scholarly journals Streaming flow by oscillating bubbles: quantitative diagnostics via particle tracking velocimetry

2017 ◽  
Vol 820 ◽  
pp. 529-548 ◽  
Author(s):  
Rocío Bolaños-Jiménez ◽  
Massimiliano Rossi ◽  
David Fernandez Rivas ◽  
Christian J. Kähler ◽  
Alvaro Marin
Keyword(s):  
Particle Tracking ◽  
Acoustic Streaming ◽  
Three Dimensional ◽  
Theoretical Models ◽  
Flow Strength ◽  
Oscillating Bubbles ◽  
Linear Oscillation ◽  
The Stability ◽  
Streaming Flows ◽  
Streaming Flow

Oscillating microbubbles can be used as microscopic agents. Using external acoustic fields they are able to set the surrounding fluid into motion, erode surfaces and even to carry particles attached to their interfaces. Although the acoustic streaming flow that the bubble generates in its vicinity has been often observed, it has never been measured and quantitatively compared with the available theoretical models. The scarcity of quantitative data is partially due to the strong three-dimensional character of bubble-induced streaming flows, which demands advanced velocimetry techniques. In this work, we present quantitative measurements of the flow generated by single and pairs of acoustically excited sessile microbubbles using a three-dimensional particle tracking technique. Using this novel experimental approach we are able to obtain the bubble’s resonant oscillating frequency, study the boundaries of the linear oscillation regime, give predictions on the flow strength and the shear in the surrounding surface and study the flow and the stability of a two-bubble system. Our results show that velocimetry techniques are a suitable tool to make diagnostics on the dynamics of acoustically excited microbubbles.

scholarly journals Visualization of Three-Dimensional Acoustic Streaming Flow Patterns around an Inclined Triangular Obstruction using Digital In-Line Holographic Micro-Particle Tracking Velocimetry

2021 ◽  
Vol 1 (1) ◽  
Author(s):  
Sheng Po Hung ◽  
Wei-Hsin Tien
Keyword(s):  
Current System ◽  
Low Cost ◽  
Acoustic Streaming ◽  
Back Propagation ◽  
Three Dimensional ◽  
Local Maximum ◽  
Tracer Particles ◽  
Inclined Angle ◽  
Measurable Range ◽  
Streaming Flow

Acoustic Streaming is a flow phenomenon with many applications in the field of microfluidics, such as micro mixing[1, 2] and particle manipulation[3]. With the manufacturing techniques evolves, more complicated geometries can be designed for microfluidic device and 3-D acoustic streaming patterns may occurs. In this study, 3-D trajectories of particle induced by acoustic streaming around an inclined triangular obstruction in a microchannel were visualized by a volumetric tracking method using Digital Inline Holographic Microscopy (DIHM)[4-6]. The triangular obstruction has a tip angle of 20° and an inclined angle of 30°. The acoustic streaming is created under 12 kHz oscillation of a piezo plate driven by 20V voltage. Illuminated by a 450nm continuous laser, the magnified hologram of the motion of 1.79μm tracer particles was recorded by a low-cost 10X industrial microscope with a machine vision camera of 10 fps (frames per second). Using RayleighSommerfeld back-propagation method[7], particle locations was reconstructed frame by frame and 3-D tracking of individual particles was performed afterwards. The trajectories of each particle were reconstructed to reveal the vortical structure of the acoustic streaming flow. For the current system setup, the measurable range was estimated to be 550×685×840 μm3. The 3-D location reconstruction accuracy was verified with a calibration target and the location sensitivity was found to be linear throughout the measurable range. Reconstruction at different depth locations show that the dick-shaped calibration dots and the spherical polystyrene particles have different intensity profiles. The calibration dots show local minimum of intensity at the correct depth location, while polystyrene particles show local maximum of intensity instead. Resolved particle trajectories show that the acoustic streaming flows cause particles to move with 3-D spiral shaped motions near the side of the triangular obstruction, while particles away from the obstruction shows planar motions.

scholarly journals Outer Acoustic Streaming Flow Driven by Asymmetric Acoustic Resonances

Micromachines ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 65
Author(s):  
Junjun Lei ◽  
Gaokun Zheng ◽  
Zhen Yao ◽  
Zhigang Huang
Keyword(s):  
Standing Wave ◽  
Slip Velocity ◽  
Acoustic Pressure ◽  
Acoustic Radiation ◽  
Acoustic Streaming ◽  
Acoustic Standing Wave ◽  
Acoustic Resonances ◽  
Streaming Flows ◽  
Limiting Velocity ◽  
Streaming Flow

