Eudragit S100 microparticles containing sodium pantoprazole: drug release, intestinal absorption and in vitro/ex vivo correlation

Aim: The intention of this investigation was to develop Pemetrexed Diacid (PTX)-loaded gelatine-cloisite 30B (MMT) nanocomposite for the potential oral delivery of PTX and the in vitro, and ex vivo assessment. Background: Gelatin/Cloisite 30 B (MMT) nanocomposites were prepared by blending gelatin with MMT in aqueous solution. Methods: PTX was incorporated into the nanocomposite preparation. The nanocomposites were investigated by Fourier Transmission Infra Red Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Scanning Electron Microscope (SEM) X-Ray Diffraction (XRD) and Confocal Laser Microscopy (CLSM). FT-IR of nanocomposite showed the disappearance of all major peaks which corroborated the formation of nanocomposites. The nanocomposites were found to have a particle size of 121.9 ± 1.85 nm and zeta potential -12.1 ± 0.63 mV. DSC thermogram of drug loaded nanocomposites indicated peak at 117.165 oC and 205.816 oC, which clearly revealed that the drug has been incorporated into the nanocomposite because of cross-linking of cloisite 30 B and gelatin in the presence of glutaraldehyde. Results: SEM images of gelatin show a network like structure which disappears in the nanocomposite. The kinetics of the drug release was studied in order to ascertain the type of release mechanism. The drug release from nanocomposites was in a controlled manner, followed by first-order kinetics and the drug release mechanism was found to be of Fickian type. Conclusion: Ex vivo gut permeation studies revealed 4 times enhancement in the permeation of drug present in the nanocomposite as compared to plain drug solution and were further affirmed by CLSM. Thus, gelatin/(MMT) nanocomposite could be promising for the oral delivery of PTX in cancer therapy and future prospects for the industrial pharmacy.

Download Full-text

Design and Evaluation of Long Acting Biodegradable PLGA Microspheres for Ocular Drug Delivery

Nanoscience &Nanotechnology-Asia ◽

10.2174/2210681210666191223144755 ◽

2019 ◽

Vol 10 ◽

Author(s):

Anjali Pandya ◽

Rajani Athawale ◽

Durga Puro ◽

Geeta Bhagwat

Keyword(s):

Particle Size ◽

Drug Release ◽

Degradation Products ◽

Ex Vivo ◽

Research Work ◽

Entrapment Efficiency ◽

Rational Approach ◽

Plga Microspheres ◽

Long Acting

Background: The research work involves development of PLGA biodegradable microspheres loaded with dexamethasome for intraocular delivery. Objective: To design and evaluate long acting PLGA microspheres for ocular delivery of dexamethasone. Method: Present formulation involves the development of long acting dexamethasone loaded microspheres composed of a biodegradable controlled release polymer, Poly(D, L- lactide-co-glycolide) (PLGA), for the treatment of posterior segment eye disorders intravitreally. PLGA with monomer ratio of 50:50 of lactic acid to glycolic acid was used to achieve a drug release up to 45 days. Quality by Design approach was utilized for designing the experiments. Single emulsion solvent evaporation technique along with high pressure homogenization was used to facilitate formation of microspheres. Results: Particle size evaluation, drug content and drug entrapment efficiency were determined for the microspheres. Particle size and morphology was observed using Field Emission Gun-Scanning Electron Microscopy (FEG-SEM) and microspheres were in the size range of 1-5 μm. Assessment of drug release was done using in vitro studies and transretinal permeation was observed by ex vivo studies using goat retinal tissues. Conclusion: Considering the dire need for prolonged therapeutic effect in diseases of the posterior eye, an intravitreal long acting formulation was designed. Use of biodegradable polymer with biocompatible degradation products was a rational approach to achieve this aim. Outcome from present research shows that developed microspheres would provide a long acting drug profile and reduce the frequency of administration thereby improving patient compliance.

