Design and implementation of a power distribution system adopting overcurrent protection

2020 ◽  
Vol 124 (1281) ◽  
pp. 1789-1797
Author(s):  
M. Bekhti ◽  
M. Bensaada ◽  
M. Beldjehem
Keyword(s):  
Power Systems ◽  
Power System ◽  
Power Distribution ◽  
Distribution System ◽  
Electrical Power ◽  
Electrical Power System ◽  
Complete Evaluation ◽  
Power Distribution System ◽  
Design And Implementation ◽  
Overcurrent Protection

ABSTRACTOne of the most critical aspects of a small satellite is the electrical power system (EPS) since the electrical power is necessary for the satellite to operate correctly during its predefined lifetime. The electrical power system consists mainly of solar cells, batteries, voltage converters and protection circuits. The electrical power system is responsible of providing stable power to the rest of the satellite subsystems.In satellite electrical power systems, overcurrent protection is now becoming an important function handled by the power distribution module (PDM). This paper proposes a method to evaluate the suggested protection. With the proposed procedure we should be able to verify that every possible failure does not travel through the EPS and cause a fatal degradation of the electrical power system. This will allow a complete evaluation of functionality of the protection hardware.This paper discusses the design and implementation of the power distribution module (PDM) for the coming generation of small satellites for the Algerian Space Agency (ASAL). The design must provide a reliable protection for the subsystems from the overcurrent associated with a device failure.

Design of Low-Voltage Power Distribution System

2013 ◽  
Vol 791-793 ◽  
pp. 1889-1891
Author(s):  
Yan Li Fan ◽  
Qing En Li
Keyword(s):  
Power System ◽  
Power Distribution ◽  
Distribution System ◽  
Low Voltage ◽  
Electrical Power ◽  
Scientific Basis ◽  
Voltage Distribution ◽  
Electrical Power System ◽  
Power Distribution System ◽  
High Rise

The low-voltage distribution system is the key component of the electrical power system. Some analysis and research of the low-voltage distribution system is carried out in this paper, which provides some scientific basis to design the low-voltage distribution system. Firstly, the summarize of low-voltage distribution system is taken. The influence to productions and livings of low-voltage distribution system is introduced. Secondly, the mode of connection and design philosophy of low-voltage distribution system is studied in detail, especially the high-rise buildings low-voltage distribution system is concluded and summarized.

scholarly journals Review of Steady-State Electric Power Distribution System Datasets

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4826
Author(s):  
Steffen Meinecke ◽  
Leon Thurner ◽  
Martin Braun
Keyword(s):  
Steady State ◽  
Power Systems ◽  
Power System ◽  
Power Distribution ◽  
Distribution System ◽  
New Technologies ◽  
Electrical Power ◽  
Background Information ◽  
Electrical Power Systems ◽  
Power Distribution System

Publicly available grid datasets with electric steady-state equivalent circuit models are crucial for the development and comparison of a variety of power system simulation tools and algorithms. Such algorithms are essential to analyze and improve the integration of distributed energy resources (DERs) in electrical power systems. Increased penetration of DERs, new technologies, and changing regulatory frameworks require the continuous development of the grid infrastructure. As a result, the number and versatility of grid datasets, which are required in power system research, increases. Furthermore, the used grids are created by different methods and intentions. This paper gives orientation within these developments: First, a concise overview of well-known, publicly available grid datasets is provided. Second, background information on the compilation of the grid datasets, including different methods, intentions and data origins, is reviewed and characterized. Third, common terms to describe electric steady-state distribution grids, such as representative grid or benchmark grid, are assembled and reviewed. Recommendations for the use of these grid terms are made.

