Convection in a saturated porous medium at large Rayleigh number or Peclet number

1963 ◽  
Vol 15 (4) ◽  
pp. 527-544 ◽  
Author(s):  
R. A. Wooding

When the dimensions of a convective system in a saturated porous medium are sufficiently great, diffusion effects can be neglected except in regions where the gradients of fluid properties are very large. A boundary-layer theory is developed for vertical plane flows in such regions. In special cases, the theory is equivalent to that for laminar incompressible flow in a two-dimensional half-jet, or in a plane jet or round jet, for which similarity solutions are well known.A number of experiments have been performed using a Hele-Shaw cell immersed in water, with a source of potassium permanganate solution located between the plates. At very small values of the source strength, a flow analogous to that of a plane jet from a slit is obtained. The distance advanced by the jet front, or cap, is measured as a function of time, and the velocity is found to be nearly proportional to the velocity of the fluid on the axis of the steady jet behind the cap, as given by the similarity law of Schlichting and Bickley. At large values of the source strength, a two-dimensional ‘broad jet’ of homogeneous solution descending under gravity is produced; the shape of the flow region can be calculated with little error from potential theory, neglecting the effect of the mixing layers.A possible example of a mixing layer observed in a geothermal region is examined. The theoretical form of the temperature distribution is calculated numerically, taking into account the large viscosity variation with temperature and also the possibility of a large permeability variation. These effects are found to have less influence upon the solution than might have been expected. Quantitative values obtained for the physical parameters are consistent with other geophysical observations.

Author(s):  
Mohamed R. Eid ◽  
O.D. Makinde

Abstract The combined impact of solar radiation, chemical reaction, Joule heating, viscous dissipation and magnetic field on flow of an electrically conducting nanofluid over a convectively heated stretching sheet embedded in a saturated porous medium is simulated. By using appropriate similarity transformation, the governing nonlinear equations are converted into ODEs and numerical shooting technique with (RK45) method is employed to tackle the problem. The effects of various thermo-physical parameters on the entire flow structure with heat and mass transfer are presented graphically and discussed quantitatively. Special cases of our results are benchmarked with some of those obtained earlier in the literature and are found to be in excellent agreement. It is found that both the temperature and surface concentration gradients are increasing functions of the non-Darcy porous medium parameter. One describing result is the incident solar radiation absorption and its transmission into the working nanofluid by convection.


2018 ◽  
Vol 29 (10) ◽  
pp. 1850097 ◽  
Author(s):  
Abderrahmane Baïri ◽  
Najib Laraqi

This three-dimensional (3D) numerical work based on the volume control method quantifies the convective heat transfer occurring in a hemispherical cavity filled with a ZnO–H2O nanofluid saturated porous medium. Its main objective is to improve the cooling of an electronic component contained in this enclosure. The volume fraction of the considered monophasic nanofluid varies between 0% (pure water) and 10%, while the cupola is maintained isothermal at cold temperature. During operation, the active device generates a heat flux leading to high Rayleigh number reaching [Formula: see text] and may be inclined with respect to the horizontal plane at an angle ranging from 0[Formula: see text] to 180[Formula: see text] (horizontal position with cupola facing upwards and downwards, respectively) by steps of 15[Formula: see text]. The natural convective heat transfer represented by the average Nusselt number has been quantified for many configurations obtained by combining the tilt angle, the Rayleigh number, the nanofluid volume fraction and the ratio between the thermal conductivity of the porous medium’s solid matrix and that of the base fluid. This ratio has a significant influence on the free convective heat transfer and ranges from 0 (without porous media) to 70 in this work. The influence of the four physical parameters is analyzed and commented. An empirical correlation between the Nusselt number and these parameters is proposed, allowing determination of the average natural convective heat transfer occurring in the hemispherical cavity.


2009 ◽  
Vol 283-286 ◽  
pp. 364-369 ◽  
Author(s):  
M.R. Arab ◽  
Bernard Pateyron ◽  
Mohammed El Ganaoui ◽  
Nicolas Calvé

For simulating flows in a porous medium, a numerical tool based on the Lattice Boltzmann Method (LBM) is developed with regards to the classical D2Q9 model. A short description of this model is presented. This technique, applied to two-dimensional configurations, indicates its ability to simulate phenomena of heat and mass transfer. The numerical study is extended to estimate physical parameters that characterize porous materials, like the so-called Effective Thermal Conductivity (ETC) which is of our interest in this paper. Obtained results are compared with those which could be found analytically and by theoretical models. Finally, a porous medium is considered to find its ETC.


2007 ◽  
Vol 129 (10) ◽  
pp. 1459-1463 ◽  
Author(s):  
D. A. Nield

A critical review is made of recent studies of the modeling of viscous dissipation in a saturated porous medium, with applications to either forced convection or natural convection. Alternative forms of the viscous dissipation function are discussed. Limitations to the concept of fully developed convection are noted. Special attention is focused on the roles of viscous dissipation and work done by pressure forces (flow work) in natural convection in a two-dimensional box with either lateral or bottom heating.