Download Full-text

Synthesis and characterization of Chitosan-Catechol conjugates: Development and in vitro, in silico and in vivo evaluation of mucoadhesive pellets of lafutidine

Journal of Bioactive and Compatible Polymers ◽

10.1177/0883911521997849 ◽

2021 ◽

pp. 088391152199784

Author(s):

Loveleen Kaur ◽

Ajay Kumar Thakur ◽

Pradeep Kumar ◽

Inderbir Singh

Keyword(s):

Drug Release ◽

In Silico ◽

Ex Vivo ◽

Strong Interactions ◽

Dissolution Time ◽

Sem Images ◽

In Vivo Evaluation ◽

Release Studies

Present study was aimed to synthesize and characterize Chitosan-Catechol conjugates and to design and develop mucoadhesive pellets loaded with lafutidine. SEM images indicated the presence of fibrous structures responsible for enhanced mucoadhesive potential of Chitosan-Catechol conjugates. Thermodynamic stability and amorphous nature of conjugates was confirmed by DSC and XRD studies respectively. Rheological studies were used to evaluate polymer mucin interactions wherein strong interactions between Chitosan-Catechol conjugate and mucin was observed in comparison to pristine chitosan and mucin. The mucoadhesion potential of Chitosan-Catechol (Cht-C) versus Chitosan (Cht) was assessed in silico using molecular mechanics simulations and the results obtained were compared with the in vitro and ex vivo results. Cht-C/mucin demonstrated much higher energy stabilization (∆E ≈ −65 kcal/mol) as compared to Cht/mucin molecular complex. Lafutidine-loaded pellets were prepared from Chitosan (LPC) and Chitosan-Catechol conjugates (LPCC) and were evaluated for various physical properties viz. flow, circularity, roundness, friability, drug content, particle size and percent mucoadhesion. In vitro drug release studies on LPC and LPCC pellets were performed for computing t50%, t90% and mean dissolution time. The values of release exponent from Korsmeyer-Peppas model was reported to be 0.443 and 0.759 for LPC and LPCC pellets suggesting Fickian and non-Fickian mechanism representing drug release, respectively. In vivo results depicted significant controlled release and enhanced residence of the drug after being released from the chitosan-catechol coated pellets. Chitosan-Catechol conjugates were found to be a promising biooadhesive polymer for the development of various mucoadhesive formulations.

Download Full-text

CHEMICAL MODIFICATION, CHARACTERIZATION AND EVALUATION OF MUCOADHESIVE POTENTIALITY OF ASSAM BORA RICE STARCH

International Journal of Pharmacy and Pharmaceutical Sciences ◽

10.22159/ijpps.2017v9i9.20108 ◽

2017 ◽

Vol 9 (9) ◽

pp. 132 ◽

Cited By ~ 1

Author(s):

Abdul Baquee Ahmed ◽

Iman Bhaduri

Keyword(s):

Drug Delivery ◽

Drug Release ◽

Sustained Release ◽

Chemical Modification ◽

Ex Vivo ◽

Rice Starch ◽

Modified Starch ◽

Native Starch ◽

Ft Ir

Objective: The objective of the present study was to chemical modification, characterization and evaluation of mucoadhesive potentiality of Assam bora rice starch as potential excipients in the sustained release drug delivery system. Methods: The starch was isolated from Assam bora rice and esterified using thioglycolic acid and characterized by Fourier transform infrared spectroscopy (FT-IR), Differential scanning calorimetry (DSC) and Nuclear magnetic resonance (NMR). The 10% w/v gel formulation based on modified bora rice starch loaded with irinotecan (0.6%) was prepared and evaluated for various rheological properties, ex-vivo mucoadhesion using goat intestine and in vitro drug release study in phosphate buffer pH 6.8.Results: The chemical modification was confirmed by FT-IR and NMR studies with the presence of the peak at 2626.74 cm-1 and a singlet at 2.51 respectively due to–SH group. Ex-vivo mucoadhesion studies showed 6.6 fold increases in mucoadhesion of the modified starch with compared to native starch (46.3±6.79g for native starch; 308.7±95.31g for modified starch). In vitro study showed 89.12±0.84 % of drug release after 6 h in phosphate buffer pH 6.8 and the release kinetics followed Non-Fickian diffusion.Conclusion: The modified Assam bora rice starch enhanced a mucoadhesive property of the native starch and thus, can be explored in future as a potential excipient for the sustained release mucoadhesive drug delivery system.

