽  
Rotational Grazing ◽  
Pasture Management ◽  
Soil Penetration Resistance ◽  
Rest Periods ◽  
Grazing System

Halde, C., Hammermeister, A. M., McLean, N. L., Webb, K. T. and Martin, R. C. 2011. Soil compaction under varying rest periods and levels of mechanical disturbance in a rotational grazing system. Can. J. Soil Sci. 91: 957–964. In Atlantic Canada, data are limited regarding the effect of grazing systems on soil compaction. The objective of the study was to determine the effect of intensive and extensive rotational pasture management treatments on soil bulk density, soil penetration resistance, forage productivity and litter accumulation. The study was conducted on a fine sandy loam pasture in Truro, Nova Scotia. Each of the eight paddocks was divided into three rotational pasture management treatments: intensive, semi-intensive and extensive. Mowing and clipping were more frequent in the intensive than in the semi-intensive treatment. In the extensive treatment, by virtue of grazing in alternate rotations, the rest period was doubled than that of the intensive and semi-intensive treatments. Both soil bulk density (0–5 cm) and penetration resistance (0–25.5 cm) were significantly higher in the intensive treatment than in the extensive treatment, for all seasons. Over winter, bulk density decreased significantly by 6.8 and 3.8% at 0–5 and 5–10 cm, respectively. A decrease ranging between 40.5 and 4.0% was observed for soil penetration resistance over winter, at 0–1.5 cm and 24.0–25.5 cm, respectively. The intensive and semi-intensive treatments produced significantly more available forage for grazers annually than the extensive treatment. Forage yields in late May to early June were negatively correlated with spring bulk density.

scholarly journals The Performance of the DES Sensor for Estimating Soil Bulk Density under the Effect of Different Agronomic Practices

Geosciences ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 117 ◽  
Author(s):  
Ahmed Abed Gatea Alshammary ◽  
Abbas Z. Kouzani ◽  
Akif Kaynak ◽  
Sui Yang Khoo ◽  
Michael Norton ◽  
...  
Keyword(s):  
Bulk Density ◽  
Soil Depth ◽  
Specific Energy Consumption ◽  
Strong Relationship ◽  
Soil Bulk Density ◽  
Electromechanical System ◽  
Soil Tillage ◽  
Tillage Systems ◽  
Agronomic Practices ◽  
Lack Of Information

The estimation of soil wet bulk density (ρn) and dry bulk density (ρb) using the novel digital electromechanical system (DES) has provided information about important parameters for the assessment of soil quality and health with a direct application for agronomists. The evaluation of the DES performance is particularly appropriate for different tillage methods, mulching systems, and fertilizers used to increase soil fertility and productivity, but currently, there is a lack of information, particularly in the arid areas in underdeveloped countries. Therefore, the main aim of this study was the application of a novel digital electromechanical system (DES) to evaluate bulk density, wet (ρn) and dry (ρb), under different soil treatments according to the variations in thermal efficiencies (ηth), microwave penetration depths (MDP), and specific energy consumption (Qcon) in an experimental area close to Baghdad (Iraq). The experimental design consisted of 72 plots, each 4 m2. The agronomic practices included two different tillage systems (disc plough followed by a spring disk and mouldboard plough followed by a spring disk) and twelve treatments involving mulching plastic sheeting combined with fertilizers, to determine their effect on the measured soil ρn and ρb and the DES performance in different soils. The results indicated that soil ρn and ρb varied significantly with both the tillage systems and the mulching systems. As expected, the soil ρn and ρb, MDP, and Qcon increased with an increase in the soil depth. Moreover, the tillage, soil mulching, and soil depth value significantly affected ηth and Qcon. A strong relationship was identified between the soil tillage and MDP for different soil treatments, leading to the changes in soil ρb and the soil dielectric constant (ε’).

scholarly journals Modeling and correction of soil penetration resistance for variations in soil moisture and soil bulk density

