Relocating Features Across Microanalytical Instrumentation

1998 ◽  
Vol 4 (S2) ◽  
pp. 526-527
Author(s):  
William H. Powers ◽  
Frederick H. Schamber
Keyword(s):  
Compositional Analysis ◽  
Optical Microscope ◽  
The Other ◽  
Depth Of Field ◽  
Large Depth ◽  
Contrast Mechanisms ◽  
Backscattered Electron ◽  
The Difference ◽  
Distinguishing Features

The ability to investigate a particular feature or region of a specimen using differing kinds of analytic instrumentation can be a very valuable technique. For example, an object viewed under an optical microscope provides color, polarization, and reflectance information which is not available via SEM viewing. Similarly, the SEM with its large depth of field and ability to utilize secondary and backscattered electron contrast mechanisms, and its capability to perform compositional analysis via EDS, provides information which the optical microscope cannot. Thus, the information provided by the two instruments is complementary.Desireable though it may be to view the same feature of a specimen via differing instruments, this is often difficult to execute in practice. The difference in contrast mechanisms which makes the excercise valuable may also make it difficult to relate the distinguishing features viewed under one instrument with those viewed in the other. Further, the issue of scale creates a large complication in many practical instances.

Relocating Features Across Microanalytical Instrumentation

1998 ◽  
Vol 4 (S2) ◽  
pp. 524-525
Author(s):  
William H. Powers ◽  
Frederick H. Schamber
Keyword(s):  
Compositional Analysis ◽  
Optical Microscope ◽  
The Other ◽  
Depth Of Field ◽  
Large Depth ◽  
Contrast Mechanisms ◽  
Backscattered Electron ◽  
The Difference ◽  
Distinguishing Features

The ability to investigate a particular feature or region of a specimen using differing kinds of analytic instrumentation can be a very valuable technique. For example, an object viewed under an optical microscope provides color, polarization, and reflectance information which is not available via SEM viewing. Similarly, the SEM with its large depth of field and ability to utilize secondary and backscattered electron contrast mechanisms, and its capability to perform compositional analysis via EDS, provides information which the optical microscope cannot. Thus, the information provided by the two instruments is complementary.Desireable though it may be to view the same feature of a specimen via differing instruments, this is often difficult to execute in practice. The difference in contrast mechanisms which makes the excercise valuable may also make it difficult to relate the distinguishing features viewed under one instrument with those viewed in the other. Further, the issue of scale creates a large complication in many practical instances.

scholarly journals Super-Resolution and Large Depth of Field Model for Optical Microscope Imaging

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Ruo-Peng Zheng ◽  
Shu-Bin Liu ◽  
Lei Li
Keyword(s):  
Network Model ◽  
Signal To Noise Ratio ◽  
Numerical Aperture ◽  
Super Resolution ◽  
Structural Similarity ◽  
Optical Microscope ◽  
Optimal Approximation ◽  
Depth Of Field ◽  
Large Depth ◽  
Potential Applications

Due to the limitation of numerical aperture (NA) in a microscope, it is very difficult to obtain a clear image of the specimen with a large depth of field (DOF). We propose a deep learning network model to simultaneously improve the imaging resolution and DOF of optical microscopes. The proposed M-Deblurgan consists of three parts: (i) a deblurring module equipped with an encoder-decoder network for feature extraction, (ii) an optimal approximation module to reduce the error propagation between the two tasks, and (iii) an SR module to super-resolve the image from the output of the optimal approximation module. The experimental results show that the proposed network model reaches the optimal result. The peak signal-to-noise ratio (PSNR) of the method can reach 37.5326, and the structural similarity (SSIM) can reach 0.9551 in the experimental dataset. The method can also be used in other potential applications, such as microscopes, mobile cameras, and telescopes.

Development of 200 kV Scanning-Transmission Electron Microscope

1974 ◽  
Vol 32 ◽  
pp. 410-411
Author(s):  
H. Koike ◽  
S. Sakurai ◽  
K. Ueno ◽  
M. Watanabe
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Scanning Transmission Electron Microscope ◽  
The Other ◽  
Morphological Observation ◽  
Magnetic Domains ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Backscattered Electron ◽  
Increasing Demand

In recent years, there has been increasing demand for higher voltage SEMs, in the field of surface observation, especially that of magnetic domains, dislocations, and electron channeling patterns by backscattered electron microscopy. On the other hand, the resolution of the CTEM has now reached 1 ∼ 2Å, and several reports have recently been made on the observation of atom images, indicating that the ultimate goal of morphological observation has beem nearly achieved.