Download Full-text

DEVELOPMENT AND EVALUATION OF NANOPARTICULATE BASED IN-SITU GELLING SYSTEM FOR NASAL DRUG DELIVERY OF AN ANTI-EPILEPTIC DRUG

INDIAN DRUGS ◽

10.53879/id.54.09.10774 ◽

2017 ◽

Vol 54 (09) ◽

pp. 83-85

Author(s):

A Ambavkar ◽

◽

N. Desai

Keyword(s):

Drug Release ◽

Ex Vivo ◽

Entrapment Efficiency ◽

Poloxamer 407 ◽

Nasal Drug Delivery ◽

Anti Epileptic Drug ◽

Nanolipid Carriers ◽

In Situ Nasal Gel

The objective of the study was to develop and evaluate nanolipid carriers based in situ gel of Carbamazepine, for brain delivery through intranasal route. The non – invasive nasal route can provide rapid delivery of drugs directly to the central nervous system by bypassing the blood brain barrier. The nanolipid carriers of carbamazepine as in situ nasal gel can prolong the drug release for control of repetitive seizures and were prepared by Phase Inversion Temperature technique. The retention of the carriers in the nasal cavity was improved by using Poloxamer 407 as thermoresponsive and Carbopol 974P as mucoadhesive gelling polymers, respectively. The developed gel was evaluated for particle size, polydispersity index, zeta potential, morphology, entrapment efficiency, mucoadhesive and thermoresponsive behaviour, in vitro drug release, ex vivo permeation and nasociliotoxicity. The gel showed sustained release over prolonged periods and was found to be non-toxic to the sheep nasal mucosa.

Download Full-text

Nanostructured Lipid Carrier Gel for the Dermal Application of Lidocaine: Comparison of Skin Penetration Testing Methods

Pharmaceutics ◽

10.3390/pharmaceutics11070310 ◽

2019 ◽

Vol 11 (7) ◽

pp. 310 ◽

Cited By ~ 9

Author(s):

Stella Zsikó ◽

Kendra Cutcher ◽

Anita Kovács ◽

Mária Budai-Szűcs ◽

Attila Gácsi ◽

...

Keyword(s):

Drug Release ◽

Human Skin ◽

Ex Vivo ◽

Study Drug ◽

Skin Penetration ◽

Human Epidermis ◽

Nanostructured Lipid Carrier ◽

Experimental Findings

The aim of this research was to investigate the stability of a lidocaine-loaded nanostructured lipid carrier dispersion at different temperatures, formulate a nanostructured lipid carrier gel, and test the penetration profile of lidocaine from the nanostructured lipid carrier gel using different skin penetration modeling methods. The formulations were characterized by laser diffraction, rheological measurements and microscopic examinations. Various in vitro methods were used to study drug release, diffusion and penetration. Two types of vertical Franz diffusion cells with three different membranes, including cellulose, Strat-M®, and heat separated human epidermis were used and compared to the Skin-parallel artificial membrane permeability assay (PAMPA) method. Results indicated that the nanostructured lipid carrier dispersion had to be gelified as soon as possible for proper stability. Both the Skin-PAMPA model and Strat-M® membranes correlated favorably with heat separated human epidermis in this research, with the Strat-M® membranes sharing the most similar drug permeability profile to an ex vivo human skin model. Our experimental findings suggest that even when the best available in vitro experiment is selected for modeling human skin penetration to study nanostructured lipid carrier gel systems, relevant in vitro/in vivo correlation should be made to calculate the drug release/permeation in vivo. Future investigations in this field are still needed to demonstrate the influence of membranes and equipment from other classes on other drug candidates.