2016 ◽  
Vol 36 (3) ◽  
pp. 449-459 ◽  
Author(s):  
Wininton M. da Silva ◽  
Aloísio Bianchini ◽  
Cesar A. da Cunha
Keyword(s):  
Soil Moisture ◽  
Bulk Density ◽  
Linear Models ◽  
Clay Soil ◽  
Penetration Resistance ◽  
Soil Bulk Density ◽  
Good Representation ◽  
Soil Resistance ◽  
Soil Penetration Resistance ◽  
Resistance Value

ABSTRACT This study aimed to describe the behavior of models for adjusting data of soil penetration resistance for variations in soil moisture and soil bulk density. The study was carried out in Lucas do Rio Verde, MT, Brazil in a typic dystrophic red-yellow Latosol (Oxisol) containing 0.366 kg kg−1 of clay. Soil penetration resistance measurements were conducted in the soil moistures of 0.33 kg kg−1, 0.28 kg kg−1, 0.25 kg kg−1 and 0.22 kg kg−1. Soil penetration resistance behavior due to variations in soil moisture and soil bulk density was assessed by estimating the soil resistance values by non-linear models. There was an increase of the soil penetration resistance values as soil was losing moisture. For the same edaphic condition studied, small differences in the data of soil bulk density affect differently the response of soil resistance as a function of moisture. Both soil bulk density and soil moisture are essential attributes to explain the variations in soil penetration resistance in the field. The good representation of the critical soil bulk density curve as a limiting compression indicator requires the proper choice of the restrictive soil resistance value for each crop.

Impacts of grazing systems on soil compaction and pasture production in Alberta

2002 ◽  
Vol 82 (1) ◽  
pp. 1-8 ◽  
Author(s):  
N. T. Donkor ◽  
J. V. Gedir ◽  
R. J. Hudson ◽  
E. W. Bork ◽  
D. S. Chanasyk ◽  
...  
Keyword(s):  
Moisture Content ◽  
Bulk Density ◽  
Cervus Elaphus ◽  
Soil Compaction ◽  
Penetration Resistance ◽  
Moderate Intensity ◽  
Pasture Production ◽  
Grassland Ecosystems ◽  
Moist Condition ◽  
Grazing Systems

Livestock trampling impacts have been assessed in many Alberta grassland ecosystems, but the impacts of animal trampling on Aspen Boreal ecosystems have not been documented. This study compared the effects of high intensity [4.16 animal unit month per ha (AUM) ha-1] short-duration grazing (SDG) versus moderate intensity (2.08 AUM ha-1) continuous grazing (CG) by wapiti (Cervus elaphus canadensis) on soil compaction as measured by bulk density at field moist condition (Dbf) and penetration resistance (PR). Herbage phytomass was also measured on grazed pastures and compared to an ungrazed control (UNG). The study was conducted at Edmonton, Alberta, on a Dark Gray Luvisolic soil of loam texture. Sampling was conducted in the spring and fall of 1997 and 1998. Soil cores were collected at 2.5-cm intervals to a depth of 15-cm for measurement of bulk density (Dbf) and moisture content. Penetration resistance to 15 cm at 2.5-cm intervals was measured with a hand-pushed cone penetrometer. The Dbf and PR of the top 10-cm of soil were significantly (P ≤ 0.05) greater by 15 and 17% under SDG than CG, respectively, by wapiti. Generally, Dbf in both grazing treatments decreased over winter at the 0-7.5 cm and 12.5-15 cm depths, suggesting that freeze-thaw cycles over the winter alleviated compaction. Soil water content under SDG was significantly (P < 0.05) lower than CG. Total standing crop and fallen litter were significantly (P ≤ 0.05) greater in CG treatment than the SDG. The SDG treatment had significantly (P ≤ 0.05) less pasture herbage than CG areas in the spring (16%) and fall (26%) of 1997, and in the spring (22%) and fall (24%) of 1998, respectively. The SDG did not show any advantage over CG in improving soil physical characteristics and herbage production. Key Words: Bulk density, Cervus elaphus, moisture content, penetration resistance, pasture production

