Production of the English past tense by children with language comprehension impairments

2005 ◽  
Vol 32 (1) ◽  
pp. 117-137 ◽  
Author(s):  
KATE NATION ◽  
MARGARET J. SNOWLING ◽  
PAULA CLARKE

Three experiments investigated the ability of eight-year old children with poor language comprehension to produce past tense forms of verbs. Twenty children selected as poor comprehenders were compared to 20 age-matched control children. Although the poor comprehenders performed less well than controls on a range of tasks considered to tap verbal-semantic abilities, the two groups showed equivalent phonological skills. Poor comprehenders performed as well as control children when asked to inflect novel verbs and regular verbs. In contrast, poor comprehenders were less skilled than controls at inflecting both high frequency and low frequency irregular verbs. Although the predominant error pattern for all children was to over-regularize, this was most marked in the poor comprehenders; control children were more likely to produce errors that contained knowledge of the irregular form than poor comprehenders. In addition, the ability to inflect irregular verbs was related to individual differences in verbal-semantic skills. These findings are discussed within a framework in which verb inflection is related to underlying language skills in both the phonological and semantic domains.

PEDIATRICS ◽  
1983 ◽  
Vol 72 (1) ◽  
pp. 88-92
Author(s):  
Ugo Carpentieri ◽  
Leigh Smith ◽  
Charles W. Daeschner ◽  
Mary Ellen Haggard

Neutrophils can be distinguished as EA negative (EA-N) or EA positive (EA+N), according to rosette formation with sheep erythrocytes. EA- neutrophils show a bactericidal activity 50% to 70% lower than EA+ neutrophils. Thirty children with sickle cell disease were studied during steady state and crises/infections, together with matched control children. EA+ and EA- neutrophils, zinc levels in the body, and frequency of previous bacterial infection were evaluated. Sixty percent of the patients (18/30) had zinc deficiency (zinc < 8.5 µg/1010 RBC): of this group, more than three fourths (14/18) had a high frequency of infections (≥3/yr) and most of those (11/14) also had an increased percentage of EA- neutrophils (80% to 85% v 35% to 45% in control subjects). Only 4/18 of patients with zinc deficiency had a low frequency of infections, and only one of these four had a higher percentage of EA- neutrophils. In patients with normal zinc levels (12/30 or 40%), only three had frequent infections, but only one of these had an increased percentage of EA- neutrophils. The number of EA+ neutrophils increased after stimulation with epinephrine or during crises/infections. In six patients with more pronounced zinc deficiency and more severe crisis/infection, a delay in the increase of EA+ neutrophils occurred and was corrected by treatment. These findings suggest that a higher percentage of neutrophils with less bactericidal activity in many children with sickle cell disease and zinc deficiency may be a factor in the higher incidence of infections noted in these patients, and zinc might play a role in the formation, release, and activity of neutrophils.


Cephalalgia ◽  
2016 ◽  
Vol 37 (2) ◽  
pp. 104-113 ◽  
Author(s):  
M Torres-Ferrús ◽  
M Quintana ◽  
J Fernandez-Morales ◽  
J Alvarez-Sabin ◽  
P Pozo-Rosich

Introduction According to the IHCD-3β classification, chronic migraine (CM) is headache occurring on 15 or more days/month. Episodic migraine (EM) can be divided into low frequency (LFEM) and high frequency (HFEM) depending on the headache days suffered per month. Methods We performed a clinical comparison of migraine characteristics according to monthly headache days suffered. Patients were divided into three groups: LFEM (1–9 headache days/month), HFEM (10–14 headache days/month) and CM (≥15 headache days/month). Results The analysis included 1109 patients. Previously reported differences between EM and CM were replicated. However, there were three times more clinical differences between LFEM and HFEM than between HFEM and CM (15 vs. 6). A new model that takes 10 headache days as a cut-off value for CM would have a minimally higher predictive capacity (72.8%) and no statistical differences (71.8%) when comparing it to the current classification. Conclusions HFEM patients have few clinical differences compared with CM patients. This includes the poor outcomes regarding headache-related disability and impact on daily life. According to these findings, neurologists and headache specialists should consider that the emotional and functional impact in HFEM patients could be as disabling as in those with CM.