Download Full-text

FORMULATION, OPTIMIZATION, CHARACTERIZATION AND IN VIVO ANTI-ULCER ACTIVITY OF ESOMEPRAZOLE MAGNESIUM TRIHYDRATE GASTRORESISTANT MICROSPHERES

International Journal of Pharmacy and Pharmaceutical Sciences ◽

10.22159/ijpps.2017v9i1.15437 ◽

2016 ◽

Vol 9 (1) ◽

pp. 273

Author(s):

Krutika Sawant ◽

Mitali Patel ◽

Jiten Patel ◽

Piyush Mundada

Keyword(s):

Particle Size ◽

Drug Release ◽

Intestinal Absorption ◽

Ulcer Formation ◽

Scanning Calorimetry ◽

Aqueous Solvent ◽

Release Study ◽

Esomeprazole Magnesium

Objective: The objective of the present investigation was to prepare gastro-resistant microspheres of esomeprazole magnesium trihydrate (EMT) to prevent its degradation in the acidic environment of the stomach and enhance its bioavailability via intestinal absorption.Methods: EMT loaded gastro-resistant microspheres were prepared using hypromellose acetate succinate (HPMCAS) as the gastro-resistant polymer by ‘non-aqueous solvent evaporation’ technique. A 3-factor 3 level factorial design was used to optimise EMT: HPMCAS ratio, the concentration of Span 80 and stirring speed with respect to percent entrapment efficiency and particle size. Further characterization was carried out using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), In vitro release study and In vivo anti-ulcer activity.Results: Fourier transform infrared (FTIR) study indicated compatibility between drug and polymer. DSC study revealed that the drug was molecularly dispersed in the polymer. The optimised batch showed 49.63±1.23% drug entrapment and 170.12±3.36 μm particle size. SEM study showed that microspheres were spherical in shape. In vitro drug release study showed only 4.28±1.23% drug release in simulated gastric media in 2 hr and 93.46±1.20% release in simulated intestinal media after 1 hr from the optimised batch.Conclusion: Results of in vitro release studies indicated the gastro-resistant nature of the developed microspheres. In vivo anti-ulcer activity demonstrated that EMT loaded microspheres were able to significantly reduce ethanol-induced ulcer formation in rats’ stomach as compared to the aqueous solution of EMT. So it can be concluded that the developed gastro-resistant microspheres of EMT prevented drug release in the stomach which would lead to a significant improvement in its bioavailability through enhanced intestinal absorption

Download Full-text

DEVELOPMENT AND EVALUATION OF TRANSDERMAL FILM CONTAINING SOLID LIPID NANOPARTICLES OF RIVASTIGMINE TARTRATE

International Journal of Applied Pharmaceutics ◽

10.22159/ijap.2017v9i6.22354 ◽

2017 ◽

Vol 9 (6) ◽

pp. 85

Author(s):

G. Ravi ◽

N. Vishal Gupta

Keyword(s):

Tensile Strength ◽

Drug Release ◽

Ex Vivo ◽

Skin Permeation ◽

Cost Effective ◽

In Vitro Drug Release ◽

Drug Content ◽

Study Results ◽

Transdermal Film

Objective: The objective of present investigation was to develop rivastigmine tartrate transdermal film employing factorial design.Methods: The formulations were designed by Design-Expert software-version10. A series of films were prepared by solvent casting method using polymers, plasticizer, permeation enhancer and other solvents. Transdermal films were evaluated for flatness, drug content, tensile strength, in vitro drug release and ex vivo skin permeation study.Results: The flatness was found 100% (percentage) for all film formulations. The drug content of transdermal film was found in the range of 96.51±0.2 to 98.81±0.3%. The tensile strength of transdermal film was found in the range of 6.28±0.06 to 11.56±0.03 N/mm2 (newton/millimeter2) and in vitro drug release at 24th h (hour) was found in the range of 86.24±0.25 to 96.1±0.48%% for various formulations and ex vivo skin permeation study results at 24th h was found in the range of 85.83±0.74 to 97.36±0.93%.Conclusion: These results support the feasibility of developing transdermal film of rivastigmine tartrate for human applications. Thus, transdermal delivery of rivastigmine tartrate film is a safe, painless and cost effective drug delivery system for Alzheimer’s patients.

