On driven, dissipative, energy-conserving magnetohydrodynamic equilibria

1992 ◽  
Vol 48 (2) ◽  
pp. 177-207 ◽  
Author(s):  
Michael L. Goodman†

A cylindrically symmetric, electrically driven, dissipative, energy-conserving magnetohydrodynamic equilibrium model is considered. The high-magnetic-field Braginskii electron electrical resistivity η parallel to a constant axial magnetic field B and ion thermal conductivity ĸ perpendicular to B are included in an energy equation and in Ohm's law. The expressions for η and ĸ depend on number density and temperature, which are functions of radius that are obtained as part of the equilibrium solution. The model has plasma-confining solutions, by which are meant solutions characterized by the separation of the plasma into two regions separated by a relatively thin transition region that is an internal boundary layer across which temperature and current density vary rapidly. The inner region has a temperature, pressure and current density that are much larger than in the outer region. The number density and thermal conductivity attain their minimum values in the transition region. The model has an intrinsic value of β, about 6.6%, which must be exceeded in order that a plasma-confining solution exist. The model has an intrinsic length scale, which, for plasma-confining solutions, is a measure of the thickness of the transition region separating the inner and outer regions of plasma. A larger class of transport coefficients is modelled by artificially changing η and ĸ by changing the constant coefficients ηO and ĸO that occur in their expressions. Increasing ĸO transforms a state that does not exhibit confinement into one that does, improves the confinement in a state that already exhibits it, and leads to an increase in ĸ in the confined region of plasma. The improvement in confinement consists in a decrease in the thickness of the transition region. Decreasing ηO subject to certain constraints, also transforms a state that does not exhibit confinement into one that does, improves the confinement in a state that already exhibits it, and leads to a decrease in η in the confined region of plasma. Increasing ηO up to a critical point increases the current, temperature, and volume of the confined region of plasma, and causes the thickness of the transition region to increase. If ηO is increased beyond the critical point, a plasma-confining state cannot exist. In all cases it is found that an increase in ĸ and a decrease in η in the confined region of plasma are associated with an improvement in the confinement properties of the equilibrium state. If the pressure and temperature are given on the cylinder wall, the equilibrium bifurcates when the electric field decreases below a critical value. The equilibrium can bifurcate into a state that exhibits confinement and a state that does not.

1993 ◽  
Vol 49 (1) ◽  
pp. 125-159 ◽  
Author(s):  
Michael L. Goodman

A cylindrically symmetric, electrically driven, dissipative, energy-conserving magnetohydrodynamic equilibrium model is considered. The high-magneticfield Braginskii ion thermal conductivity perpendicular to the local magnetic field and the complete electron resistivity tensor are included in an energy equation and in Ohm's law. The expressions for the resistivity tensor and thermal conductivity depend on number density, temperature, and the poloidal and axial (z-component) magnetic field, which are functions of radius that are obtained as part of the equilibrium solution. The model has plasma-confining solutions, by which is meant solutions characterized by the separation of the plasma into two concentric regions separated by a transition region that is an internal boundary layer. The inner region is the region of confined plasma, and the outer region is the region of unconfined plasma. The inner region has average values of temperature, pressure, and axial and poloidal current densities that are orders of magnitude larger than in the outer region. The temperature, axial current density and pressure gradient vary rapidly by orders of magnitude in the transition region. The number density, thermal conductivity and Dreicer electric field have a global minimum in the transition region, while the Hall resistivity, Alfvén speed, normalized charge separation, Debye length, (ωλ)ion and the radial electric field have global maxima in the transition region. As a result of the Hall and electron-pressure-gradient effects, the transition region is an electric dipole layer in which the normalized charge separation is localized and in which the radial electric field can be large. The model has an intrinsic value of β, about 13·3%, which must be exceeded in order that a plasma-confining solution exist. The model has an intrinsic length scale that, for plasma-confining solutions, is a measure of the thickness of the boundary-layer transition region. If appropriate boundary conditions are given at R = 0 then the equilibrium is uniquely determined. If appropriate boundary conditions are given at any outer boundary R = a then the equilibrium exhibits a bifurcation into two states, one of which exhibits plasma confinement and carries a larger axial current than the other, which is almost homogeneous and cannot confine a plasma. Exact expressions for the two values of the axial current in the bifurcation are derived. If the boundary conditions are given at R = a then a solution exists if and only if the constant driving electric field exceeds a critical value. An exact expression for this critical electric field is derived. It is conjectured that the bifurcation is associated with an electric-field-driven transition in a real plasma, between states with different rotation rates, energy dissipation rates and confinement properties. Such a transition may serve as a relatively simple example of the L—H mode transition observed in tokamaks.


2021 ◽  
Vol 87 (2) ◽  
Author(s):  
Todd Elder ◽  
Allen H. Boozer

The prominence of nulls in reconnection theory is due to the expected singular current density and the indeterminacy of field lines at a magnetic null. Electron inertia changes the implications of both features. Magnetic field lines are distinguishable only when their distance of closest approach exceeds a distance $\varDelta _d$ . Electron inertia ensures $\varDelta _d\gtrsim c/\omega _{pe}$ . The lines that lie within a magnetic flux tube of radius $\varDelta _d$ at the place where the field strength $B$ is strongest are fundamentally indistinguishable. If the tube, somewhere along its length, encloses a point where $B=0$ vanishes, then distinguishable lines come no closer to the null than $\approx (a^2c/\omega _{pe})^{1/3}$ , where $a$ is a characteristic spatial scale of the magnetic field. The behaviour of the magnetic field lines in the presence of nulls is studied for a dipole embedded in a spatially constant magnetic field. In addition to the implications of distinguishability, a constraint on the current density at a null is obtained, and the time required for thin current sheets to arise is derived.


Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2013
Author(s):  
Zhong Wu ◽  
Jingyun Chen ◽  
Qifeng Li ◽  
Da-Hai Xia ◽  
Yida Deng ◽  
...  

By modifying the bonding of graphene (GR) and Fe3O4, a stable structure of GR-Fe3O4, namely magnetic GR, was obtained. Under the induction of a magnetic field, it can be orientated in an epoxy resin (EP) matrix, thus preparing EP/GR-Fe3O4 composites. The effects of the content of GR and the degree of orientation on the thermal conductivity of the composites were investigated, and the most suitable Fe3O4 load on GR was obtained. When the mass ratio of GR and Fe3O4 was 2:1, the thermal conductivity could be increased by 54.8% compared with that of pure EP. Meanwhile, EP/GR-Fe3O4 composites had a better thermal stability, dynamic thermomechanical properties, and excellent electrical insulation properties, which can meet the requirements of electronic packaging materials.


2021 ◽  
Author(s):  
Mohd Imran ◽  
Nasser Zouli ◽  
Tansir Ahamad ◽  
Saad M. Alshehri ◽  
Mohammed Rehaan Chandan ◽  
...  

Ferrofluids prepared by dispersing superparamagnetic Fe3O4@C core–shell nanoparticles in water exhibited exceptional enhancement in thermal conductivity without an external magnetic field.


2018 ◽  
Vol 177 ◽  
pp. 08004
Author(s):  
Łukasz Tomków

The model of a single Nuclotron-type cable is presented. The goal of this model is to assess the behaviour of the cable under different loads. Two meshes with different simplifications are applied. In the first case, the superconductor in the cable is modelled as single region. Second mesh considers individual strands of the cable. The significant differences between the distributions of the electric current density obtained with both models are observed. The magnetic field remains roughly similar.


Sign in / Sign up

Export Citation Format

Share Document