A Gabor Filter Based Approach for Locating Faults in Distribution

2011 ◽  
Vol 403-408 ◽  
pp. 5007-5014
Author(s):  
Pratul Arvind ◽  
Rudra Prakash Maheshwari
Keyword(s):  
Power Systems ◽  
Power Distribution ◽  
Distribution System ◽  
Fault Location ◽  
Gabor Filter ◽  
Electrical Power ◽  
Electrical Power System ◽  
Power Distribution System ◽  
Electric Power Distribution ◽  
Node Distribution

Electric Power Distribution System is a complex network of electrical power system. Also, large number of lines on a distribution system experiences regular faults which lead to high value of current. Speedy and precise fault location plays a pivotal role in accelerating system restoration which is a need of modern day. Unlike transmission system which involves a simple connection, distribution system has a very complicated structure thereby making it a herculean task to design the network for computational analysis. In this paper, the authors have simulated IEEE 13- node distribution system using PSCAD which is an unbalanced system and current samples are generated at the substation end. Considering the application of signal processing tools to power systems a talk of modern day research, Gabor decomposition of the current samples are also presented which is utilised for locating all ten types of faults. It is kept in mind that Gabor transform has not been applied to current samples of distribution system as per the literature available till date.

scholarly journals Impact of Plug-in Electric Vehicles Integrated into Power Distribution System based on Voltage Dependent Power Flow

2018 ◽  
Author(s):  
Yuttana Kongjeen ◽  
Krischonme Bhumkittipich
Keyword(s):  
Power System ◽  
Electric Vehicles ◽  
Power Distribution ◽  
Distribution System ◽  
Power Flow ◽  
Electrical Power ◽  
Electrical Power System ◽  
Power Distribution System ◽  
Voltage Dependent ◽  
Voltage Deviation

This paper proposes the impact of plug-in electric vehicles integrated into power distribution system based on voltage dependent control. The plug-in electric vehicles was modeled as the static load model in power distribution systems under balanced load condition. The power flow analysis is determined by using the basic parameters of the electrical network. The main point of this study are compare with voltage magnitude profiles, load voltage deviation, and total power losses of the electrical power system. There are investigating the affected from constant power load, constant current load, constant impedance load and plug-in electric vehicles load, respectively. The IEEE 33 bus test system is used to test the proposed method by assigning each load type to a balanced load in steady state and applied the solving methodology based on the bus injection to branch injection matric, branch current to bus voltage matrix, and current injection matrix to solve the power flow problem. The simulation results showed that the plug-in electric vehicles load had the lowest impact compared to other loads. The lowest plug-in values for the electric vehicle loads were 0.062, 119.67 kW and 79.31 kVar for the load voltage deviation, total active power loss and total reactive power loss, respectively. Therefore, this study can be verified that the plug-in electric vehicles load were affected to the lowest of the electrical power system in condition to same sizing and position. So that, in condition to the plug-in electric vehicles load added into the electrical power system with the conventional load type or complex load type could be considered that the affected from the plug-in electric vehicles load in next study.

scholarly journals FCM and Statistical Based Approach for Classification and Location of Faults in Electrical Distribution System

2011 ◽  
pp. 64-68
Author(s):  
Pratul Arvind ◽  
Rudra prakash Maheswari
Keyword(s):  
Expectation Maximization ◽  
Power Distribution ◽  
Distribution System ◽  
Fault Location ◽  
Electrical Power ◽  
Electrical Power System ◽  
Power Distribution System ◽  
Electric Power Distribution ◽  
Node Distribution ◽  
System Restoration

Electric Power Distribution System is a complex network of electrical power system. Also, large number of lines on a distribution system experiences regular faults which lead to high value of current. Speedy and precise fault location plays a pivotal role in accelerating system restoration which is a need of modern day. Unlike transmission system which involves a simple connection, distribution system has a very complicated structure thereby making it a herculean task to design the network for computational analysis. In this paper, the authors have simulated IEEE 13- node distribution system using PSCAD which is an unbalanced system and current samples are generated at the substation end. A Fuzzy c-mean (FCM) and statistical based approach has been used. Samples are transformed as clusters by use of FCM and fed to Expectation- Maximization (EM) algorithm for classifying and locating faults in an unbalanced distribution system. Further, it is to be kept in mind that the combination has not been used for the above purpose as per the literature available till date.