Download Full-text

Characterization of bilayered matrix-type mucoadhesive buccal films containing tizanidine hydrochloride and piroxicam

Tropical Journal of Pharmaceutical Research ◽

10.4314/tjpr.v20i11.1 ◽

2021 ◽

Vol 20 (11) ◽

pp. 2241-2248

Author(s):

M. Yasmin Begum ◽

Ali Alqahtani

Keyword(s):

Drug Release ◽

Patient Compliance ◽

Residence Time ◽

Ex Vivo ◽

Drug Bioavailability ◽

In Vitro Drug Release ◽

Surface Ph ◽

Folding Endurance ◽

Buccal Films

Purpose: To formulate and characterize tizanidine hydrochloride (TZN) and piroxicam (PRX)-loaded bilayer mucoadhesive buccal films with an intention to improve the bioavailability and patient compliance in pain management.Methods: Bilayer buccal films were prepared by solvent evaporation technique using hydroxypropyl methylcellulose (HPMC) 15cps and polyvinylpyrrolidone (PVP K30 as immediate release (IR) layer forming polymers and HPMC K15 M, PVP K 90 along with various muco adhesive polymers (Carbopol P934, sodium alginate, etc), as sustained release (SR) layer forming polymers. The prepared films werecharacterized for thickness, weight variation, folding endurance, surface pH, swelling index,mucoadhesive strength, in vitro residence time, in vitro drug release, ex vivo permeation and drug release kinetics.Results: The prepared films were of largely uniform thickness, weight and drug content. Moisture loss (%) and folding endurance were satisfactory. Surface pH was compatible with salivary fluid. Disintegration time was 85 s for F1 and 115 s for F2 of IR films. In vitro dissolution studies showed 99.12 ± 1.2 % (F1) and 90.36 ± 1.8 % (F2) were released in 45 min. Based on the above results, F1 was chosen as the optimum formulation to be combined with SR layer of TZN. Amongst the SR layers of TZN in vitro drug release. The findings show that of F2 was 98.38 ± 0.82 % and correlated with ex vivo release. Drug release followed zero order release kinetics and mechanism of drug release was non-Fickian type diffusion. In vitro residence time was greater than 5 h.Conclusion: The findings show that the bilayer buccal films demonstrate the dual impact of deliveringPRX instantly from the IR layer, with good controlled release and permeation of TZN from the SR layer, thus providing enhanced therapeutic efficacy, drug bioavailability and patient compliance.

Download Full-text

Formulation and Evaluation of Tacrolimus Transdermal Gel

Journal of Drug Delivery and Therapeutics ◽

10.22270/jddt.v9i6-s.3770 ◽

2019 ◽

Vol 9 (6-s) ◽

pp. 110-118

Author(s):

CH. Suryakumari ◽

M. Narender ◽

K. Umasankar ◽

Siva Prasad Panda ◽

S.N. Koteswara Rao ◽

...

Keyword(s):

Drug Release ◽

Ex Vivo ◽

Release Kinetics ◽

In Vitro Drug Release ◽

Surface Ph ◽

Abdominal Skin ◽

Ex Vivo Permeation ◽

Ex Vivo Permeation Study ◽

Carbopol 934P

The present investigation is concerned with formulation and evaluation of Transdermal gels of Tacrolimus, anti-psoriasis drug, to circumvent the first pass effect and to improve its bioavailability with reduction in dosing frequency and dose related side effects. Twelve formulations were developed with varying concentrations of polymers like Carbopol 934P, HPMCK4M and Sodium CMC. The gels were tested for clarity, Homogeneity, Spreadability, Extrudability, Viscosity, surface pH, drug Content uniformity, in-vitro drug diffusion study and ex-vivo permeation study using rat abdominal skin. FTIR studies showed no evidence on interactions between drug, polymers and excipients. The best in-vitro drug release profile was achieved with the formulation F4 containing 0.5 mg of exhibited 6 hr drug release i.e. 98.68 % with desired therapeutic concentration which contains the drug and Carbopol 934p in the ratio of 1:2. The surface pH, drug content and viscosity of the formulation F4 was found to be 6.27, 101.3% and 3, 10,000cps respectively. The drug permeation from formulation F4 was slow and steady and 0.89gm of tacrolimus could permeate through the rat abdominal skin membrane with a flux of 0.071 gm hr-1 cm-2. The in-vitro release kinetics studies reveal that all formulations fit well with zero order kinetics followed by non-Fickian diffusion mechanism. Keywords: Transdermal gel, Viscosity, In-vitro drug release, In-vitro drug release kinetics study, Ex-vivo permeation study

Download Full-text