Improvements on the gaseous detector device

1986 ◽  
Vol 44 ◽  
pp. 630-631 ◽  
Author(s):  
G.D. Danilatos
Keyword(s):  
Gaseous Medium ◽  
The Other ◽  
Beam Specimen ◽  
Thin Wires ◽  
Interference Noise ◽  
Backscattered Electron ◽  
Detection Of Signals ◽  
Environmental Sem

The possibility of placing the specimen in a gaseous medium in the environmental SEM (ESEM) has created novel ways for detection of signals from the beam-specimen interactions. It was originally reported by Oanilatos that the ionization produced by certain signals inside the conditioning medium can be used to produce images. The aim of this report is to demonstrate some of the improvements on the system that have occurred thereafter.Two straight thin wires are aligned horizontally along a direction normal to the direction of the two scintillator backscattered electron (BSE) detectors reported elsewhere. The free end tips of the wires are about 5 mm apart halfway between the specimen and the pressure limiting aperture (specimen distance = 1.5 mm). The other end of each wire makes contact with the input of a separate preamplifier, two of which are built inside a shielding aluminum stub. With such a design, interference noise from the input cables is avoided.

A correlation of CL emissions from Penrith sandstone with elemental distributions obtained by simultaneous SEM-CL and EDS analysis

1995 ◽  
Vol 53 ◽  
pp. 392-393
Author(s):  
Paul J. Wright
Keyword(s):  
Optical Microscope ◽  
Electron Gun ◽  
High Electron ◽  
Collection System ◽  
Electron Hole ◽  
Depositional Processes ◽  
Eds Analysis ◽  
Distribution Mapping ◽  
Backscattered Electron ◽  
Electron Imaging

Most industrial and academic geologists are familiar with the beautiful red and orange cathodoluminescence colours produced by carbonate minerals in an optical microscope with a cold cathode electron gun attached. The cement stratigraphies interpreted from colour photographs have been widely used to determine the post depositional processes which have modified sedimentary rock textures.However to study quartzose materials high electron densities and kV's are necessary to stimulate sufficient emission. A scanning electron microscope with an optical collection system and monochromator provides an adequate tool and gives the advantage of providing secondary and backscattered electron imaging as well as elemental analysis and distribution mapping via standard EDS/WDS facilities.It has been known that the incorporation of many elements modify the characteristics of the CL emissions from geological materials. They do this by taking up positions between the valence and conduction band thus providing sites to assist in the recombination of electron hole pairs.

Compositional Analysis of III-V Interface Lattice Images

1980 ◽  
Vol 38 ◽  
pp. 318-319
Author(s):  
A. Olsen ◽  
J.C.H. Spence ◽  
P. Petroff
Keyword(s):  
Crystal Structure ◽  
Image Matching ◽  
Compositional Analysis ◽  
Depth Of Field ◽  
Limit Set ◽  
High Contrast ◽  
Resolution Limit ◽  
Fourier Image ◽  
Lattice Images ◽  
True Structure

Since the point resolution of the JEOL 200CX electron microscope is up = 2.6Å it is not possible to obtain a true structure image of any of the III-V or elemental semiconductors with this machine. Since the information resolution limit set by electronic instability (1) u0 = (2/πλΔ)½ = 1.4Å for Δ = 50Å, it is however possible to obtain, by choice of focus and thickness, clear lattice images both resembling (see figure 2(b)), and not resembling, the true crystal structure (see (2) for an example of a Fourier image which is structurally incorrect). The crucial difficulty in using the information between Up and u0 is the fractional accuracy with which Af and Cs must be determined, and these accuracies Δff/4Δf = (2λu2Δf)-1 and ΔCS/CS = (λ3u4Cs)-1 (for a π/4 phase change, Δff the Fourier image period) are strongly dependent on spatial frequency u. Note that ΔCs(up)/Cs ≈ 10%, independent of CS and λ. Note also that the number n of identical high contrast spurious Fourier images within the depth of field Δz = (αu)-1 (α beam divergence) decreases with increasing high voltage, since n = 2Δz/Δff = θ/α = λu/α (θ the scattering angle). Thus image matching becomes easier in semiconductors at higher voltage because there are fewer high contrast identical images in any focal series.

Enhancement of ADP-induced Platelet Aggregation by Adrenaline in Vivo and Its Prevention

1973 ◽  
Vol 29 (02) ◽  
pp. 490-498 ◽  
Author(s):  
Hiroh Yamazaki ◽  
Itsuro Kobayashi ◽  
Tadahiro Sano ◽  
Takio Shimamoto
Keyword(s):  
Platelet Count ◽  
Platelet Aggregation ◽  
Platelet Rich Plasma ◽  
The Other ◽  
Endothelial Surface ◽  
Important Interaction ◽  
Blood Coagulability ◽  
The Difference

SummaryThe authors previously reported a transient decrease in adhesive platelet count and an enhancement of blood coagulability after administration of a small amount of adrenaline (0.1-1 µg per Kg, i. v.) in man and rabbit. In such circumstances, the sensitivity of platelets to aggregation induced by ADP was studied by an optical density method. Five minutes after i. v. injection of 1 µg per Kg of adrenaline in 10 rabbits, intensity of platelet aggregation increased to 115.1 ± 4.9% (mean ± S. E.) by 10∼5 molar, 121.8 ± 7.8% by 3 × 10-6 molar and 129.4 ± 12.8% of the value before the injection by 10”6 molar ADP. The difference was statistically significant (P<0.01-0.05). The above change was not observed in each group of rabbits injected with saline, 1 µg per Kg of 1-noradrenaline or 0.1 and 10 µg per Kg of adrenaline. Also, it was prevented by oral administration of 10 mg per Kg of phenoxybenzamine or propranolol or aspirin or pyridinolcarbamate 3 hours before the challenge. On the other hand, the enhancement of ADP-induced platelet aggregation was not observed in vitro, when 10-5 or 3 × 10-6 molar and 129.4 ± 12.8% of the value before 10∼6 molar ADP was added to citrated platelet rich plasma (CPRP) of rabbit after incubation at 37°C for 30 second with 0.01, 0.1, 1, 10 or 100 µg per ml of adrenaline or noradrenaline. These results suggest an important interaction between endothelial surface and platelets in connection with the enhancement of ADP-induced platelet aggregation by adrenaline in vivo.

