The effect of tidal force and topography on horizontal convection

2021 ◽  
Vol 932 ◽  
Author(s):  
Guang-Yu Ding ◽  
Yu-Hao He ◽  
Ke-Qing Xia

We present a numerical study on how tidal force and topography influence flow dynamics, transport and mixing in horizontal convection. Our results show that local energy dissipation near topography will be enhanced when the tide is sufficiently strong. Such enhancement is related to the height of the topography and increases as the tidal frequency $\omega$ decreases. The global dissipation is found to be less sensitive to the changes in $\omega$ when the latter becomes small and asymptotically approaches a constant value. We interpret the behaviour of the dissipation as a result of the competition among the dominant forces in the system. According to which mechanism prevails, the flow state of the system can be divided into three regimes, which are the buoyancy-, tide- and drag-control regimes. We show that the mixing efficiency $\eta$ for different tidal energy and topography height can be well described by a universal function $\eta \approx \eta _{HC}/(1+\mathcal {R})$ , where $\eta _{HC}$ is the mixing efficiency in the absence of tide and $\mathcal {R}$ is the ratio between tidal and available potential energy inputs. With this, one can also determine the dominant mechanism at a certain ocean region. We further derive a power law relationship connecting the mixing coefficient and the tidal Reynolds number.

2021 ◽  
Vol 11 (8) ◽  
pp. 3404
Author(s):  
Majid Hejazian ◽  
Eugeniu Balaur ◽  
Brian Abbey

Microfluidic devices which integrate both rapid mixing and liquid jetting for sample delivery are an emerging solution for studying molecular dynamics via X-ray diffraction. Here we use finite element modelling to investigate the efficiency and time-resolution achievable using microfluidic mixers within the parameter range required for producing stable liquid jets. Three-dimensional simulations, validated by experimental data, are used to determine the velocity and concentration distribution within these devices. The results show that by adopting a serpentine geometry, it is possible to induce chaotic mixing, which effectively reduces the time required to achieve a homogeneous mixture for sample delivery. Further, we investigate the effect of flow rate and the mixer microchannel size on the mixing efficiency and minimum time required for complete mixing of the two solutions whilst maintaining a stable jet. In general, we find that the smaller the cross-sectional area of the mixer microchannel, the shorter the time needed to achieve homogeneous mixing for a given flow rate. The results of these simulations will form the basis for optimised designs enabling the study of molecular dynamics occurring on millisecond timescales using integrated mix-and-inject microfluidic devices.


Author(s):  
S. A. Kazemi ◽  
M. Passandideh-Fard ◽  
J. Esmaeelpanah

In this paper, a numerical study of two new designs of passive micro-mixers based on chaotic advection is presented. The advection phenomenon in a T-shaped micro-mixer is enhanced using a segmented gas-liquid flow; and a peripheral/axial mixing mechanism. The simulations are performed for two non-reactive miscible gases: oxygen and methanol. The numerical model employed for this study is based on the solution of the physical governing equations namely the continuity, momentum, species transport and an equation to track the free surface development. The equations are discretized using a control volume numerical technique. The distribution of the species concentration within the domain is calculated based on which a mixing intensity factor is introduced. This factor is then used as a criterion for the mixing length. In the first micro-mixer design with a drop injection mechanism for a typical condition, the mixing length is reduced by nearly 15%. Compared to that of a simple T-shaped micro-mixer with the same flow rates, the two gases interface area is increased in axisymmetric micro-mixer leading to an increase of the mixing efficiency and a reduction of the mixing length. Also, the effects of the baffles height and span on the mixing efficiency and length in axisymmetric micro-mixer are studied. Having baffles in the channel can substantially decrease the mixing length.


2021 ◽  
pp. 2150049
Author(s):  
SIYUE XIONG ◽  
XUEYE CHEN

In this paper, we mainly study the mixing performance of the micromixer with quartic Koch curve fractal (MQKCF) by numerical simulation. Changing the structure of the microchannel based on the fractal principle can significantly improve the fluid flow state in the microchannel and improve the mixing efficiency of the micromixer. This paper discussed the effects of different fractal deflection angles, microchannel heights and different fractal times on the mixing efficiency under four different Reynolds numbers (Re). It is found that changing the deflection angle of the fractal can bring extremely high benefits, which makes the fluid deflect and fold in the microchannel, enhancing the chaotic convection in the microchannel, and improve the mixing efficiency of the fluid. Under the reasonable arrangement of the quartic Koch curve fractal principle, it can give the micro-mixture more than 99% mixing efficiency. Based on the excellent mixing performance of MQKCF, it also has extremely high application value in the biochemical neighborhood.