While boundary-driven acoustic streaming resulting from the interaction of sound, fluids and walls in symmetric acoustic resonances have been intensively studied in the literature, the acoustic streaming fields driven by asymmetric acoustic resonances remain largely unexplored. Here, we present a theoretical and numerical analysis of outer acoustic streaming flows generated over a fluid–solid interface above which a symmetric or asymmetric acoustic standing wave is established. The asymmetric standing wave is defined by a shift of acoustic pressure in its magnitude, i.e., S0, and the resulting outer acoustic streaming is analyzed using the limiting velocity method. We show that, in symmetric acoustic resonances (S0 = 0), on a slip-velocity boundary, the limiting velocities always drive fluids from the acoustic pressure node towards adjacent antinodes. In confined geometry where a slip-velocity condition is applied to two parallel walls, the characteristics of the obtained outer acoustic streaming replicates that of Rayleigh streaming. In an asymmetric standing wave where S0 ≠ 0, however, it is found that the resulting limiting velocity node (i.e., the dividing point of limiting velocities) on the slip-velocity boundary locates at a different position to acoustic pressure node and, more importantly, is shown to be independent of S0, enabling spatial separation of acoustic radiation force and acoustic streaming flows. The results show the richness of boundary-driven acoustic streaming pattern variations that arise in standing wave fields and have potentials in many microfluidics applications such as acoustic streaming flow control and particle manipulation.

A Liquid Metal Flow Between Two Coaxial Cylinders System

2019 ◽  
Vol 11 (1) ◽  
pp. 79-86
Author(s):  
Abdelkrim Merah ◽  
Ridha Kelaiaia ◽  
Faiza Mokhtari
Keyword(s):  
Couette Flow ◽  
Metal Flow ◽  
Three Dimensional ◽  
Liquid Sodium ◽  
Taylor Vortex ◽  
Turbulent Regime ◽  
Coaxial Cylinders ◽  
Concentric Cylinders ◽  
Ideal Tool ◽  
The Stability

Abstract The Taylor-Couette flow between two rotating coaxial cylinders remains an ideal tool for understanding the mechanism of the transition from laminar to turbulent regime in rotating flow for the scientific community. We present for different Taylor numbers a set of three-dimensional numerical investigations of the stability and transition from Couette flow to Taylor vortex regime of a viscous incompressible fluid (liquid sodium) between two concentric cylinders with the inner one rotating and the outer one at rest. We seek the onset of the first instability and we compare the obtained results for different velocity rates. We calculate the corresponding Taylor number in order to show its effect on flow patterns and pressure field.

Handheld Laser Scanner Research

2019 ◽  
Vol 952 (10) ◽  
pp. 47-54
Author(s):  
A.V. Komissarov ◽  
A.V. Remizov ◽  
M.M. Shlyakhova ◽  
K.K. Yambaev
Keyword(s):  
Point Cloud ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Test Site ◽  
Optical Systems ◽  
Advantages And Disadvantages ◽  
Site Survey ◽  
Laser Scanners ◽  
Three Dimensional Models ◽  
The Stability

The authors consider hand-held laser scanners, as a new photogrammetric tool for obtaining three-dimensional models of objects. The principle of their work and the newest optical systems based on various sensors measuring the depth of space are described in detail. The method of simultaneous navigation and mapping (SLAM) used for combining single scans into point cloud is outlined. The formulated tasks and methods for performing studies of the DotProduct (USA) hand-held laser scanner DPI?8X based on a test site survey are presented. The accuracy requirements for determining the coordinates of polygon points are given. The essence of the performed experimental research of the DPI?8X scanner is described, including scanning of a test object at various scanner distances, shooting a test polygon from various scanner positions and building point cloud, repeatedly shooting the same area of the polygon to check the stability of the scanner. The data on the assessment of accuracy and analysis of research results are given. Fields of applying hand-held laser scanners, their advantages and disadvantages are identified.

scholarly journals Gum Tragacanth (GT): A Versatile Biocompatible Material beyond Borders