2021 ◽  
Vol 6 (2) ◽  
pp. 190
Author(s):  
Farisani Thomas Nephawe ◽  
Matodzi Nancy Lambani

<p class="Default"><strong>Abstract.</strong><strong> </strong>The mastery of the irregular form of verbs in the past simple tense poses challenges to non-native learners of English all over the world. The objectives of this study were to identify the types of learners’ strategies useful for mastering the irregular verb inflection, to describe and evaluate them, and to establish why the English First Additional Language learners face difficulties in mastering those strategies. The study followed a quantitative research design. A questionnaire was used as an instrument for data collection from the respondents. Data were analysed using the Statistical Package for Social Sciences version 22 to ensure valid interpretations. Subsequent themes were placed in a table and a graph dealing with the inflection of irregular verbs. The target group of this study comprised 21 Grade 10 learners who were attending Dimani Secondary School in Limpopo Province, South Africa during the academic year 2021. From the data analysis, the initial study findings established that the respondents were incompetent in mastering the inflection of irregular verbs in the past simple tense when using the suppletion principle and the terminal consonants phoneme changes. The researchers used the grouping of common irregular verbs and the learning of irregular verbs in sentences strategies because learners were different and learned irregular verb inflection differently. Although it was previously found that learners could not understand the inflection of irregular verbs in the past simple tense, after having utilised these two strategies, the inflection of irregular verbs in the past simple tense improved with tremendous results.</p><p class="Default"> </p><p>Keywords: Inflection; irregular verbs; past simple tense; strategies<em></em></p>


Author(s):  
G. Y. Fan ◽  
J. M. Cowley

It is well known that the structure information on the specimen is not always faithfully transferred through the electron microscope. Firstly, the spatial frequency spectrum is modulated by the transfer function (TF) at the focal plane. Secondly, the spectrum suffers high frequency cut-off by the aperture (or effectively damping terms such as chromatic aberration). While these do not have essential effect on imaging crystal periodicity as long as the low order Bragg spots are inside the aperture, although the contrast may be reversed, they may change the appearance of images of amorphous materials completely. Because the spectrum of amorphous materials is continuous, modulation of it emphasizes some components while weakening others. Especially the cut-off of high frequency components, which contribute to amorphous image just as strongly as low frequency components can have a fundamental effect. This can be illustrated through computer simulation. Imaging of a whitenoise object with an electron microscope without TF limitation gives Fig. 1a, which is obtained by Fourier transformation of a constant amplitude combined with random phases generated by computer.


Author(s):  
M. T. Postek ◽  
A. E. Vladar

Fully automated or semi-automated scanning electron microscopes (SEM) are now commonly used in semiconductor production and other forms of manufacturing. The industry requires that an automated instrument must be routinely capable of 5 nm resolution (or better) at 1.0 kV accelerating voltage for the measurement of nominal 0.25-0.35 micrometer semiconductor critical dimensions. Testing and proving that the instrument is performing at this level on a day-by-day basis is an industry need and concern which has been the object of a study at NIST and the fundamentals and results are discussed in this paper.In scanning electron microscopy, two of the most important instrument parameters are the size and shape of the primary electron beam and any image taken in a scanning electron microscope is the result of the sample and electron probe interaction. The low frequency changes in the video signal, collected from the sample, contains information about the larger features and the high frequency changes carry information of finer details. The sharper the image, the larger the number of high frequency components making up that image. Fast Fourier Transform (FFT) analysis of an SEM image can be employed to provide qualitiative and ultimately quantitative information regarding the SEM image quality.


1992 ◽  
Vol 1 (4) ◽  
pp. 52-55 ◽  
Author(s):  
Gail L. MacLean ◽  
Andrew Stuart ◽  
Robert Stenstrom

Differences in real ear sound pressure levels (SPLs) with three portable stereo system (PSS) earphones (supraaural [Sony Model MDR-44], semiaural [Sony Model MDR-A15L], and insert [Sony Model MDR-E225]) were investigated. Twelve adult men served as subjects. Frequency response, high frequency average (HFA) output, peak output, peak output frequency, and overall RMS output for each PSS earphone were obtained with a probe tube microphone system (Fonix 6500 Hearing Aid Test System). Results indicated a significant difference in mean RMS outputs with nonsignificant differences in mean HFA outputs, peak outputs, and peak output frequencies among PSS earphones. Differences in mean overall RMS outputs were attributed to differences in low-frequency effects that were observed among the frequency responses of the three PSS earphones. It is suggested that one cannot assume equivalent real ear SPLs, with equivalent inputs, among different styles of PSS earphones.


1971 ◽  
Vol 36 (4) ◽  
pp. 527-537 ◽  
Author(s):  
Norman P. Erber

Two types of special hearing aid have been developed recently to improve the reception of speech by profoundly deaf children. In a different way, each special system provides greater low-frequency acoustic stimulation to deaf ears than does a conventional hearing aid. One of the devices extends the low-frequency limit of amplification; the other shifts high-frequency energy to a lower frequency range. In general, previous evaluations of these special hearing aids have obtained inconsistent or inconclusive results. This paper reviews most of the published research on the use of special hearing aids by deaf children, summarizes several unpublished studies, and suggests a set of guidelines for future evaluations of special and conventional amplification systems.


