TEM FIB Lift-Out of Mount Saint Helens Volcanic Ash

1999 ◽  
Vol 5 (S2) ◽  
pp. 908-909
Author(s):  
J.L. Drown-MacDonald ◽  
B.I. Prenitzer ◽  
T.L. Shofner ◽  
L.A. Giannuzzi
Keyword(s):  
Cross Sections ◽  
Volcanic Ash ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Specimen Preparation ◽  
Preparation Technique ◽  
Tem Analysis ◽  
Plan View ◽  
Transmission Electron ◽  
Silver Paint

Focused Ion Beam (FIB) specimen preparation for both scanning and transmission electron microscopy (SEM and TEM respectively) has seen an increase in usage over the past few years. The advantage to the FIB is that site specific cross sections (or plan view sections) may be fabricated quickly and reproducibly from numerous types of materials using a finely focused beam of Ga+ ions [1,2]. It was demonstrated by Prenitzer et al. that TEM specimens may be acquired from individual Zn powder particles by employing the FIB LO specimen preparation technique [3]. In this paper, we use the FIB LO technique to prepare TEM specimens from Mount Saint Helens volcanic ash.Volcanic ash from Mount Saint Helens was obtained at the Microscopy and Microanalysis 1998 meeting in Atlanta. TEM analysis of the ash was performed using the FIB lift out technique [1]. Ash powders were dusted onto an SEM sample stud that had been coated with silver paint.

Revisiting the FIB TEM Lift-Out Specimen Preparation Technique

2000 ◽  
Vol 6 (S2) ◽  
pp. 508-509
Author(s):  
L. A. Giannuzzi ◽  
F. A. Stevie
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Subsequent Development ◽  
Specimen Preparation ◽  
Preparation Technique ◽  
Tem Analysis ◽  
Plan View ◽  
Geological Materials ◽  
Transmission Electron ◽  
Primary Advantage

In recent years, the focused ion beam (FIB) instrument has developed into a mainstay tool for the production of specimens for both scanning and transmission electron microscopy ((S)TEM). The inception and subsequent development of the FIB TEM lift-out (LO) technique has enabled electron transparent membranes of generally uniform thickness to be produced for TEM analysis. In general, the primary advantage of the FIB is that site specific sections may be fabricated quickly (e.g., < 1 hour) and reproducibly. Specifically, the FIB LO technique has been used extensively in our laboratories to produce on the order of a thousand Si-based specimens per year and hundreds of other specimens per year that have included metals, ceramics, composites, biological materials, geological materials, polymers, particles, and fibers, prepared in cross-section, plan view, and from fracture surfaces.

A Tutorial of the Fib Lift-Out Technique for TEM Specimen Preparation

1999 ◽  
Vol 5 (S2) ◽  
pp. 516-517
Author(s):  
Lucille A. Giannuzzi
Keyword(s):  
Cross Sections ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Subsequent Development ◽  
Bulk Sample ◽  
Specimen Preparation ◽  
Tem Analysis ◽  
Plan View ◽  
Area Of Interest ◽  
Wide Range

The focused ion beam (FIB) instrument has been developed and exploited by the microelectronics arena for specimen preparation for both scanning and transmission electron microscopy (TEM). The inception [1] and subsequent development [2] of the FIB TEM lift-out (LO) technique has enabled electron transparent membranes of generally uniform thickness to be produced for TEM analysis. The primary advantage of the FIB technique is that site specific cross sections (or plan view sections [3]) may be fabricated quickly and reproducibly. The FIB LO technique has been used extensively in our laboratory for a wide range of materials [4] and biological applications [5] which are summarized in figure 1.The FIB LO method consists of milling a series of trenches around an area of interest. Then the bulk sample is tilted up to ∼60 degrees to allow the beam to impinge on the lower portion of the specimen surface so that cuts can be made along the bottom edge and the lower 2/3 of the distance up one side of the specimen.

Transmission Electron Microscopy (TEM) Specimen Preparation Technique using Focused Ion Beam (FIB): Application to Material Characterization of Chemical Vapor Deposition of Tungsten (W) and Tungsten Silicides (WSix)

1997 ◽  
Author(s):  
K. Doong ◽  
J.-M. Fu ◽  
Y.-C. Huang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Chemical Vapor ◽  
Specimen Preparation ◽  
Preparation Technique ◽  
Transmission Electron

Abstract The specimen preparation technique using focused ion beam (FIB) to generate cross-sectional transmission electron microscopy (XTEM) samples of chemical vapor deposition (CVD) of Tungsten-plug (W-plug) and Tungsten Silicides (WSix) was studied. Using the combination method including two axes tilting[l], gas enhanced focused ion beam milling[2] and sacrificial metal coating on both sides of electron transmission membrane[3], it was possible to prepare a sample with minimal thickness (less than 1000 A) to get high spatial resolution in TEM observation. Based on this novel thinning technique, some applications such as XTEM observation of W-plug with different aspect ratio (I - 6), and the grain structure of CVD W-plug and CVD WSix were done. Also the problems and artifacts of XTEM sample preparation of high Z-factor material such as CVD W-plug and CVD WSix were given and the ways to avoid or minimize them were suggested.