Energy Approximation

2017 ◽  
Author(s):  
Philip Isett
Keyword(s):  
Main Lemma ◽  
The Other ◽  
Coarse Scale ◽  
Continuous Solutions ◽  
Material Derivative ◽  
Energy Variation ◽  
Energy Approximation ◽  
The Difference ◽  
Derivatives Of

This chapter presents the equations and calculations for energy approximation. It establishes the estimates (261) and (262) of the Main Lemma (10.1) for continuous solutions; these estimates state that we are able to accurately prescribe the energy that the correction adds to the solution, as well as bound the difference between the time derivatives of these two quantities. The chapter also introduces the proposition for prescribing energy, followed by the relevant computations. Each integral contributing to the other term can be estimated. Another proposition for estimating control over the rate of energy variation is given. Finally, the coarse scale material derivative is considered.

Pengaruh Unsur Budaya Lokal dalam Ungkapan Berbahasa Perancis

Metahumaniora ◽  
2017 ◽  
Vol 7 (3) ◽  
pp. 378
Author(s):  
Vincentia Tri Handayani
Keyword(s):  
Mental Representation ◽  
Cultural Context ◽  
Oral Tradition ◽  
Minimal Element ◽  
The Other ◽  
Local Culture ◽  
Community Groups ◽  
Cultural Community ◽  
The Difference ◽  
Complex Words

AbstrakFolklor yang menghasilkan tradisi lisan merupakan perwujudan budaya yang lahirdari pengalaman kelompok masyarakat. Salah satu bentuk tradisi lisan adalah ungkapan yangmengandung unsur budaya lokal dalam konstruksinya yang tidak dimiliki budaya lainnya.Ungkapan idiomatis memberikan warna pada bahasa melalui penggambaran mental. Dalambahasa Perancis, ungkapan dapat berupa locution dan expression. Perbedaan motif acuansuatu ungkapan dapat terlihat dari pengaruh budaya masyarakat pengguna bahasa. Sebuahleksem tidak selalu didefinisikan melalui unsur minimal, tidak juga melalui kata-kata,baik kata dasar atau kata kompleks, namun dapat melalui kata-kata beku yang maknanyatetap. Hubungan analogis dari makna tambahan yang ada pada suatu leksem muncul dariidentifikasi semem yang sama. Semem tersebut mengarah pada term yang diasosiasikan danyang diperkaya melalui konteks (dalam ungkapan berhubungan dengan konteks budaya).Kata kunci: folklor, ungkapan, struktur, makna idiomatis, kebudayaanAbstractFolklore which produces the oral tradition is a cultural manifestation born out theexperience of community groups. One form of the oral tradition is a phrase that containsthe elements of local culture in its construction that is not owned the other culture. Theidiomatic phrase gives the color to the language through the mental representation. InFrench, the expression can consist of locution and expression. The difference motivesreference of an expression can be seen from the influence of the cultural community thelanguage users. A lexeme is not always defined through a minimal element, nor throughwords, either basic or complex words, but can be through the frost words whose meaningsare fixed. The analogical connection of the additional meanings is on a lexeme arises fromthe identification of the same meaning. The meaning ‘semem’ leads to the associated termsand which are enriched through the context (in idiom related to the cultural context).Keywords : folklore, idioms, structure, idiom meaning, cultureI PENDAHULUAN

Rhetoric and argumentation: the unity of the field

2017 ◽  
Author(s):  
Michel Meyer
Keyword(s):  
The Other ◽  
Classic Problem ◽  
False Dilemma ◽  
The Difference ◽  
As If

Rhetoric has always been torn between the rhetoric of figures and the rhetoric of conflicts or arguments, as if rhetoric were exclusively one or the other. This is a false dilemma. Both types of rhetoric hinge on the same structure. A common formula is provided in Chapter 3 which unifies rhetoric stricto sensu and rhetoric as argumentation as two distinct but related strategies adopted according to the level of problematicity of the questions at stake, thereby giving unity to the field called “Rhetoric.” Highly problematic questions require arguments to justify their answers; non-divisive ones can be treated rhetorically through their answers as if they were self-evident. Another classic problem is how to understand the difference between logic and rhetoric. The difference between the two is due to the presence of questions explicitly answered in the premises in logic and only suggested (or remaining indeterminate) in rhetoric.

Sign in / Sign up

Export Citation Format

Share Document