scholarly journals Preliminary Design of the Electrical Power Systems for DTT Nuclear Fusion Plant

2021 ◽  
Vol 11 (12) ◽  
pp. 5446
Author(s):  
Marzia Caldora ◽  
Maria Carmen Falvo ◽  
Alessandro Lampasi ◽  
Gianluca Marelli
Keyword(s):  
Power Systems ◽  
Power Distribution ◽  
Distribution System ◽  
Power Flow ◽  
Nuclear Fusion ◽  
Electrical Power ◽  
Simulation Models ◽  
Electrical Power Systems ◽  
Power Distribution System ◽  
Electrical Loads

The realization of the Divertor Tokamak Test (DTT) facility is one of the key milestones of the European Roadmap, aiming to explore alternative power exhaust solutions for DEMO, the first nuclear-fusion power plant that will be connected to the European grid. For the actual implementation of the DTT and DEMO plants, it is necessary to define the structure of the internal electric power distribution system, able to supply unconventional loads with a sufficient level of reliability. The present paper reports the preliminary studies for the feasibility and realization of the electrical power systems of DTT, describing the methodology adopted to obtain a first distribution configuration and providing some simulation results. In particular, the first stage of the study deals with the survey and characterization of the electrical loads, which allows defining a general layout of the facility and size the main electrical components. To verify the correctness of the assumptions, simulation models of the grid were implemented in the DIgSILENT PowerFactory software in order to carry out power flow and fault analyses.

scholarly journals Analysis of The Failure Protection System 20 KV CBO T75B Substation Malibu Feeder PT PLN (Persero) UP3 Menteng

2021 ◽  
Vol 6 (2) ◽  
pp. 1422
Author(s):  
Doni Abdul Mukti ◽  
Budi Sudiarto
Keyword(s):  
Power System ◽  
Electric Power ◽  
Power Distribution ◽  
Distribution System ◽  
Short Circuit ◽  
Performance Testing ◽  
Electric Power System ◽  
Protection System ◽  
Electrical Power System ◽  
Power Distribution System

Protection is a safety in the electric power system installed in the electric power distribution system, power transformer, electric power transmission, and electric generator used to secure the power system electricity from electrical disturbances or overloads by separating the disturbed parts of the electric power system from the undisturbed electrical power system so that the undisturbed electrical system can continue to work. The protection system at the T75B substation has a work failure where when there is a short circuit on the consumer side, it causes the PMT (Power Breaker) for the Malibu Feeder at the Kebon Sirih Substation to trip while the CBO (Circuit Breaker Outgoing) cubicle at the T75B substation does not trip. This resulted in an unexpected widespread blackout. To find out the cause of the failure of the protection system, several tests and analyzes were carried out, namely protection design testing, protection relay coordination testing, protection system construction analysis, protection equipment performance testing. It is hoped that the test results can be used as a reference for improvement so that similar failures do not recur.

Reducing the Losses in the Electrical Power System of Kosovo by Implementation of New Type of Transformers in the Power Distribution System

2016 ◽  
Vol 856 ◽  
pp. 331-336
Author(s):  
Rexhep Shaqiri
Keyword(s):  
Power System ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Network ◽  
Electric Power System ◽  
Power Losses ◽  
Electrical Power System ◽  
Power Distribution System ◽  
Electrical Distribution ◽  
Electrical Distribution Network