Laboratory and field evaluation of five soil water sensors

2004 ◽  
Vol 84 (4) ◽  
pp. 431-438 ◽  
Author(s):  
Q. Huang ◽  
O. O. Akinremi ◽  
R. Sri Rajan ◽  
P. Bullock
Keyword(s):  
Water Content ◽  
Bulk Density ◽  
Soil Water ◽  
Soil Water Content ◽  
Soil Depth ◽  
Field Evaluation ◽  
Soil Bulk Density ◽  
Laboratory Evaluation ◽  
Engineering Sciences ◽  
Probe Calibration

Accurate in situ determination of soil water content is important in many fields of agricultural, environmental, hydrological, and engineering sciences. As numerous soil water content sensors are available on the market today, the knowledge of their performance will aid users in the selection of appropriate sensors. The objectives of this study were to evaluate five soil water sensors in the laboratory and to determine if laboratory calibration is appropriate for the field. In this study, the performances of five sensors, including the Profile Probe™ (PP), ThetaProbe™ , Watermark™, Aqua-Tel™, and Aquaterr™ were compared in the laboratory. The PP and ThetaProbe™ were more accurate than the other soil water sensors, reproducing soil water content using factory recommended parameters. However, when PP was installed on a loamy sand in the field, the same soil that was used for the laboratory evaluation, it overestimated field soil water, especially at depth. Another laboratory experiment showed that soil water content readings from the PP were strongly influenced by soil bulk density. The higher the soil bulk density, the greater was the overestimation of soil water content. Two regression parameters, a0 and a1, which are used to convert the apparent dielectric constant to volumetric water content, were found to increase linearly with the soil bulk density in the range of 1.2 to 1.6 Mg m-3. Finally, the PP was calibrated in the field and a good calibration function was obtained with an r2 of 0.87 and RMSE of 2.7%. The values of a0 and a1 obtained in the field were different from factory recommended parameters (a0 = 2.4 versus 1.6 while a1 = 12.5 versus 8.4) and were independent of soil depth, bulk density, and texture. As such, individual field calibration will be necessary to obtain precise and accurate measurement of soil water content with this instrument. Key words: Soil water content, Profile Probe, calibration, soil water content sensor

scholarly journals Penetration resistance according to penetration rate, cone base size and different soil conditions

Bragantia ◽  
2014 ◽  
Vol 73 (2) ◽  
pp. 171-177 ◽  
Author(s):  
Daniel Dias Valadão Junior ◽  
Aloísio Biachini ◽  
Franciele Caroline Assis Valadão ◽  
Rodrigo Pengo Rosa
Keyword(s):  
Bulk Density ◽  
Penetration Rate ◽  
Penetration Resistance ◽  
Soil Bulk Density ◽  
Soil Conditions ◽  
Density Reduction ◽  
Soil Penetration Resistance ◽  
Base Size ◽  
The Relationship ◽  
Resistance To Penetration

This study aimed to evaluate the effect of penetration rate and the size of the cone base on the resistance to penetration under different soil moistures and soil bulk density. The experimental design was completely randomized in a 4x2x2x2 factorial arrangement, with the factors, soil bulk density of 1.0; 1.2; 1.4 and 1.6 Mg m-3, soil moisture at the evaluation of 0.16 and 0.22 kg kg-1, penetration rates of 0.166 and 30 mm s-1 and areas of the cone base of 10.98 and 129.28 mm² resulting in 32 treatments with 8 replicates. To ensure greater uniformity and similarity to field conditions, samples passed through cycles of wetting and drying. Only the interaction of the four factors was not significant. Resistance values varied with the density of the soil, regardless of moisture and penetration rate. Soil penetration resistance was influenced by the size of the cone base, with higher values for the smallest base independent of moisture and soil bulk density. The relationship between resistance to penetration and moisture is not always linear, once it is influenced by soil bulk density. Reduction in the area of the cone leads to an increase in the soil resistance to penetration.

Sign in / Sign up

Export Citation Format

Share Document