A Methodology to Reduce Ion Beam Induced Damage in TEM Specimens Prepared by FIB

2002 ◽  
Author(s):  
Chin Kai Liu ◽  
Chi Jen. Chen ◽  
Jeh Yan.Chiou ◽  
David Su
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Sample Preparation ◽  
Integrated Circuit ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Specimen Preparation ◽  
Tem Analysis ◽  
Sensitive Issue ◽  
Transmission Electron

Abstract Focused ion beam (FIB) has become a useful tool in the Integrated Circuit (IC) industry, It is playing an important role in Failure Analysis (FA), circuit repair and Transmission Electron Microscopy (TEM) specimen preparation. In particular, preparation of TEM samples using FIB has become popular within the last ten years [1]; the progress in this field is well documented. Given the usefulness of FIB, “Artifact” however is a very sensitive issue in TEM inspections. The ability to identify those artifacts in TEM analysis is an important as to understanding the significance of pictures In this paper, we will describe how to measure the damages introduced by FIB sample preparation and introduce a better way to prevent such kind of artifacts.

scholarly journals Using a Focused Ion Beam (FIB) System to Extract TEM-Ready Samples from Complex Metallic and Ceramic Structures

1999 ◽  
Vol 7 (2) ◽  
pp. 12-15 ◽  
Author(s):  
Lucille A. Giannuzzi ◽  
Richard Young ◽  
Pete Carleson
Keyword(s):  
Focused Ion Beam ◽  
Preparation Method ◽  
Ion Beam ◽  
Specimen Preparation ◽  
Magnetic Media ◽  
Tem Analysis ◽  
Micro Fabrication ◽  
Site Specific ◽  
Transmission Electron ◽  
Two Sides

AbstractDriven by the analytical needs of microelectronics, magnetic media and micro-fabrication industries, focused ion beam (FIB) systems are now capable of milling and manipulating samples for the analysis of microstructure features having dimensions of 180 nm or less, A technique for locating and extracting site specific specimens for examination by transmission electron microscopy (TEM) has been developed. An identified feature can be located and precisely milled with an FIB system from two sides to prepare an ultrathin sample, and then extracted from the region with a glass rod micromanipulator onto a grid for TEM analysis. This specimen preparation method has been applied to semiconductor failure analysis and to the study of metallic and ceramic microsiructures with irregular topographies and complex mufti-layered components.

Microstructural Characterization of Automated Specimen Preparation for TEM Analysis

2000 ◽  
Vol 6 (S2) ◽  
pp. 528-529
Author(s):  
C. Urbanik Shannon ◽  
L. A. Giannuzzi ◽  
E. M. Raz
Keyword(s):  
Focused Ion Beam ◽  
Preparation Method ◽  
Ion Beam ◽  
Microstructural Characterization ◽  
Specimen Preparation ◽  
Tem Analysis ◽  
Area Of Interest ◽  
Transmission Electron ◽  
Preparation Techniques

Automated specimen preparation for transmission electron microscopy has the obvious advantage of saving personnel time. While some people may perform labor intensive specimen preparation techniques quickly, automated specimen preparation performed in a timely and reproducible fashion can significantly improve the throughput of specimens in an industrial laboratory. The advent of focused ion beam workstations for the preparation of electron transparent membranes has revolutionized TEM specimen preparation. The FIB lift-out technique is a powerful specimen preparation method. However, there are instances where the “traditional” FIB method of specimen preparation may be more suitable. The traditional FIB method requires that specimens must be prepared so that the area of interest is as thin as possible (preferably less than 50 μm) prior to FIB milling. Automating the initial specimen preparation for brittle materials (e.g., Si wafers) may be performed using the combination of cleaving and sawing techniques as described below.

Pin-Point Transmission Electron Microscopic Analysis Applied to Off-Leakage Failures of a Bipolar Transistor in 0.5μm BiCMOS Devices

1996 ◽  
Author(s):  
M. Okihara ◽  
H. Tanaka ◽  
N. Hirashita ◽  
T. Nakamura ◽  
H. Okada ◽  
...  
Keyword(s):  
Large Scale ◽  
Ion Beam ◽  
Microscopic Analysis ◽  
Bipolar Transistor ◽  
Specimen Preparation ◽  
Preparation Technique ◽  
Electron Microscopic ◽  
Tem Analysis ◽  
Transmission Electron ◽  
Wide Range

Abstract Pin-point (specific area) planar transmission electron microscopy (TEM) analysis has been improved to study process-induced defects in recent very large scale integrated (VLSI) devices. The specimens are prepared by a combination of marking failure sites with focused ion beam (FTB) equipment and planar TEM specimen preparation technique. This method provides not only planar observation of localized failures with an accurate observation with high positioning accuracy but also wide range of observable area which is feasible to carry out some application techniques associated with TEM. In particular, it is found to be a powerful method to identify the nature of crystalline defects which cause the failures. This work presents the detailed procedure and demonstrates its successful applicability via studying a leaky bipolar transistor in 0.5μm BiCMOS devices (one failure of more than 4500 transistors). The results clarify the presence of stacking faults, formed during epitaxial growth, between collector and emitter regions in the specific transistor with resistive collector-emitter leakage current.

Sign in / Sign up

Export Citation Format

Share Document