scholarly journals On the origin of the circular hydraulic jump in a thin liquid film

2018 ◽  
Vol 851 ◽  
Author(s):  
Rajesh K. Bhagat ◽  
N. K. Jha ◽  
P. F. Linden ◽  
D. Ian Wilson

This study explores the formation of circular thin-film hydraulic jumps caused by the normal impact of a jet on an infinite planar surface. For more than a century, it has been believed that all hydraulic jumps are created due to gravity. However, we show that these thin-film hydraulic jumps result from energy loss due to surface tension and viscous forces alone. We show that, at the jump, surface tension and viscous forces balance the momentum in the liquid film and gravity plays no significant role. Experiments show no dependence on the orientation of the surface and a scaling relation balancing viscous forces and surface tension collapses the experimental data. A theoretical analysis shows that the downstream transport of surface energy is the previously neglected critical ingredient in these flows, and that capillary waves play the role of gravity waves in a traditional jump in demarcating the transition from the supercritical to subcritical flow associated with these jumps.

Author(s):  
B. Kakimpa ◽  
H. P. Morvan ◽  
S. Hibberd

This paper explores the role of surface tension, grid resolution, inertia term representation and temporal discretisation scheme in the numerical simulation of shear-driven thin-film rimming flows. An ideal film formulation and solution strategy, suitable for the simulation of smooth, shock and pool solutions is presented. Shock and pool solution stability is shown to be dependent on the provision of sufficient grid refinement to resolve key flow features present in the solution such as steep fronts and small wavelength capillary waves. A minimum grid refinement criterion is proposed based on the findings from a parametric study. A previously established dependence of solution stability on surface tension is shown to be linked to the sensitivity of the wavelengths of disturbances in the capillary zone on the surface tension coefficient. Solution strategies utilising un-physically high surface tension values to guarantee stability, are explored and shown to enhance stability by modifying the solution in the capillary zone to one that is resolvable on the available grid. The role of inertia in solution stability is also investigated and simplified inertia representations are shown to primarily affect accuracy but not stability.


2000 ◽  
Vol 77 (11) ◽  
pp. 847-862 ◽  
Author(s):  
MRA Shegelski ◽  
M Reid ◽  
R Niebergall

We consider the motion of a cylinder with the same mass and sizeas a curling rock, but with a very different contact geometry.Whereas the contact area of a curling rock is a thin annulus havinga radius of 6.25 cm and width of about 4 mm, the contact area of the cylinderinvestigated takes the form of several linear segments regularly spacedaround the outer edge of the cylinder, directed radially outward from the center,with length 2 cm and width 4 mm. We consider the motion of this cylinderas it rotates and slides over ice having the nature of the ice surfaceused in the sport of curling. We have previously presented a physicalmodel that accounts for the motion of curling rocks; we extend this modelto explain the motion of the cylinder under investigation. In particular,we focus on slow rotation, i.e., the rotational speed of the contact areasof the cylinder about the center of mass is small compared to thetranslational speed of the center of mass.The principal features of the model are (i) that the kineticfriction induces melting of the ice, with the consequence that thereexists a thin film of liquid water lying between the contact areasof the cylinder and the ice; (ii) that the radial segmentsdrag some of the thin liquid film around the cylinder as it rotates,with the consequence that the relative velocity between the cylinderand the thin liquid film is significantly different than the relativevelocity between the cylinder and the underlying solid ice surface.Since it is the former relative velocity that dictates the nature of themotion of the cylinder, our model predicts, and observations confirm, thatsuch a slowly rotating cylinder stops rotating well before translationalmotion ceases. This is in sharp contrast to the usual case of most slowlyrotating cylinders, where both rotational and translational motion ceaseat the same instant. We have verified this prediction of our model bycareful comparison to the actual motion of a cylinder having a contactarea as described.PACS Nos.: 46.00, 01.80+b


1988 ◽  
Vol 55 (4) ◽  
pp. 975-980 ◽  
Author(s):  
H. Koguchi ◽  
M. Okada ◽  
K. Tamura

This paper reports on the instability for the meniscus of a thin film of a very viscous liquid between two tilted plates, which are separated at a constant speed with a tilt angle in the normal direction of the plates. The disturbances on the meniscus moving with movement of the plates are examined experimentally and theoretically. The disturbances are started when the velocity of movement of the plates exceeds a critical one. The wavelength of the disturbances is measured by using a VTR. The instability of the meniscus is studied theoretically using the linearized perturbation method. A simple and complete analytical solution yields both a stability criterion and the wave number for a linear thickness geometry. These results compared with experiments for the instability show the validity of the stability criterion and the best agreement is obtained with the wave number of maximum amplification.