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1510 ◽  
Author(s):  
Mohammad Ehsan Taghavizadeh Yazdi ◽  
Simin Nazarnezhad ◽  
Seyed Hadi Mousavi ◽  
Mohammad Sadegh Amiri ◽  
Majid Darroudi ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Food Packaging ◽  
Three Dimensional ◽  
Great Promise ◽  
Anionic Polymer ◽  
Gum Tragacanth ◽  
New Horizons ◽  
Tissue Healing ◽  
The Stability ◽  
Therapeutic Substance

The use of naturally occurring materials in biomedicine has been increasingly attracting the researchers’ interest and, in this regard, gum tragacanth (GT) is recently showing great promise as a therapeutic substance in tissue engineering and regenerative medicine. As a polysaccharide, GT can be easily extracted from the stems and branches of various species of Astragalus. This anionic polymer is known to be a biodegradable, non-allergenic, non-toxic, and non-carcinogenic material. The stability against microbial, heat and acid degradation has made GT an attractive material not only in industrial settings (e.g., food packaging) but also in biomedical approaches (e.g., drug delivery). Over time, GT has been shown to be a useful reagent in the formation and stabilization of metal nanoparticles in the context of green chemistry. With the advent of tissue engineering, GT has also been utilized for the fabrication of three-dimensional (3D) scaffolds applied for both hard and soft tissue healing strategies. However, more research is needed for defining GT applicability in the future of biomedical engineering. On this object, the present review aims to provide a state-of-the-art overview of GT in biomedicine and tries to open new horizons in the field based on its inherent characteristics.

scholarly journals Emergent chiral symmetry in a three-dimensional interacting Dirac liquid

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
András L. Szabó ◽  
Bitan Roy
Keyword(s):  
Fixed Points ◽  
Chiral Symmetry ◽  
Rotational Symmetry ◽  
Three Dimensional ◽  
Spatial Dimension ◽  
Dirac Fermions ◽  
Electronic Interactions ◽  
Emergent Phenomena ◽  
Ordered Phases ◽  
The Stability

Abstract We compute the effects of strong Hubbardlike local electronic interactions on three-dimensional four-component massless Dirac fermions, which in a noninteracting system possess a microscopic global U(1) ⊗ SU(2) chiral symmetry. A concrete lattice realization of such chiral Dirac excitations is presented, and the role of electron-electron interactions is studied by performing a field theoretic renormalization group (RG) analysis, controlled by a small parameter ϵ with ϵ = d−1, about the lower-critical one spatial dimension. Besides the noninteracting Gaussian fixed point, the system supports four quantum critical and four bicritical points at nonvanishing interaction couplings ∼ ϵ. Even though the chiral symmetry is absent in the interacting model, it gets restored (either partially or fully) at various RG fixed points as emergent phenomena. A representative cut of the global phase diagram displays a confluence of scalar and pseudoscalar excitonic and superconducting (such as the s-wave and p-wave) mass ordered phases, manifesting restoration of (a) chiral U(1) symmetry between two excitonic masses for repulsive interactions and (b) pseudospin SU(2) symmetry between scalar or pseudoscalar excitonic and superconducting masses for attractive interactions. Finally, we perturbatively study the effects of weak rotational symmetry breaking on the stability of various RG fixed points.

Macromolecular Structure Visualization Tools at NCMI

2000 ◽  
Vol 6 (S2) ◽  
pp. 282-283
Author(s):  
Matthew Dougherty ◽  
Wah Chiu
Keyword(s):  
Human Factors ◽  
3D Visualization ◽  
Three Dimensional ◽  
Theoretical Models ◽  
Biological Research ◽  
Macromolecular Structure ◽  
X Ray ◽  
Visualization Tools ◽  
Types Of Information ◽  
3D Em

Sophisticated tools are needed to examine the results of cyro-microscopy. As the size and resolution of three dimensional macromolecular structures steadily improve, and the speed at with which they can be generated increases, researchers are finding they are inundated with larger datasets and at the same time are compelled to expediently evaluate these structures in unforeseen ways. Integration of EM data with other types of information is becoming necessary and routine; for example X-ray data, 3D EM reconstructions, and theoretical models, must be evaluated in concert to discount or propose hypothesis. To create such tools, the developer must take into account not only the empirical and theoretical possibilities, but also they must master the human factors and computational limits. During the last five years, the National Center for Macromolecular Imaging (NCMI) has progressed from a remedial 3D visualization capability to a collection of visualization tools allowing researchers to focus on the discovery phase of biological research.

Sign in / Sign up

Export Citation Format

Share Document