2021 ◽  
Vol 104 (3) ◽  
pp. 003685042110422
Author(s):  
Ahmed M. Sedki ◽  
S. M. Abo-Dahab ◽  
J. Bouslimi ◽  
K. H. Mahmoud

Here, we study the effect of mixed convection and thermal radiation on unsteady boundary layer of heat transfer and nanofluid flow over permeable moving surface through a porous medium. The effect of heat generation is also discussed. The equations governing the system are the continuity equation, momentum equation and the heat transfer equation. These governing equations transformed into a system of nondimensional equations contain many physical parameters that describe the study. The transformed equations are solved numerically using an implicit finite difference technique with Newton's linearization method. The thermo-physical parameters describe the study are the mixed convection parameter α, [Formula: see text], the Radiation parameter Rd, [Formula: see text] , porous medium parameter k, [Formula: see text], the nanoparticles volume [Formula: see text],[Formula: see text], the suction or injection parameter fw, [Formula: see text], the unsteadiness parameter At, [Formula: see text] and the heat source parameter λ  =  0.5 .The influence of the thermo-physical parameters is obtained analytically and displayed graphically. Comparisons of some special cases of the present study are performed with previously published studies and a good agreement is obtained.


2007 ◽  
Vol 129 (12) ◽  
pp. 1714-1718 ◽  
Author(s):  
D. A. Nield ◽  
A. V. Kuznetsov

An analytical study is made of the onset of convection in a saturated porous medium occupying a two-dimensional enclosure of uniform height, but whose width is slowly varying in an arbitrary manner, or one of uniform width, but whose height is slowly varying in an arbitrary manner. It is found that the variation of width generally has a stabilizing effect, whereas variation of height generally has a destabilizing effect.


1995 ◽  
Vol 292 ◽  
pp. 305-323 ◽  
Author(s):  
M. De La Torre Juárez ◽  
F. H. Busse

The range of existence and the stability of spatially periodic solutions has been studied for steady and oscillatory two-dimensional convection in a fluid-saturated porous medium. We have analysed the limit where viscous effects are dominant and Darcy's law can be applied. A Galerkin method has been used to obtain the steady and the centrosymmetric oscillatory solutions that appear in nonlinear convection at Rayleigh numbers up to 20 times the critical value. Their stability boundaries to arbitrary infinitesimal perturbations have been obtained. Above a given Rayleigh number stable oscillatory solutions are possible at wavenumbers close to the critical values. The stability of this oscillatory state with respect to infinitesimal perturbations of any wavenumber has also been studied. The resulting temporal dynamics in the different unstable regimes is briefly discussed. We show the existence of 3:1 spatial resonances of the steady roll solutions and the existence of stable centrosymmetric and non-centrosymmetric oscillatory solutions.


1987 ◽  
Vol 109 (1) ◽  
pp. 125-130 ◽  
Author(s):  
A. Nakayama ◽  
H. Koyama

The problem of free convective heat transfer from a nonisothermal two-dimensional or axisymmetric body of arbitrary geometric configuration in a fliud-saturated porous medium was analyzed on the basis of boundary layer approximations. Upon introducing a similarity variable (which also accounts for a possible wall temperature effect on the boundary layer length scale), the governing equations for a nonisothermal body of arbitrary shape can be reduced to an ordinary differential equation which has been previously solved by Cheng and Minkowycz for a vertical flat plate with its wall temperature varying in an exponential manner. Thus, it is found that any two-dimensional or axisymmetric body possesses a corresponding class of surface wall temperature distributions which permit similarity solutions. Furthermore, a more straightforward and yet sufficiently accurate approximate method based on the Ka´rma´n-Pohlhausen integral relation is suggested for a general solution procedure for a Darcian fluid flow over a nonisothermal body of arbitrary shape. For illustrative purposes, computations were carried out on a vertical flat plate, horizontal ellipses, and ellipsoids with different minor-to-major axis ratios.


2011 ◽  
Vol 90 (2) ◽  
pp. 605-625 ◽  
Author(s):  
B. S. Bhadauria ◽  
Shilpi Agarwal ◽  
Anoj Kumar

Author(s):  
Nassima Mami ◽  
Mohamed Najib Bouaziz

The steady, laminar, mixed convection, boundary layer flow of an incompressible nanofluid past over a semi-infinite stretching surface in a nanofluid –saturated porous medium with the effects of magnetic field and chemical reaction is studied. The governing boundary layer equations (obtained with the Boussinesq approximation) are transformed into a system of nonlinear ordinary differential equations by using similarity transformation. The effects of various physical parameters are analyzed and discussed in graphical and tabular form. Comparison with published results is presented and we found an excellent agreement with it. Mainly, it found firstly, that an increase in magnetic parameter M decreases both the local Nusselt number and local Sherwood number. Secondly, a great order of the chemical reaction increases the Nusselt and Sherwood numbers.


Sign in / Sign up

Export Citation Format

Share Document