2011 ◽  
Vol 17 (5-7) ◽  
pp. 983-990 ◽  
Author(s):  
Hiroshige Matsuoka ◽  
Koji Oka ◽  
Yusuke Yamashita ◽  
Fumihiro Saeki ◽  
Shigehisa Fukui

2017 ◽  
Vol 829 ◽  
pp. 304-327 ◽  
Author(s):  
Raj Dandekar ◽  
Anurag Pant ◽  
Baburaj A. Puthenveettil

We study the spreading of a film from ethanol–water droplets of radii $0.9~\text{mm}<r_{d}<1.1~\text{mm}$ on the surface of a deep water layer for various concentrations of ethanol in the drop. Since the drop is lighter ($\unicode[STIX]{x1D709}=\unicode[STIX]{x1D70C}_{l}/\unicode[STIX]{x1D70C}_{d}>1.03$), it stays at the surface of the water layer during the spreading of the film from the drop; the film is more viscous than the underlying water layer since $\unicode[STIX]{x1D712}=\unicode[STIX]{x1D707}_{l}/\unicode[STIX]{x1D707}_{d}>0.38$. Inertial forces are not dominant in the spreading since the Reynolds numbers based on the film thickness $h_{f}$ are in the range $0.02<Re_{f}<1.4$. The spreading is surface-tension-driven since the film capillary numbers are in the range $0.0005<Ca_{f}<0.0069$ and the drop Bond numbers are in the range $0.19<Bo_{d}<0.56$. We observe that, when the drop is brought in contact with the water surface, capillary waves propagate from the point of contact, followed by a radially expanding, thin circular film of ethanol–water mixture. The film develops instabilities at some radius to form outward-moving fingers at its periphery while it is still expanding, till the expansion stops at a larger radius. The film then retracts, during which time the remaining major part of the drop, which stays at the centre of the expanding film, thins and develops holes and eventually mixes completely with water. The radius of the expanding front of the film scales as $r_{f}\sim t^{1/4}$ and shows a dependence on the concentration of ethanol in the drop as well as on $r_{d}$, and is independent of the layer height $h_{l}$. Using a balance of surface tension and viscous forces within the film, along with a model for the fraction of the drop that forms the thin film, we obtain an expression for the dimensionless film radius $r_{f}^{\ast }=r_{f}/r_{d}$, in the form $fr_{f}^{\ast }={t_{\unicode[STIX]{x1D707}d}^{\ast }}^{1/4}$, where $t_{\unicode[STIX]{x1D707}d}^{\ast }=t/t_{\unicode[STIX]{x1D707}d}$, with the time scale $t_{\unicode[STIX]{x1D707}d}=\unicode[STIX]{x1D707}_{d}r_{d}/\unicode[STIX]{x0394}\unicode[STIX]{x1D70E}$ and $f$ is a function of $Bo_{d}$. Similarly, we show that the dimensionless velocity of film spreading, $Ca_{d}=u_{f}\unicode[STIX]{x1D707}_{d}/\unicode[STIX]{x0394}\unicode[STIX]{x1D70E}$, scales as $4f^{4}Ca_{d}={r_{f}^{\ast }}^{-3}$.


Author(s):  
S. B. Liang ◽  
G. P. Xu

Self-sustainable motions of the slug flow in oscillating heat pipes have been investigated in the paper. Thin film condensation in the capillary channels of the condenser of the oscillating heat pipes was studied. Instability of the thin liquid film on the characteristics of heat pipes was analysed. The extra thermal resistance caused by the thickness of the thin liquid film was taken into account for the numerical simulation of the oscillatory motions of the slug flow in the heat pipes. Saturated temperatures and pressures of the working fluid in the condenser were obtained. Thermoacoustic theory was applied to calculate heat transport through the adiabatic section of the heat pipes. Experimental studies were carried out to understand the heat transfer behaviours of heat pipes. One heat pipe with the working fluid of HFC-134a was evaluated. The heat pipe is made of aluminium plate and has the width of 50 mm and thickness of 1.9 mm. Numerical and experimental results relevant to the heat transport capability of the heat pipe were analysed and compared.