2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Irina Stanciu

The geometric layout is the key factor for enhancing the efficiency of the fluid mixing in passive micromixers. Therefore, by adjusting the geometric design and by controlling the geometric parameters, one can enhance the mixing process. However, through any fabrication process, the geometric parameters present slight, inherent variation from the designed values than might affect the performance of the micromixer. This paper proposes a numerical study on the influence of the unavoidable geometric tolerances on the mixing efficiency in passive micromixers. A probabilistic simulation model, based on the Monte Carlo method, is developed and implemented for this purpose. An uncertainty simulation model shows that significant deviations from the deterministic design can appear due to small variations in the geometric parameters values and demonstrates how a more realistic mixing performance can be estimated.


1985 ◽  
Vol 42 (5) ◽  
pp. 999-1006 ◽  
Author(s):  
M. Gosselin ◽  
L. Legendre ◽  
S. Demers ◽  
R. G. Ingram

Variations of sea-ice microalgae at the ice–water interface (Manitounuk Sound, Hudson Bay, Canada) were studied in relation to various energy inputs (light, tidal mixing, and heat) in April and May 1982. Seasonal photosynthetic activity does not start before the light intensity reaches 7.6 μEinst∙m−2∙s−1. Above this value, the seasonal increase in cell numbers and chlorophyll and in the photoadaptation index (Ik) is related to the increase in underice light intensity. The sea-ice community changes from shade to light adaptation to optimize the use of ambient light energy. Photosynthetic efficiency (αB) is mainly controlled by the fortnightly tidal vertical mixing, which governs the amount of phosphate (or of another nutrient factor) in the upper brackish layer. The ice microflora, which grows at a stable interface, takes advantage of nutrient replenishment during mixed water column conditions. We conclude that production of microalgae depends upon three forms of energy: (1) the flux of solar light, (2) the inputs of auxiliary mechanical energy (here, the fortnightly tides), and (3) the energy exchanges (here, the heat flux) responsible for the maintenance or destruction of energetic interfaces (ergoclines).


Author(s):  
Xiaoxu Du ◽  
Lianying Zhang

The hydrodynamic performance of the blended-wing-body underwater glider can be improved by opening a hole on the surface and applying the steady suction active flow control. In order to explore the influence law and mechanism of the steady suction active flow control on the lift and drag performance of the hydrofoil, which is the profile of the blended-wing-body underwater glider, based on the computational fluid dynamics (CFD) method and SST k-ω turbulence model, the steady suction active flow control of hydrofoil under different conditions is studied, which include three suction factors: suction angle, suction position and suction ratio, as well as three different flow states: no stall, critical stall and over stall. Then the influence mechanism in over stall flow state is further analyzed. The results show that the flow separation state of NACA0015 hydrofoil can be effectively restrained and the flow field distribution around it can be improved by a reasonable steady suction, so as to the lift-drag performance of NACA0015 hydrofoil is improved. The effect of increasing lift and reducing drag of steady suction is best at 90° suction angle and symmetrical about 90° suction angle, and it is better when the steady suction position is closer to the leading edge of the hydrofoil. In addition, with the increase of the suction ratio, the influence of steady suction on the lift coefficient and drag coefficient of hydrofoil is greater.


2015 ◽  
Vol 27 (6) ◽  
pp. 067103
Author(s):  
Tetsuro Tsuji ◽  
Yudai Katto ◽  
Satoyuki Kawano

2018 ◽  
Vol 32 (27) ◽  
pp. 1850301 ◽  
Author(s):  
Jiajia Xu ◽  
Xueye Chen ◽  
Yanlin Liu ◽  
Zhen Yao

In this paper, we have designed a rhombic microchannel plane micromixer (RMPM). The RMPM uses the principle of converging and diverging to improve the mixing efficiency. We improved the mixing efficiency by changing the rhombic angles and the rhombic channel width ratios. The influence of geometric parameters on mixing efficiency is analyzed by control of the variable method. Through the analysis of the numerical simulation, the RMPM can help increase the chaotic convection between different concentrations of fluids. The results of the study show that the rhombic angle and the width ratio of a microchannel can have a considerable effect on the mixing efficiency. The micromixer can be potentially useful in the future applications of rapid and high throughput mixing.


Sign in / Sign up

Export Citation Format

Share Document