This paper contains a strategy to minimize the power losses in the electrical distribution network of Kosovo. In order to develop the strategy, a model was constructed to simulate an electrical distribution network, and different parameters were included that helped in estimation of the technical power losses in the medium voltage (MV) distribution network. The main objective of this paper is to present approach to minimize technical and non-technical losses in power systems. The analysis of the Kosovo electric power system was performed by means of PSS/E 3.3 software. The results indicate options for reduction of the loses by replacement of old type of transformers and preparation of the MV system for upgrade and change the voltage level from 10 kV to 20 kV. As a first step new 110/10kV transformers can be installed, designed to be reconnected in the future to 110/20kV.

scholarly journals Optical Voltage Transformer Based on FBG-PZT for Power Quality Measurement

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2699
Author(s):  
Marceli N. Gonçalves ◽  
Marcelo M. Werneck
Keyword(s):  
Power System ◽  
Power Quality ◽  
Distribution System ◽  
Electrical Power ◽  
Quality Measurement ◽  
Pockels Effect ◽  
Electrical Power System ◽  
Voltage Transformer ◽  
Technical Literature ◽  
Distribution Lines

Optical Current Transformers (OCTs) and Optical Voltage Transformers (OVTs) are an alternative to the conventional transformers for protection and metering purposes with a much smaller footprint and weight. Their advantages were widely discussed in scientific and technical literature and commercial applications based on the well-known Faraday and Pockels effect. However, the literature is still scarce in studies evaluating the use of optical transformers for power quality purposes, an important issue of power system designed to analyze the various phenomena that cause power quality disturbances. In this paper, we constructed a temperature-independent prototype of an optical voltage transformer based on fiber Bragg grating (FBG) and piezoelectric ceramics (PZT), adequate to be used in field surveys at 13.8 kV distribution lines. The OVT was tested under several disturbances defined in IEEE standards that can occur in the electrical power system, especially short-duration voltage variations such as SAG, SWELL, and INTERRUPTION. The results demonstrated that the proposed OVT presents a dynamic response capable of satisfactorily measuring such disturbances and that it can be used as a power quality monitor for a 13.8 kV distribution system. Test on the proposed system concluded that it was capable to reproduce up to the 41st harmonic without significative distortion and impulsive surges up to 2.5 kHz. As an advantage, when compared with conventional systems to monitor power quality, the prototype can be remote-monitored, and therefore, be installed at strategic locations on distribution lines to be monitored kilometers away, without the need to be electrically powered.

Analysis between graph-based and Power Transfer Distribution Factors (PTDF)-based model reduction methods in Electric Power Systems

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Diego A. Monroy-Ortiz ◽  
Sergio A. Dorado-Rojas ◽  
Eduardo Mojica-Nava ◽  
Sergio Rivera
Keyword(s):  
Power Systems ◽  
Power System ◽  
Model Reduction ◽  
Electrical Power ◽  
Schur Complement ◽  
Power Transfer ◽  
Electrical Power System ◽  
Admittance Matrix ◽  
Test Beds ◽  
Power Transfer Distribution Factors

Abstract This article presents a comparison between two different methods to perform model reduction of an Electrical Power System (EPS). The first is the well-known Kron Reduction Method (KRM) that is used to remove the interior nodes (also known as internal, passive, or load nodes) of an EPS. This method computes the Schur complement of the primitive admittance matrix of an EPS to obtain a reduced model that preserves the information of the system as seen from to the generation nodes. Since the primitive admittance matrix is equivalent to the Laplacian of a graph that represents the interconnections between the nodes of an EPS, this procedure is also significant from the perspective of graph theory. On the other hand, the second procedure based on Power Transfer Distribution Factors (PTDF) uses approximations of DC power flows to define regions to be reduced within the system. In this study, both techniques were applied to obtain reduced-order models of two test beds: a 14-node IEEE system and the Colombian power system (1116 buses), in order to test scalability. In analyzing the reduction of the test beds, the characteristics of each method were classified and compiled in order to know its advantages depending on the type of application. Finally, it was found that the PTDF technique is more robust in terms of the definition of power transfer in congestion zones, while the KRM method may be more accurate.

Sign in / Sign up

Export Citation Format

Share Document