Soft Matter ◽  
2016 ◽  
Vol 12 (44) ◽  
pp. 9105-9114 ◽  
Author(s):  
Xurui Zhang ◽  
Plamen Tchoukov ◽  
Rogerio Manica ◽  
Louxiang Wang ◽  
Qingxia Liu ◽  
...  

2021 ◽  
Vol 143 (4) ◽  
Author(s):  
Kuldeep Singh ◽  
Medhat Sharabi ◽  
Richard Jefferson-Loveday ◽  
Stephen Ambrose ◽  
Carol Eastwick ◽  
...  

Abstract In the case of aero-engine, thin lubricating film servers dual purpose of lubrication and cooling. Prediction of dry patches or lubricant starved region in bearing or bearing chambers are required for safe operation of these components. In this work, thin liquid film flow is numerically investigated using the framework of the Eulerian thin film model (ETFM) for conditions, which exhibit partial wetting phenomenon. This model includes a parameter that requires adjustment to account for the dynamic contact angle. Two different experimental data sets have been used for comparisons against simulations, which cover a wide range of operating conditions including varying the flowrate, inclination angle, contact angle, and liquid–gas surface tension coefficient. A new expression for the model parameter has been proposed and calibrated based on the simulated cases. This is employed to predict film thickness on a bearing chamber which is subjected to a complex multiphase flow. From this study, it is observed that the proposed approach shows good quantitative comparisons of the film thickness of flow down an inclined plate and for the representative bearing chamber. A comparison of model predictions with and without wetting and drying capabilities is also presented on the bearing chamber for shaft speed in the range of 2500 RPM to 10,000 RPM and flowrate in the range of 0.5 liter per minute (LPM) to 2.5 LPM.


Materials ◽  
2005 ◽  
Author(s):  
W. Song

This paper presents a method of producing charged droplets using standing capillary waves in a thin liquid film on a vibrating surface. Capillary waves with wavelengths on the order of microns are set to reach a critical stable condition and an electric field is applied to extract charged droplets from the crest of unstable waves. This method is more efficient than the method based on stable Taylor cones working in the cone-jet mode in producing a large quantity of uniformly charged droplets. Theoretical analyses on the droplet diameter, charge-to-mass ratio and the total current emitted from capillary waves are also presented.


2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Elaine Lim ◽  
Tze Cheng Kueh ◽  
Yew Mun Hung

Purpose The present study aims to investigate the inverse-thermocapillary effect in an evaporating thin liquid film of self-rewetting fluid, which is a dilute aqueous solution (DAS) of long-chain alcohol. Design/methodology/approach A long-wave evolution model modified for self-rewetting fluids is used to study the inverse thermocapillary characteristics of an evaporating thin liquid film. The flow attributed to the inverse thermocapillary action is manifested through the streamline plots and the evaporative heat transfer characteristics are quantified and analyzed. Findings The thermocapillary flow induced by the negative surface tension gradient drives the liquid from a low-surface-tension (high temperature) region to a high-surface-tension (low temperature) region, retarding the liquid circulation and the evaporation strength. The positive surface tension gradients of self-rewetting fluids induce inverse-thermocapillary flow. The results of different working fluids, namely, water, heptanol and DAS of heptanol, are examined and compared. The thermocapillary characteristic of a working fluid is significantly affected by the sign of the surface tension gradient and the inverse effect is profound at a high excess temperature. The inverse thermocapillary effect significantly enhances evaporation rates. Originality/value The current investigation on the inverse thermocapillary effect in a self-rewetting evaporating thin film liquid has not been attempted previously. This study provides insights on the hydrodynamic and thermal characteristics of thermocapillary evaporation of self-rewetting liquid, which give rise to significant thermal enhancement of the microscale phase-change heat transfer devices.


Sign in / Sign up

Export Citation Format

Share Document