2016 ◽  
Vol 17 (1) ◽  
pp. 66
Author(s):  
Maria Lina Silva Leite
Keyword(s):  

O objetivo deste estudo foi avaliar os efeitos do Método Pilates sobre a variabilidade da frequência cardíaca, na flexibilidade e nas variáveis antropométricas em indivíduos sedentários. O presente estudo contou com 14 voluntárias do sexo feminino, na faixa etária entre 40 e 55 anos, que realizaram 20 sessões de exercícios do Método Pilates, duas vezes por semana, com duração de 45 minutos cada sessão, dividida em três fases: repouso, exercício e recuperação. As variáveis estudadas foram: os dados antropométricos, flexibilidade avaliada utilizando o teste de sentar-e-alcançar com o Banco de Wells, e intervalos R-R usando um cardiotacômetro. O processamento dos sinais da frequência cardíaca foi efetuado em ambiente MatLab 6.1®, utilizando a TWC. Os dados coletados foram submetidos ao teste de normalidade de Shapiro Wilk e foi utilizado o teste de Wilcoxon e Anova One Way (α = 0,05). Nos resultados, observou-se que não houve diferenças significativas entre os valores antropométricos e de frequência cardíaca, porém houve aumento da flexibilidade com o treinamento. Comparando a primeira e a vigésima sessão com relação aos parâmetros low frequency (LF), high frequency (HF), e relação LF/HF, não houve diferença na fase de repouso e foram constatadas diferenças significativas de LF (p = 0,04) e HF (p = 0,04) na fase de exercício e diferença significativa de LF/HF (p = 0,05) na fase de recuperação. Comparando os parâmetros nos períodos de repouso, exercícios e recuperação durante a primeira sessão e durante a vigésima sessão, não houve diferença significativa nos parâmetros LF, HF e LF/HF. Pode-se concluir que, em relação à flexibilidade, foi observada uma melhora significativa, enquanto a análise da frequência cardíaca caracterizou a intensidade do exercício de 50% da capacidade funcional das voluntárias. Em relação aos parâmetros LF, HF e LF/HF foram observados um aumento da variabilidade da frequência cardíaca, provavelmente produto da atividade do Método Pilates. A Transformada Wavelet (TWC) mostrou-se um Método adequado para as análises da variabilidade da frequência cardíaca.Palavras-chave: frequência cardíaca, Transformada Wavelet, Pilates.


1998 ◽  
Vol 2 ◽  
pp. 115-122
Author(s):  
Donatas Švitra ◽  
Jolanta Janutėnienė

In the practice of processing of metals by cutting it is necessary to overcome the vibration of the cutting tool, the processed detail and units of the machine tool. These vibrations in many cases are an obstacle to increase the productivity and quality of treatment of details on metal-cutting machine tools. Vibration at cutting of metals is a very diverse phenomenon due to both it’s nature and the form of oscillatory motion. The most general classification of vibrations at cutting is a division them into forced vibration and autovibrations. The most difficult to remove and poorly investigated are the autovibrations, i.e. vibrations arising at the absence of external periodic forces. The autovibrations, stipulated by the process of cutting on metalcutting machine are of two types: the low-frequency autovibrations and high-frequency autovibrations. When the low-frequency autovibration there appear, the cutting process ought to be terminated and the cause of the vibrations eliminated. Otherwise, there is a danger of a break of both machine and tool. In the case of high-frequency vibration the machine operates apparently quiently, but the processed surface feature small-sized roughness. The frequency of autovibrations can reach 5000 Hz and more.


2019 ◽  
Vol 85 (1(I)) ◽  
pp. 64-71 ◽  
Author(s):  
M. M. Gadenin

The cycle configuration at two-frequency loading regimes depends on the number of parameters including the absolute values of the frequencies and amplitudes of the low-frequency and high-frequency loads added during this mode, the ratio of their frequencies and amplitudes, as well as the phase shift between these harmonic components, the latter having a significant effect only with a small ratio of frequencies. Presence of such two-frequency regimes or service loading conditions for parts of machines and structures schematized by them can significantly reduce their endurance. Using the results of experimental studies of changes in the endurance of a two-frequency loading of specimens of cyclically stable, cyclically softened and cyclically hardened steels under rigid conditions we have shown that decrease in the endurance under the aforementioned conditions depends on the ratio of frequencies and amplitudes of operation low-frequency low-cycle and high-frequency vibration stresses, and, moreover, the higher the level of the ratios of amplitudes and frequencies of those stacked harmonic processes of loading the greater the effect. It is shown that estimation of such a decrease in the endurance compared to a single frequency loading equal in the total stress (strains) amplitudes can be carried out using an exponential expression coupling those endurances through a parameter (reduction factor) containing the ratio of frequencies and amplitudes of operation cyclic loads and characteristic of the material. The reduction is illustrated by a set of calculation-experimental curves on the corresponding diagrams for each of the considered types of materials and compared with the experimental data.


Sign in / Sign up

Export Citation Format

Share Document